IoT News - Page 142 of 182 - CNX Software

October 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

VoCore2 WiFi IoT Board Launched with Audio, PoE & “Ultimate” Docks (Crowdfunding)

Vocore WiFi IoT board was popular at its launch in 2014 because affordable WiFi boards with I/Os were not common at the time, and it came with an Ethernet dock making it a complete router within a tiny and cute cube. The developers have been working on VoCore2 (aka Vocore V2) with a faster processor, more memory, a lower power consumption, a better WiFi signal, and more I/Os for several months, and have now launched the board on Indiegogo aiming to raise at least $6,000 for mass production. Vocore2 board specifications: SoC – Mediatek MT7628AN MIPS processor @ 580 MHz System Memory – 128 MB DDR2 Storage – 16MB NOR FLASH, 1x SDXC via I/O pins Connectivity WiFi 802.11n 2T2R up to 300 Mbps with either 2 u.FL connector or 1 u.FL connector + on-board chip antenna (Max signal output >19.5dbm peak) 2x 10/100M Ethernet interfaces via I/O pins I/Os […]

October 6, 2016March 19, 2022 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

Routers, IP Cameras/Phones & IoT Devices can be Security Risks even with the Latest Firmware, and a Strong Admin Password

I’ve just read an interesting article entitled “who makes the IoT things under attack“, explaining that devices connected to the Internet such as router, IP cameras, IP Phones, etc.. may be used by Botnet to launch DDoS attacks, and they do so using the default username and password. So you may think once you’ve updated the firmware when available, and changes the default admin/admin in the user interface, you’d be relatively safe. You’d be wrong, because the malware mentioned in the article, Mirai, uses Telnet or SSH trying a bunch of default username and password. That made me curious, so I scanned the ports on my TP-Link wireless router and ZTE ZXHN F600W fiber-to-the-home GPON modem pictured below, and installed by my Internet provider, the biggest in the country I live, so there may be hundred of thousands or millions of such modems in the country with the same default […]

October 4, 2016October 4, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek Introduces IP67 Rated Waterproof Embedded Computer for Outdoor Applications

Axiomtek has just launched eBOX800-841-FL rugged IP67-rated fanless embedded system for “outdoor critical applications” such as the Industrial Internet of Things (IIOT) gateways. The waterproof mini PC is powered by a quad core Intel Atom E3845 Bay Trail-I processor, and supports temperatures between -30°C to 60°C. Axiomtek eBOX800-841-FL embedded computer specifications: SoC – Intel Atom E3845 quad core processor @ up to 1.91 GHz with Intel HD graphics (10W TDP) System Memory – 204-pin SO-DIMM DDR3L-1066/1333 slot up to 8 GB RAM Storage – 1 x mSATA, 1x 2.5″ SATA HDD, 1x CFAST slot Video Output – VGA (M12 screw type) Connectivity 2x 10/100/1000Mbps Ethernet (M12 type) WiFI & LTE via mini PCIe slots 1x SIM socket 4x N-jack waterproof antenna connectors USB – 2x USB 2.0 ports (M12 type) Serial ports – 2 x RS-232/422/485 ports (M12 type) Expansion 1x full-size PCI Express Mini Card slot (USB + PCI […]

October 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Gumstix Nodana 96BCE 96Boards Compatible Baseboard Takes Intel Joule Module

96Boards is an initiative from Linaro, an engineering organization focusing on ARM development, to define some hardware and software specifications for development boards. But since 96Boards specifications are open, Gumstix decided to create the first x86 board compliant with 96Boards CE hardware specifications with Nodana 96BCE baseboard powered by Intel Joule Module. For obvious reasons, this will never be an officially supported 96Boards.org platform. Nodana 96BCE board specifications: SoM – Intel Joule Module based on Intel Atom T5700 or T5500 processor with up to 16GB storage, 4GB RAM. External Storage – 1x micro SD card Video Output – 1x HDMI port USB – 2x USB 3.0 ports, 1x USB 3.0 type C port Expansion Headers 96Boards Low Speed connector with I2C, SPI and UART 96Board High Speed connector with MIPI DSI and USB 2.0 Power Supply – 8 to 18 V (if it follows 96Boards CE specs) Dimensions – 85 […]

October 3, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Silicon Labs Introduces $29 Thunderboard React Bluetooth 4.2 LE IoT Board and $69 Derby Car Kit

Earlier this summer, Silicon labs launched ThunderBoard React, a Bluetooth 4.2 LE compliant board with sensors and expansion headers for IoT applications based on the company’s BGM111 Bluetooth Smart Module, and to make it much more fun to work with the company has released a Derby Car kit controlled by the board. ThunderBoard React specifications: Bluetooth Module – BGM111 Bluetooth 4.2 compliant module with integrated Tx and Rx antenna, and Cortex M4 MCU @ 38.4 MHz with 32 kB RAM and 256 kB Flash Extra Storage – Footprint for 8Mb external flash storage Sensors – Si7021 relative humidity and temperature, Si1133 UV index and ambient light sensor, Invensense MPU-6500 6-axis gyro/accelerometer, Si7201 hall effect position sensor Expansion – 12 breakout pina to connect to BGM111 GPIOs Debugging – 10-pin mini Simplicity debug connector Misc – 2x momentary buttons, 2x LEDs, power selection switch Power Supply – CR2032 coin cell battery […]

September 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Qualcomm is Finally Open for Business with Snapdragon 410E and 600E Processors for Embedded & IoT Applications

Qualcomm processors are found in mobile devices and wearables selling in large quantities, some boards and modules from embedded systems companies such as Inforce Computing and Intrinsyc, as well as it own 96Boards compliant DragonBoard 410c and DragonBoard 600c development boards, but it’s hard to find them in many other products, and few crowdfunding campaign feature Snapdragon processors, as Qualcomm may not be willing to work with smaller companies and startups. The company has made some progress in that regards with their partnership with Allwinner to allow smaller Chinese companies to manufacture Snapdragon based Tablets, and their newly introduced Snapdragon 410E and 600E processors targeting embedded systems and IoT applications, available from Arrow Electronics without questions asked, and with long term availability for 10 years, i.e. until 2025 based on available of Snapdragon 410 mobile version. Snapdragon 410E (APQ 8016E) specifications: CPU – Quad ARM Cortex A53 @ up to […]

September 28, 2016July 23, 2024 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

FriendlyARM Introduces NanoPi NEO AIR Board with WiFi & BLE, Camera Interface and 8GB Storage for $17.99

FriendlyARM launched NanoPi NEO board with Allwinner H3 processor, Ethernet, and USB ports for $7.99 to $9.99 in July, and the company is back with a new board with the same form factor and processor, by trading Ethernet for WiFi, dropping one USB 2.0 port for a DVP camera interface, and adding an 8GB eMMC flash. NanoPi NEO AIR specifications: SoC – Allwinner H3 quad-core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash (Samsung) + micro SD card slot Connectivity – WiFi 802.11 b/g/n and Bluetooth 4.0 LE (via Ampak AP6212 module) with IPEX antenna connector USB – 1x micro USB OTG port, 2x USB via headers Camera – 1x DVP camera interface with optional 5MP CAM500B camera Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin header […]