ios News - Page 8 of 20 - CNX Software

September 20, 2016October 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$16 and Up RGB LED Bluetooth 4.0 Light Bulbs include Speakers

I’ve just stumbled upon “H1007 Smart E27 Bulb Bluetooth 4.0 Speaker” on GeekBuying. It’s a smart Bluetooth 4.0 RGB LED E27 light bulb that also include a speaker, and sells for $22.59 shipped. I find it’s a good idea, and after looking for other models, I’ve found the $99 Twist light, as well as a much cheaper “OY-QP-BM13” model on eBay going for $15.99. I’ll look at (HZ-)H1007 specifications first: Light Bulb 5W; adjustable RGBW; 330 Lumens; Color temp: 6500K Screw Type – E27/E26 Connectivity – Bluetooth 4.0 LE up to 20 meters range Audio – 3W amplifier; 3D surround audio Voltage – 100 to 240V 50/60Hz Dimensions – 72 mm diameter x 136 mm length Weight – 146 grams The body of the light bulb is available in white, red, golden, and blue, and it ships with a user’s manual in English and Chinese. I could not find the […]

September 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Sonoff TH10/16 WiFi Relays Support Temperature and Humidity Probes

Sonoff are dirt cheap WiFi AC/DC relay systems based on ESP8266 selling for about $5 with board and case. They are made by ITEAD Studio, and the company has now new versions supporting up to 16A @ 250V, and with a 2.5mm connector to connect external temperature and humidity probes. Two models are available Sonoff-TH10 (10A max) and Sonoff-TH16 (16A max) with the following specifications: SoC – Espressif ESP8266 Tensila L106 32-bit MCU up to 80/160 MHz with WiFi Connectivity – 802.11 b/g/n WiFi with WPA/WPA2 support Relay Sonoff-TH10 – HK3FF-DC5V-SHG supporting 90 to 250 VAC input, up to 10A (2200 Watts) Sonoff-TH16 – Hongfa HF152F-T supporting 90 to 250 VAC input, up to 16A (3500 Watts) Terminals – 6 terminal for mains and load’s ground, live and neutral signals. Misc – 4-pin 2.5mm jack for external probes, LEDs for power and WiFi status Dimensions – PCB: 89.1 x 45.0 […]

August 29, 2016August 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Broadlink MP1 is a $20 WiFi Power Strip with 4 Independent Sockets

There are plenty of WiFi sockets going around such as Broadlink SP2 or Kankun KK-SP3, but in some cases it might be both more convenient and cheaper to get a WiFi power strip, and Broadlink MP1 offers just that with 4 sockets that can be controlled and programmed (timer) independently, and sold for just $19.88 on Banggood. Broadlink MP1 specifications: Connectivity – 802.11b/g/n WiFi, controllable over 3G/4G with smartphone 4 multi-standard (EU/US/AU, but not UK) sockets Power input – 10A/250V (max) Power output – 10A/250V (max) Rated power – 2000W Total Misc – Power button Dimensions – 254mm x 60mm x 32mm; 50cm sockets spacing; cord Length – 1.5m with AU plug (Adapter provided for other countries) Weight – 450g The power strip can be controlled via Broadlink ihc (Intelligent Hone Control) app available for Android and iOS, which lets you independently manually turn on or off or set timers […]

August 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

TW68 Smart Bracelet Measures Blood Pressure and Heart Rate for $22 and Up

Some people may need to frequently measure their blood pressure because of their health condition, but it’s often a cumbersome experience, so they may get lazy, and not do it as often as needed. TW68 smart bracelet should make this easy, as it’s your typical fitness tracker with an heart rate monitor, but adding the capability to also measure blood pressure. It’s also very cheap, and I first found it on DealExtreme where it sells for just $24. TW68 specifications: MCU – Nordic Semi NRF51822 ARM Cortex M0 micro-controller with 2.4 GHz radio Data Storage – 7 days detailed data, 23 days total data Connectivity – Bluetooth 4.0 LE Display – 0.49″ OLED display Sensors – PixArt-PAH8001EI blood pressure sensor; 6-axis Invensense-MPU6500 accelerometer and gyroscope Function Health tracker: Blood pressure measurement, Heart rate monitor, Pedometer, Sleep tracker Other functions: Call/Message notification, Fall reminder, Social sharing, Time, Alarm clock Misc – […]

July 29, 2016January 22, 2025 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

FTLAB FSG-001 is a $30 Geiger Counter / Radiation Detector for Android & iOS Smartphones

I’ve just read an article on Tizen.org about Samsung and Intersoft Eurasia’s collaboration about a “personal radiation monitoring device DO-RA” sending data over Bluetooth 4.0 LE. But a visit to their website showed other models such as DO-RA-Q using a 3.5mm audio jack, and compatible with smartphones, and Windows & Linux computers. I could not find any of their devices for sale, so I searched for alternatives and found FTLAB FSG-001 radiation counter on Aliexpress, Amazon, and eBay selling between $30 and $40. FTLAB FSG-001 Geiger counter specifications: Radiation measurement of: gamma, X-rays Measurement range – 0.1 to 200 μSv/h Measurement error – <30% within a given deviation between Dimensions – Φ10 x 30 mm (total length: 47mm with 3.5mm audio jack) Weight – 6 grams Operating temperature – 10 to 40 ℃ You’ll need to plug the dongle into your smartphone audio jack, and download FTLAB “SmartGeiger” app for […]

July 26, 2016July 26, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Bagel is a Smart Bluetooth Tape Measure Compatible with Android and iOS Phones (Crowdfunding)

The tape measure is a pretty simple tool allowing you to measure length, and I assume most people will write results on a piece of paper. Battery powered Bagel tape measure changes that as it allows measurements with a string, through a wheel, or an ultrasonic sensors, store the data in its internal memory with voice to text memo, and also sends back data over Bluetooth to your smartphone. Bagel Labs tape measure specifications: Three measure modes – string (up to 3 meters), wheel (up to 10 meters), or ultrasonic sensor (0.3 to 5 meters) Storage – 32 MB flash for up to 100 measurements and voice memo (Both metric and imperial units supported) Connectivity – Bluetooth 4.0 LE Audio – Microphone for voice to text recording Display – 0.96″ OLED display; 128×96 resolution USB – 1x micro USB port for charging Misc – laser pointer for ultrasonic measurement; save […]

July 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$16 Bluetooth 4.0 LE Bracelet Monitors Babies’ Temperature

With electronics getting cheaper and smaller everyday, I’m expecting medical diagnostic / monitoring tools with become more convenient and affordable, and products from the more advanced Scanadu, to much simpler Bluetooth blood pressure monitors will help people better monitor their health themselves. I’ll also getting frequent request about the availability of soon-to-be FDA approved Omron Project Zero blood pressure smartwatch. Today I’ve come across a simple $16.51 Bluetooth Smart bracelet that could be useful to monitor the temperature of sick babies or very young children. Technical specifications: Connectivity – Bluetooth 4.0 LE with up 18 meters range Sensor – Temperature between 32 and 43 degree Celsius with -/+ 0.1 deg. accuracy Smartphone compatibility – Android 4.3+ or IOS 7.0+ Functions – Thermometer; Temperature Alarm; Medical Records; Health Management, Cloud Backup. Power Supply – CR2032 battery Wristband Length – 14~19cm Weight – 19 g The band must be worn in such as […]

July 17, 2016July 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Wanscam HW0029-4 is a Solar Powered All Weather IP Security Camera with WiFi, 3G/4G Connectivity

I’ve just watched a video on ARMDevices.net about Enlaps Tikee solar powered device designed to take timelapses over several days and transfer the pictures / video over WiFi, 3G, or 4G. The project has been fully funded on Indiegogo at the beginning of the year, and shipping is scheduled for Q4 2016. It looks like an interesting device for a niche market, but since I’ve noticed some products launched on Kickstarter already exists in one form or another in China, I’ve decided to have a look on Aliexpress, and I found Wanscan HW00269-4 solar powered camera with 3G/4G connectivity, and while it addresses a completely different need, as a 720p IP security camera, I still decided to have a closer look. Wanscam HW0029-4 specifications: SoC – Hisilicon Hi3518E ARM9 processor @ 440 MHz Storage – Built-in 16GB, expandable to 128GB Camera / video recording 1/2 1MP Star light CMOS sensor 8mm […]