infrared News - Page 4 of 5 - CNX Software

October 27, 2017October 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Use your Smartphone as an IR Remote Control with ROCK USB Type C IR Remote Control Transmitter

A few years ago, I wrote about ZazaRemote transforming your smartphone into a universal IR remote control. ZazaRemote is a hardware and software solution that combines infrared dongles micro USB port or 3.5mm audio plug, and a mobile app that allows you to control all sort of devices (TV, aircon, etc…) from your smartphone. Over three years later, more and more phones are now deprived from the audio jack, and micro USB ports have given way to USB type C ports, so that solution does not work anymore on newer phones. Some of the recent phones like Xiaomi Mi A1 integrate an IR transmitter, but for others, Zazaremote’s developer (Tiqiaa) has apparently not come up with a USB type C version, but just sells micro USB to USB type C adapters, not the most convenient. Upon further research, I eventually found a USB type C IR transmitter for smartphone sold […]

October 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

RedRat-X IR, Bluetooth & RF4CE Box Can Control Multiple TVs and Set-top Boxes

IR blasters can be used to control multiple IR devices through infrared, or other interfaces, for example DVR can use such device to change the channel of a set-top box just before recording. RedRat-X is one of those devices for automating control of TVs, STBs and other infrared equipment, but it’s quite more versatile, as beside its built-in IR blaster, it adds 3 IR outputs were you can connect your own IR transmitters, as well as USB and Ethernet for remote controls. Furthermore, it can also take add-on modules to emulate Bluetooth and RF4CE remote controls. RedRat-X specifications: IR blaster via the front of the unit. 0 mA to 250 mA in 100 steps. 3x plug-in IR jack sockets which can be used in two modes: Current mode (default): For use with plug-in IR flashers – 0mA to 100mA in 100 steps. Voltage mode: To interface to IR distributions systems, […]

July 10, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Flic Hub Controls WiFi, Bluetooth, and IR Devices with Bluetooth LE Buttons (Crowdfunding)

This week-end, I wrote about 1btn open source WiFi button that can allow you directly control WiFi appliances, and/or set scenes without the need for a smartphone. We also discussed limitations of WiFi due to high power consumption, security issues and the one-way aspect of RF communication, and that Bluetooth 5 may be a better option for range and battery life if possible. Flic Hub is another way to approach the issue, as it combines Bluetooth LE buttons with a gateway supporting WiFi, Bluetooth, and infrared. Flic Hub gateway specifications: Connectivity – Bluetooth Classic, Bluetooth LE, WiFi, Ethernet, IR via optional add-on accessory. Audio – 3.5mm audio out/mic in Power Supply – 5V via micro USB Power Consumption – 1.5W typ. Security – SPARKE2+ Bluetooth encryption Dimensions – 85 x 50 x 15 mm Weight – 99 grams Users can configure workflows by setting up Flic with IFTTT, Zapier, Microsoft […]

May 30, 2017May 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Olimex ESP32-EVB Board with Ethernet, CAN Bus, and Relays up for Sale for 26 Euros

One of the new feature of Espressif ESP32 SoC over ESP8266 is the inclusion of an Ethernet MAC interface, but so far few boards come with an RJ45 jacks. ESP32 Monster board is an option, also including an OLED Display and CAN Bus, and sold on Tindie for $35, but Olimex has now stocked their ESP32-EVB board with Ethernet, CAN Bus, and two relays, and you can purchase it for 26 Euros per unit, and less in larger quantities. Olimex ESP32-EVB Rev. B specifications: Wireless Module – ESP32-WROOM32 module with 802.11 b/g/n WiFi and Bluetooth LE Wired Connectivity – 10/100M Ethernet with RJ45 jack (via LAN8710A) External Storage – micro SD slot Relays – 2x 10A/250VAC relays with LED status Expansion 40-pin GPIO female header (2.54mm pitch) UEXT connector for sensors and modules CAN Bus USB – 1x micro USB port for debugging (CH340T) and power Misc – Reset and […]

April 20, 2017April 22, 2017 by Karl Johnson - 4 Comments

Karl’s Home Automation Project – Part 4: MQTT Bridge Updated to Use YS-IRTM IR Receiver & Transmitter with NodeMCU

In a previous article, I wrote about an MQTT bridge by 1technophile. I added a DHT temperature and humidity sensor as well as a light sensor. Previously it included a software decoder to decode the IR signal. I never did test the IR transmitter on the gateway, as I didn’t have the parts. But thanks to IC Station, who sent me over a small YS-IRTM hardware based decoder and NodeMCU that I am writing about today. I have replaced the software based version with the YS-IRTM module in the latest update. I found this project challenging. I admit I am a little weak in my programming skills. It was difficult to find documentation but I found a forum talking about this device and basics of how it works. When an IR code is recognized it sends 3 hex codes via serial connection on the transmit pin. To transmit, it expects […]

March 12, 2017March 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

How to Control Your Air Conditioner with Raspberry Pi Board and ANAVI Infrared pHAT

Leon ANAVI may be a full-time software engineer, but in his spare time he has started to develop open source hardware project with the help of others and by himself. Last year, I got hold of his RabbitMax Flex HAT for Raspberry Pi, and tested it with the provided LCD display, one temperature sensor, and a Raspberry Pi 2 board. The board also featured IR receiver & transmitter, and I tried to use it with my aircon remote control, but at the time I did not find a way to do it easily, and control my TV with LIRC instead. Leon has now made a simpler, smaller, and cheaper add-on board for Raspberry Pi Zero, and other Raspberry Pi boards with a 40-pin header, with 3x I2C headers, two IR transmitters, and one IR receiver. He sent me a sample of “ANAVI Infrared pHAT”, and after quickly describing the board, […]

November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Sevenhugs Smart Remote is a Universal Direction Aware WiFi, Bluetooth and IR Remote Control (Crowdfunding)

You may have all sort of remote control devices around your home from the traditional IR remote control for your TV, air conditioner, audio system etc.., as well remote control apps for WiFi or Bluetooth objects such as smart light bulbs or water pumps running on your smartphone. Sevenhugs Smart Remote promises to replace them all, and all you have to do is to point the remote control to your devices, or setup virtual actions to your door or window to order a Uber drive or check the weather. Sevenhugs Smart Remote specifications: MCU – ARM Cortex-M4 @ 200 MHz System Memory – 32 MB RAM LCD – 3.43″ touch screen IPS display; Dragontrail damage ans scratch resistant cover glass, anti-fingerprint & anti-glare Wireless Connectivity – IR transceiver, 802.11 b/g/n WiFi and Bluetooth 4.1 LE connectivity USB – USB C port for charging Sensors – Indoor positioning sensor, accelerometer, gyroscope, […]

June 28, 2016March 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Broadlink RM Mini 3 is a $10 WiFi IR Blaster for Home Automation

Many electrical appliances such as TVs, air conditioners, heaters, and so on are still controlled using an infrared remote control, but as more and more people are getting used to their smartphone to control pretty much everything, devices such as Xiaomi Mi Smart Remote Center that allows to control IR appliances with ANdroid or iOS mobile are starting to come to market. However during my Smart Remote Center review, I noticed that the app was only available in Chinese, and that it was not quite able to perform all the tasks I wanted (e.g. multiple IR codes programming). There’s now a cheaper and small device available in the form of Broadlink RM Mini 3 “Black Bean” that sells for just $9.88 including shipping, and whose app supports not only Chinese, but also English, Russian, Japanese, and other languages. Broadlink RM mini 3 specifications: WiFi – 802.11 b/g/n @ 2.4 GHz […]