industrial News - Page 84 of 85 - CNX Software

January 29, 2016January 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Intrinsyc Open-Q 600 Single Board Computer is Powered by Qualcomm Snapdragon 600 Processor

Intrinsyc has released several Qualcomm Snapdragon development kits and system-on-modules over the last few years, and the company has now unveiled their first single board computer with Open-Q 600 SBC powered by Snapdragon 600 quad core processor with 2GB RAM and 16GB eMMC flash. Open-Q 600 specifications: SoC – Qualcomm Snapdragon 600 (APQ8064) quad core Krait 300 processor @ 1.7GHz with 2MB L2 cache, Adreno 320 GPU, and Hexagon QDSP6V4 DSP System Memory – 2GB PCDDR3 RAM @ 533MHz; dual channel 32-bit Storage – 16GB eMMC 4.5 flash, micro SD card slot Video Output / Display I/F – HDMI 1.4a port for up to 1080p @ 60Hz, 2-lane MIPI-DSI connector Audio – HDMI, 3.5mm stereo headset output with mono input, 3.5mm Mic line in; Qualcomm WCD9311 audio codec Camera – 2-lane MIPI-CSI connector supporting 8 MP camera up to WXGA resolution @ 60 fps Connectivity Gigabit Ethernet (RJ45) via Qualcomm […]

January 28, 2016January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

BeagleBone Black Industrial 4G is Red, and Offers an Extended Temperature Range

BeagleBone Black is a great little board for hobbyists with plenty of I/Os, and decent software support, but the development board has not been designed to be used in low or high temperatures as found in some industrial settings, so Element14 has designed BeagleBone Black Industrial 4G with the same specifications as BeagleBone Black Rev C, but a red PCB, support for an extended temperature range between -20 and +85°C, and additional board protection with a conformal coating. BeagleBone Black Industrial 4G Specifications: SoC – Texas Instruments Sitara AM3358BZCZA10 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot Video Out/Display I/F – HDMI and LCD interfaces Connectivity – 10/100M Ethernet (RJ45) Serial Port – UART0 access via 6 pin 3.3V TTL Header. Header is populated USB – USB 2.0 Client port: Access to […]

January 10, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYiR Tech Introduces Atmel SAMA5D4 CPU Module and Development Board

MYiR Tech has launched a new development board – MYD-JA5D4X – featuring their Atmel SAMA5D4 Cortex A5 system-on-module called MYC-JAD5D4X with 512MB DDR2, 512MB Flash, and various ports such as Fast Ethernet, RS485, LCD panel interface, USB connectors and so on. Target applications include control panel/HMI, fitness equipment, smart grid infrastructure, communications gateways, and imaging terminals among others. Let’s start wit the MYC-JAD5D4X CPU module specifications: SoC – Atmel SAMA5D42 or SAMA5D44 ARM Cortex-A5 processor @ up to 600MHz (945DMIPS) with NEON and FPU, 720p hardware video decoder (SAMA5D44 only) System Memory– 512MB (2x 256MB) DDR2 SDRAM Storage – 512MB NAND Flash, 4MB Data Flash, 64KB EEPROM Connectivity – On-board Ethernet PHY I/Os via 200-pin SO-DIMM edge connector 2 x Ethernet 3 x USB2.0 Host 8 x Serial ports 4 x TWI, 3 x SPI 5 x 12-bit ADC 1 x SMD 4 x 4-bit SDIO 1 x LCD 1 x ISI 7 […]

December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

TI SimpleLink CC1310 Wireless MCU Promises 20 Km Range, 20-Year Battery Life on a Coin Cell

Some LPWAN standards such as SigFox, LoRa, or nWave allows for transmission of data at low bitrate over several kilometers, and I’ve very recently featured Microchip’s LoRa modules and motes in this blog. So when Texas Instruments sent their December 2015 newsletter entitled Wireless MCU spans 20 km on a coin cell, I decided to have a look, and the company’s CC1310 wireless Cortex-M3+M0 MCU based on a proprietary sub GHz technology also claims to last 20-year on a coin cell for applications such as grid communication infrastructure and heat and water meters. SimpleLink CC1310 key features: Microcontroller – ARM Cortex-M3 @ up to 48 MHz with up to 128KB programmable flash, 8KB DRAM for cache/general purpose, 20KB Ultralow Leakage SRAM Sensor Controller – Ultralow power and autonomous; 16-Bit Architecture; 2KB of Ultralow Leakage SRAM for code and data RF core Cortex M0 core with 4KB RAM, and ROM Data […]

December 3, 2015December 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Axiomtek MANO300 Industrial mini-ITX Board Features Intel Celeron N3150 Processor, Plenty of Interfaces

Axiomtek MANO300 is an industrial grade fanless mini-ITX motherboard powered by an Intel Celerron N3150 “Braswell” quad core processor with two SO-DIMM slots, two SATA interfaces, dual Gigabit Ethernet, several serial interfaces and more, targeting automation and embedded industries. MANO300 board specifications: SoC – Intel Celeron N3150 quad core Braswell processor @ up to 2.08 GHz with Intel HD Gen8 Graphics System Memory – 2x 204-pin SO-DIMM dual channel DDR3L-1333 up 8 GB Storage – 1 x SATA-600, 1x mSATA, SDXC card slot Display – 1x VGA, 1x HDMI, 1x LVDS (Up to 3 independent displays supported) Connectivity – 2 x 10/100/1000Mbps (Realtek RTL8111F) Serial 2x RS-232/422/485 (DB9) 4x RS-232 (one with 5V/12V power select) via connectors USB – 4x USB 3.0 host ports, 2x USB 2.0 (internal) Audio – Mic-in/Line-out Expansion – 1x PCIe x1, 1x PCI Express Mini Card with SIM card slot, 8x digital I/Os Misc – […]

December 3, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

iWave Systems iW-RainboW-G20M-Q7 SoM Features Renesas RZ/G1M Cortex A15 SoC

iWave Systems has unveiled a new Qseven 2.0 compliant system-on-module part of their RainboW family with iW-RainboW-G20M-Q7 module powered by Renesas RZ/G1M dual core ARM Cortex A15 SoC, and targeting industrial and automotive applications with over 10 years of support. iW-RainboW-G20M-Q7 module specifications: SoC – Renesas RZ/G1M dual core ARM Cortex A15 @ 1.5GHz with PowerVR SGX544MP2 GPU @ 520MHz System Memory – 1GB DDR3(expandable) Storage – 4GB eMMC Flash (expandable) + 2MB SPI NOR Flash for boot code, and optional Micro SD Slot Connectivity – 1x Gigabit Ethernet PHY USB – 2 Port USB HUB I/Os via 230-pin Qseven edge connector: Storage – 1x SATA , 1x SDHC USB – 1x USB3.0 host, 2x USB 2.0 hosts, or 1x USB 2.0 device Display – 1x LVDS Connectivity – 1x Gigabit Ethernet Audio – 1x I2S Audio 2x PWM, 2x I2C, SPI, CAN, UART, GPIOs 1x PCIe (multiplexed with SATA) JTAG or […]

November 18, 2015November 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Kondor AX FPGA + ARM Networking Board Targets Base Stations, IoT Gateways and IP Cameras

Mikro Project, a company based in Zagreb, Croatia, has recently introduced Kondor AX “Advanced System Development Board” combining Freescale i.MX6Solo processor with Lattice ECP5 FPGA, and targeting “low power applications at the network edge including HetNet (Heterogeneous Networks), Small Cells, Industrial IoT gateways and IP Cameras.” Kondor AX development board specifications: Category Lattice ECP5 LFE5UM-85F-BG756 FPGA Freescale i.MX6 Solo SoC Description 84.000 LUTs 207 Block RAMs 156 18×18 Multipliers 365 IO pins 4 SERDES channels (In/out) 400 MHz LPDDR3 Memory Support 4 PLLs, 4 DLLs ARM Cortex A9 @ 1 GHz 512 KB L2 cache GPU 3D – Vivante GC880 Video Decode: 1080p30 + D1 Video Encode: 1080p30 H.264 BP/ Dual 720p encode Programming options On-board USB JTAG interface 10-pin JTAG header Using i.MX6 processor Memory & Storage 512MB LPDDR3-1600 800 MHz Clock Rate 1x 32-bit channel 512 MB 32-bit DDR3 64Mbit SPI Flash 8GB eMMC Micro SD Card Connectivity […]

November 17, 2015November 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Compulab Unveils CL-SOM-iMX7 Freescale i.MX7 System-on-Module and SBC-iMX7 Single Board Computer

After a few years of speculations and developments about i.MX7 and i.MX8 processors, Freescale announced Freescale i.MX7 family this summer. The new processors are based on one or two Cortex A7 cores coupled with a Cortex-M4 MCU for real-time tasks, and are a low power alternative to Freescale i.MX6 processors. But so far I had only seen a few announcements such Toradex i.MX7 SoM or Freescale 96Boards, without any product actually shipping, and Compulab claims to the first to market with a Freescale i.MX7 system-on-module, namely their CL-SOM-iMX7 SoM which will ship in quantities in early January 2016. CL-SOM-iMX7 system-on-module specifications: SoC Freescale i.MX 7Solo single core Cortex-A7 @ 800MHz with NEON SIMD and VFPv4 + ARM Cortex-M4 @ 200Mhz Freescale i.MX 7Dual dual core Cortex-A7 @ 1GHz with NEON SIMD and VFPv4 + ARM Cortex-M4 @ 200Mhz System Memory – 256MB to 2GB DDR3L-1066 Storage – 128MB – 1GB […]