industrial

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Chipsee introduces 7-inch and 10.1-inch industrial panel PCs powered by Raspberry Pi CM5

Chipsee introduces 7-inch and 10.1-inch industrial panel PCs powered by Raspberry Pi CM5

Raspberry Pi CM5 Panel PCs

Chipsee has introduced three new panel PCs powered by the Raspberry Pi Compute Module 5 (CM5), namely the EPC-CM5-070, PPC-CM5-070, and PPC-CM5-101, designed for automation, manufacturing, and industrial applications. The EPC-CM5-070 is a compact 7-inch open frame embedded panel PC with armored glass, the PPC-CM5-070 is also a 7-inch panel PC but with VESA/panel mounting and a rugged metal enclosure, and the PPC-CM5-101 features a 10.1-inch touchscreen display and support for an extended temperature range. Chipsee EPC-CM5-070 – A 7-inch open frame panel PC Specifications: SoM – Raspberry Pi CM5 with Broadcom BCM2712 quad-core Cortex-A76 SoC, 4GB or 8GB RAM, 32GB eMMC flash Storage MicroSD card slot M.2 M-Key 2230/2242 (PCIe Gen2 x1) socket for NVMe SSD Display – 7-inch display with 1024×600 resolution, 5-point capacitive touchscreen, 500 NIT brightness Video Output – HDMI port Audio 3.5mm audio out jack Internal 2W Speaker Buzzer Camera – Optional support Networking Gigabit […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on AAEON GENE-MTH6 3.5-inch Meteor Lake SBC offers up to 96GB of DDR5, 9-36V wide power input, PCIe Gen4 FPC connector

AAEON GENE-MTH6 3.5-inch Meteor Lake SBC offers up to 96GB of DDR5, 9-36V wide power input, PCIe Gen4 FPC connector

AAEON GENE-MTH6 3.5-inch meteor lake SBC

AAEON GENE-MTH6 Intel Meteor Lake-powered 3.5-inch “Subcompact” SBC takes up to 96GB DDR5, offers an ERP-compliant 9V-36V wide power input range, and includes an unusual PCIe Gen4 x4 FPC connector to add an M.2 expansion module, or other custom modules. The board also features two 2.5GbE and one GbE port, supports WiFi 6 and 5G via M.2 sockets, a SATA port and an M.2 socket for storage expansion, four display interfaces, a few USB ports, four internal COM ports for RS232 and/or RS485, and more. It is offered with either 15W U-Series (Intel Core Ultra 5 125U / Core Ultra 7 155U) or 28W H-series (Intel Core Ultra 5 125H / Core Ultra 7 155H) processors. AAEON GENE-MTH6 specifications: Meteor Lake SoC (one or the other) Intel Core Ultra 7 155H 16-core/22-thread processor up to 4.8 GHz with 24MB cache, Intel 8Xe LPG graphics @ 2.25 GHz, Intel AI Boost […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on UP Squared 7100 fanless SBC Review – Part 1: Unboxing and first boot to Ubuntu Pro 24.04

UP Squared 7100 fanless SBC Review – Part 1: Unboxing and first boot to Ubuntu Pro 24.04

UP Squared 7100 review

AAEON sent me a sample of the UP Squared 7100 fanless industrial SBC for review. The board is powered by an Intel N97 or N100 Alder Lake-N SoC (Amston Lake processors will be offered soon), and is equipped with up to 16GB LPDDR5 RAM and 128GB eMMC flash, plus two M.2 sockets for wireless and storage expansion. You’ll find the full specifications in our earlier article. I’ll start the review with an unboxing to check out the hardware, before booting it to Ubuntu Pro 24.04 LTS to check out some basic system information. In a few weeks, I’ll report my experience after in-depth testing in Ubuntu in the second part of the review which will include features testing from gigabit Ethernet to GPIO, some benchmarks, and power consumption measurements. UP Squared 7100 unboxing I received the UP Squared 7100 board in a retail package that reads “Are you UP for […]

Posted on by Debashis Das - No Comments on SparkFun Digi X-ON LoRaWAN development kit combines Digi HX15 gateway with RP2350 IoT node and environmental sensors module

SparkFun Digi X-ON LoRaWAN development kit combines Digi HX15 gateway with RP2350 IoT node and environmental sensors module

SparkFun Digi X ON Kit

SparkFun has recently released the Digi X-ON LoRaWAN development kit an all-in-one IoT development kit designed to simplify the setup and deployment of LoRa-based IoT systems. It includes the Digi HX15 Gateway, SparkFun IoT Node for LoRaWAN, and the ENS160/BME280 environmental sensor, enabling rapid prototyping and connectivity with the help of the Digi X-ON cloud platform. The SparkFun IoT Node is built around the Raspberry Pi RP2350 microcontroller, which features 16MB flash, 8MB PSRAM, multiple GPIOs, LiPo battery support, microSD storage, and USB-C connectivity. It also integrates the Digi XBee LR module for long-range LoRaWAN communication with pre-activated cloud connectivity. With an onboard Qwiic connector and Arduino support, this development kit is ideal for applications like industrial monitoring, environmental sensing, smart agriculture, remote data collection, and more. Digi HX15 gateway specifications Microprocessor – STMicro STM32MP157C MPU with dual-core Cortex A7 @ 650 MHz, Cortex-M4 @ 209 MHz with FPU/MPU, 3D […]

Posted on by Debashis Das - No Comments on Infineon PSOC Control C3x real-time Cortex-M33 MCUs are designed for motor control and HVAC systems

Infineon PSOC Control C3x real-time Cortex-M33 MCUs are designed for motor control and HVAC systems

infineon PSOC Control C3 MCU for for Motor Control and Power Conversion

Infineon recently launched the PSOC Control C3x family of Arm Cortex-M33 MCUs for real-time control applications in motor control and power conversion systems. The family includes 18 MCUs categorized into two lines, the Entry Line (C3P2, C3M3) and the Main Line (C3P5, C3M5). These MCUs can be used for various applications including home appliances, industrial drives, robots, light electric vehicles (LEVs), solar systems, and HVAC systems. The Entry Line operates at up to 100 MHz and supports a 12-bit SAR ADC with a sampling rate of up to 6 Msps, making it suitable for basic motor control and power conversion tasks. In contrast, the Main Line offers higher performance with up to 180 MHz operation, a faster 12-bit SAR ADC up to 12 Msps, and 4-channel High-Resolution PWM (HRPWM) for precise control. It also supports Wide Bandgap (WBG) switches for high-frequency power systems. Other features of this MCU include DSPs, FPUs, […]

Posted on by Debashis Das - 6 Comments on NXP EdgeLock A30 Secure Authenticator chip enables battery authentication for compliance with EU regulation 2023/1542

NXP EdgeLock A30 Secure Authenticator chip enables battery authentication for compliance with EU regulation 2023/1542

NXP EdgeLock A30 secure authenticator

NXP recently launched the EdgeLock A30 Secure Authenticator chip, a Common Criteria EAL 6+ certified secure authentication designed for IoT devices, including battery authentication applications. It complies with the EU’s Batteries Regulation 2023/1542, which mandates the inclusion of a Digital Product Passport (DPP), by 2027 to ensure traceability, sustainability, and safety in battery manufacturing and recycling. Alasdair Ross, Senior Director, NFC IoT Security, NXP explains: Secure authentication helps to ensure brand protection, consumer safety, and product traceability, fostering trust and shielding devices from physical damage. Smaller than a grain of rice, the EdgeLock A30 is designed to fit into even the smallest of devices. It supports multiple authentication use cases, making it easier for developers to support a variety of devices and accessories with a single solution, including device to device, cloud to device, counterfeit protection, and storage or protection of device identity. To address these requirements NXP’s EdgeLock A30 […]

Posted on by Debashis Das - 2 Comments on Phison’s aiDAPTIV+ AI solution leverages SSDs to expand GPU memory for LLM training

Phison’s aiDAPTIV+ AI solution leverages SSDs to expand GPU memory for LLM training

Phison's aiDAPTIVCache family support 70B model

While looking for new and interesting products I found ADLINK’s DLAP Supreme series, a series of Edge AI devices built around the NVIDIA Jetson AGX Orin platform. But that was not the interesting part, what got my attention was it has support for something called the aiDAPTIV+ technology which made us curious. Upon looking we found that the aiDAPTIV+ AI solution is a hybrid (software and hardware) solution that uses readily available low-cost NAND flash storage to enhance the capabilities of GPUs to streamline and scale large-language model (LLM) training for small and medium-sized businesses. This design allows organizations to train their data models on standard, off-the-shelf hardware, overcoming limitations with more complex models like Llama-2 7B. The solution supports up to 70B model parameters with low latency and high-endurance storage (100 DWPD) using SLC NAND. It is designed to easily integrate with existing AI applications without requiring hardware changes, […]

Posted on by Debashis Das - No Comments on Intel N50 fanless open-frame panel PCs features 7” and 10” PCAP touch display, HDMI 2.0a, RS-485/232

Intel N50 fanless open-frame panel PCs features 7” and 10” PCAP touch display, HDMI 2.0a, RS-485/232

BCM OFT10W ADLN Open Frame touch LCD computer

BCM Advanced Research has recently introduced two new fanless open-frame panel PCs powered by an Intel Processor N50 CPU – the OFT07W-ADLN (7-inch) and OFT10W-ADLN (10-inch) – which are low-cost all-in-one embedded computers designed for tablet-like usability. Both modules feature 8GB LPDDR5 memory, 64GB eMMC storage, and an M.2 E-key slot for Wi-Fi/Bluetooth connectivity. These panel PCs come with PCAP touchscreens (800×1280 for 7-inch and 1200×1920 for 10-inch) with various connectivity options including USB, HDMI 2.0a, RS-232/485, and Gigabit Ethernet. With 12-24V DC input supply, fanless operation, and a durable steel frame, these compact open-frame panel PCs are meant for space-constrained applications like HMIs, self-service kiosks, gaming consoles, medical terminals, smart vending machines, digital signage, and more. BCM OFT07W-ADLN and OFT10W-ADLN specifications: SoC – Intel Processor N50 dual-core processor up to 3.4 GHz with 6MB cache, 16EU Intel UHD Graphics; TDP: 6W System Memory – Up to 8GB LPDDR5 onboard Storage – […]

Exit mobile version
UP 7000 x86 SBC