industrial

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on M5Stack Atom DTU LoRaWAN Kit also supports WiFi, RS485, Modbus communication

M5Stack Atom DTU LoRaWAN Kit also supports WiFi, RS485, Modbus communication

ESP32 WiFI, Bluetooth, LoRaWAN, and RS485 kit

M5Stack is known for its ESP32 based building blocks for the IoT with WiFi & Bluetooth wireless connectivity, I/O headers, and block-specific features like a tiny color display, a speaker, a touchscreen display, a camera, and more. The company’s latest product is the M5Stack Atom DTU LoRaWAN Kit based on ESP32 ATOM Lite, as well as ASR Micro ASR6501 LoRa module (SX1302 based) and one RS485 header that allows for industrial communication notably with the Modbus protocol. M5Stack Atom DTU LoRaWAN Kit specifications: Wireless connectivity  M5Stack ATOM Lite with ESP32 WiFi 4 and Bluetooth 4.2/5.x dual-core SoC ASR ASR6501 LoRa chip Operating frequency – 868MHz or 915 MHz Transmit power – Up to +21dBm RX sensitivity – Up to -137dBm (SF=12/BW=125KHz) Serial communication – UART 115200bps (AT command) via ESP32 Antenna – SMA antenna connector Power consumption @ 3.3V (from ASR6501 datasheet) Tx @ +21dBm – 106 mA Rx – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on 10BASE-T1L Ethernet chips enable up to 1.7 kilometer long Ethernet cables

10BASE-T1L Ethernet chips enable up to 1.7 kilometer long Ethernet cables

10BASE-T1L device

The maximum length of Ethernet cables used to be 100 meters. While that may be more than enough for most applications, it does not cut it for industrial communication applications.  So the 10BASE-T1L Ethernet physical layer standard (IEEE 802.3cg-2019) was approved by the IEEE on November 7, 2019 to allow for cables over one kilometer using a single twisted-pair cable. Analog Devices has launched two 10BASE-T1L Ethernet chips with ADIN1100 Ethernet PHY and ADIN1110 Ethernet MAC-PHY that allow for up to 1.7 kilometer long Ethernet cables. Let’s check out ADIN1100 specifications for reference: 10BASE-T1L IEEE Std 802.3cg-2019 compliant Cable Reach 1700 meters+ with 1.0 V pk-pk 1700 meters+ with 2.4 V pk-pk Auto-Negotiation capability Supports intrinsic safety applications MII, RMII & RGMII MAC interfaces MDIO Management Interface Unmanaged configuration using pin strapping including: Master/Slave selection Transmit amplitude PHY address 25 MHz crystal oscillator/25 MHz external clock input (50 MHz external […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on TI AM64x 7-core processor is made for PLC’s, motor drives, industrial robots

TI AM64x 7-core processor is made for PLC’s, motor drives, industrial robots

AM64x GP EVM development platform

Texas Instruments AM64x is a family of 64-bit Arm processors with functional safety designed for Programmable Logic Controllers (PLC), motor drives, remote I/O, and industrial robots. The top-end processor of the family, AM6442, comes with seven cores including two Cortex-A53 application cores, four Cortex-R5F real-time cores, and one Cortex-M4F isolated core. AFAICT, while the documentation is dated January 2021 and TI announced the processor in February in a blog post with a cryptic title, it was only first picked up by Embedded Computing in early May. Besides the processor itself, TI also provides an AM64x starter kit and a full-featured AM64x evaluation kit, and several companies are already preparing development boards and modules as we’ll see further below. TI AM64x processor AM64x key features & specifications: CPU cores Dual-core Arm Cortex-A53 processor @ 1.0 GHz with 256KB L2 shared cache with SECDED ECC, 32KB L1 D-cache, 32KB L1 I-cache Up […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on NVIDIA Jetson AGX Xavier Industrial module adds lockstep Cortex-R5 cluster, ECC RAM, and more

NVIDIA Jetson AGX Xavier Industrial module adds lockstep Cortex-R5 cluster, ECC RAM, and more

NVIDIA Jetson AGX Xavier Industrial

NVIDIA Jetson AGX Xavier is the most powerful module from the Jetson family packing 32 TOPS of AI inference performance. But with some customers wanting to use the embedded AI computer in harsher conditions, the company has now introduced a rugged version of the module with NVIDIA Jetson AGX Xavier Industrial. Some changes included a slightly lower performance (30 TOPS) to cater for an expanded temperature range, a dual-core Cortex-R5 cluster in lockstep, ECC memory, and compliance with shock and vibration standards. NVIDIA Jetson AGX Xavier Industrial specifications with bold highlights showing differences / new features: CPU – 8-core NVIDIA Carmel Arm v8.2 64-bit CPU with 8MB L2 + 4MB L3 GPU – NVIDIA Volta architecture with 512 NVIDIA CUDA cores and 64 Tensor cores for up to 20 TOPS (INT8) (Note: the standard version support 22 TOPS) DL Accelerator – 2x NVDLA accelerators for up to 10 TOPS (INT8) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on EdgeBox-RPi4 industrial controller offers RS485, RS232 interfaces, isolated DI/DO

EdgeBox-RPi4 industrial controller offers RS485, RS232 interfaces, isolated DI/DO

EdgeBox-RPI4 Raspberry Pi CM4 industrial controller

OpenEmbed EdgeBox-RPi4 is an industrial controller based on Raspberry Pi Compute Module 4 fitted with up to 4GB RAM, 32GB eMMC flash, and a 2.4/5GHz WiFi & Bluetooth 5.0 wireless module. The controller exposes isolated RS485 & RS232 serial interfaces, as well as isolated digital inputs and outputs through a 16-pin terminal block, and provides Gigabit Ethernet and optional WiFI and 4G LTE connectivity options. EdgeBox-RPi4 specifications: SoM –  Raspberry Pi Compute Module 4 (CM4) with Broadcom BCM2711 quad-core Cortex-A72 processor running up to 1.5GHz in either two default configurations: 1GB RAM, 8GB flash, no wireless module 4GB RAM, 32GB flash, dual-band WiFi 5 and Bluetooth 5 module Storage – M.2 socket for NVMe SSD up to 2TB (See expansion) I/O interfaces via 16-pin terminal block Industrial-grade isolated 2x DI (Digital Inputs), 2x DO (Digital Outputs) Industrial-grade isolated RS485 interface RS232 interface Connectivity Gigabit Ethernet RJ45 port Optional WiFI 5 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on IP66 & IP69K-rated stainless steel fanless panel PC’s feature Kaby Lake processor

IP66 & IP69K-rated stainless steel fanless panel PC’s feature Kaby Lake processor

IP66 IP69K panel pc

Last year, we wrote about IP69K-Rated stainless steel panel PC’s made by ADLINK, powered by an Intel x7-E3950 quad-core Apollo Lake processor, equipped with a 15.6-inch to 23.9-inch display, and designed for special production environments including food, pharmaceutical, and chemical production. If you need an IP69K panel PC with a more powerful processor, Axiomtek has now introduced GOT815W-511 and GOT812W-511 15.6-inch and 12.1-inch stainless steel fanless touch panel computers powered by an Intel Core i5-7300U quad-core Kaby Lake processor, available with either IP69K/IP66 ingress protection rating. Axiomtek GOT815W-511 / GOT812W-511 specifications: SoC – Intel Core i5-7300U dual-core/quad-thread Kaby Lake processor @ 2.6 GHz / 3.5 GHz (Turbo) with Intel HD Graphics 620; 15W TDP System Memory – 1x 260-pin DDR4-2133 SO-DIMM for up to 16GB RAM Storage – 1x 2.5-inch SATA SSD or HDD (9.5 mm height max) LCD Panel GOT815W-511 – 15.6-inch TFT LCD with 1920 x 1080 pixels […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on 3.5-inch SBC targets industrial applications with 9-36V wide-range DC-in

3.5-inch SBC targets industrial applications with 9-36V wide-range DC-in

ECM-3455J 3.5-inch SBC

BCM Advanced Research ECM-3455J is an upcoming 3.5-inch SBC designed for industrial application with 9-36V wide range DC-in support, an Intel Celeron J3455 quad-core Apollo Lake processor, up to 8GB SO-DIMM memory, and 32GB on-board eMMC flash. The single board computer also comes with HDMI and LVDS video out, dual Gigabit Ethernet, an M.2 socket a micro SIM socket for cellular connectivity, as well as up to eight USB interfaces, and a thick and large heatspreader for fanless operation. ECM-3455J specifications: SoC – Intel Celeron J3455 quad-core Apollo Lake processor @ 1.5GHz / 2.3GHz (Burst Frequency) with Intel HD graphics 500; 10W TDP System Memory – 1x 204-pin SO-DIMM DDR3L-1600MHz socket for up to 8GB RAM Storage – 32GB eMMC flash (option: 64GB), 1x SATA III port, mSATA socket (See expansion), 64Mbit SPI flash for AMI UEFI BIOS Video Output 18/24-bit dual-channel LVDS through Chrontel CH7511B embedded DisplayPort to LVDS […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Ryzen Embedded V2000 mini-ITX industrial motherboard offers four DP++ video ports

Ryzen Embedded V2000 mini-ITX industrial motherboard offers four DP++ video ports

AMD Ryzen Embedded V2000 mini-ITX motherboard

DFI RNO171 is a mini-ITX industrial motherboard powered by an AMD Ryzen Embedded V2000 processor with up to 64GB RAM, two SATA ports, four DisplayPort++ video outputs, and plenty of I/Os including dual GbE, a PCIe x16 expansion slot, multiple USB and serial ports, and more. DFI RNO171 mini-ITX SBC specifications: SoC – AMD Ryzen V2000 Series Processors either: AMD Ryzen Embedded V2748, 8C/16T up to 2.9GHz (4.25GHz) with 4MB cache, 7 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2546, 6C/12T up to 3.0GHz (3.95GHz), with 3MB cache, 6 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2718, 8C/16T up to 1.7GHz (4.15GHz), with 4MB cache, 7 CU Radeon Vega graphics; 15W TDP AMD Ryzen Embedded V2516, 6C/12T up to 2.1GHz (3.95GHz), with 3MB cache, 6 CU Radeon Vega graphics; 15W TDP System Memory – Up to 64GB dual-channel DDR4 (ECC/non-ECC) via 2x  260-pin SODIMM sockets Storage […]