himedia News - CNX Software - Embedded Systems News

November 27, 2018November 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

HiMedia S1 TV Dongle Runs Android TV, Supports Netflix 4K

HiSilicon Hi3798MV200 media processor was announced in 2016 as a cost-down version of Hi3798CV200 processor for 4K TV boxes, and the next year I reviewed HiMedia Q30 TV box powered by the processor. Video playback was great with good 4K support and excellent video quality, although WiFi could have been better. Anyway, the processor has been around for a while, so yet another model with the SoC would not normally be newsworthy. Except HiMedia S1 is a little different, as the company confirmed the TV box is part of Netflix Hailstorm device scaling program meaning it officially supports Netflix 4K out of the box. HiMedia S1 specifications: SoC – HiSilicon Hi3798M V200 quad-core Arm Cortex A53 processor with Arm Mali-450MP GPU supporting OpenGL ES2.0/1.1, OpenVG1.1, EGL System Memory – 1 GB or 2 GB DDR3 Storage – 8 GB eMMC flash Video & Audio Output – Micro HDMI 2.0a up […]

November 15, 2018 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Hailstorm Device Scaling Program To Enable Netflix Support on Amlogic and HiSilicon TV Boxes

If you’ve ever bought a random TV box you may have found out Netflix does not always work optimally, for example, HD or 4K UHD may not be available due to the lack of DRM, and/or Netflix certification even if you’re paying extra for the service. So you need to make sure you get a certified device and there aren’t that many. But thanks to Netflix Hailstorm – a program aiming at scaling the number of device officially supporting Netflix – we should see more and more TV box running Android TV with full Netflix support. I found about the Hailstorm program via an Amlogic press release, but the photo above shows some TV boxes based on HiSilicon processors will also be supported, and TV boxes manufacturers such as SDMC, Skyworth, and Himedia have joined the program. Amlogic explains they have now achieved pre-certification for its Android TV set top […]

December 26, 2017June 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

What’s the Best Android TV Box (2017/2018 Edition)?

Since I was often asked which TV box to buy, I wrote a guide entitled “What’s the best Android TV box?” in April 2016. Time has passed, new products have launched, I tested more devices, and got further reader feedback, so it’s time for an update. There’s still no device that rules them all, and since everybody has different requirements and price points, what could the best Android TV box ever to one person, maybe be a piece of junk to another. Before purchasing a TV box, you should consider what you plan to do with it, and find the device with matches your needs and budget. So first, I’ll provide a list of things to look for – beside the SoC/RAM selection – before selecting three TV boxes that stand out (in no particular order), as well as alternatives worth looking at. Things to Look for The list is […]

December 13, 2017May 20, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

HiMedia Q10 Pro 4K TV Box Review – Part 2: Full Blu-ray Navigation & Playback

HiMedia Q10 Pro is an Android TV box powered by HiSilicon Hi3798CV200 SoC that was launched in March 2016, but the company recently provided a firmware update with support for Full Blu-ray navigation, and asked me to review that part. I received the device last month, posted the first part of the review with HiMedia Q10 Pro unboxing, and also explained how to install a 3.5″ SATA drive at the time. I’ve now acquired a few Blu-ray RIPs in order to test 4K Blu-ray video playback and navigation specifically. Initial Setup, Firmware Update, and Copying 4K Blu-ray Videos to the Hard Drive I connected the TV box to Onkyo TX-NR636 AV-Receiver, itself connected to LG 42UB820T 4K UHD television. If you’ve ever owned an HiMedia TV box the Android launcher should be familiar. If you want more details about the launcher, and user interface, checkout my HiMedia Q30 review. It’s […]

July 25, 2017July 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

HiMedia Q30 TV Box Review – Part 2: Android 7.0 Nougat Firmware

HiMedia Q30 is an Android Nougat TV box powered by Hisilicon Hi3798MV200 processor, a cost-down version of Hi3798C V200 processor with the same CPU, a lower-end Mali-450MP GPU, about the same media capabilities, and less I/Os. I’ve taken pictures of the device and board if the first part of the review entitled “HiMedia Q30 (Hisilicon Hi3798MV200) Android TV Box Review – Part 1: Unboxing and Teardown“, so today, I’ll report about my experience with the device while running Android 7.0. First Boot, Setup, and First Impressions I’ve connected a USB 3.0 hard drive to the single USB 3.0 port, and filled the two other USB 2.0 ports with a USB keyboard, and a USB hub with two RF dongles for an air mouse and a gamepad. I added Ethernet, HDMI, and power cable to start the device. A typical boot takes around 25 seconds to the Android launcher below. That’s […]

June 12, 2017August 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

HiMedia Q30 (Hisilicon Hi3798MV200) Android TV Box Review – Part 1: Unboxing and Teardown

I’ve often read praises about HiMedia TV boxes in the comments section of this blog, but so far, I had never tested any of their products. This is about to change, since the company has sent me their latest HiMedia Q30 TV box running Android 7.0 on Hisilicon Hi3798MV200 processor, a cost-down version of Hi3798CV200 processor with the same CPU,a lower-end Mali-T450 GPU, about the same media capabilities, and less I/Os. I’ll start the review by checking out the TV box and accessories, as well as the PCBA, before reporting the experience with Android 7.0 firmware in several weeks. HiMedia Q30 TV Box Unboxing I received the device is a package that read “HIMEDIA Q30” and “Android TV Box”, and shows some of the key features like 4K @ 60 fps, 10-bit HEVC, HDR and Kodi support. The devices ships with an IR remote control with IR learning function for […]

May 19, 2017June 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

HiMedia Q30 TV Box is Powered by HiSilicon Hi3798M V200 Processor

HiSilicon Hi3798M V200 processor is a cost-down version of Hi3798C V200 processor with a cheaper Mali-450MP GPU, a single Gigabit Ethernet MAC, a single USB 3.0 port shared with SATA and PCIe interface. One of the first devices with the processor will be Himedia Q30 TV box based on Himedia Q3 design. HiMedia Q30 specifications: SoC – HiSilicon Hi3798M V200 quad-core ARM Cortex A53 processor with an ARM Mali-450MP GPU supporting OpenGL ES2.0/1.1, OpenVG1.1, EGL, and System Memory – 2 GB DDR3 Storage – 8 GB eMMC flash, SD card slot Video Output – 1x HDMI 2.0a up to 4K @ 60 Hz, 1x composite video (RCA); Imprex 2.0 PQ engine with support for HDR/HLG/SLF/HDR to SDR, BT.709, and BT.2020 Audio Output – HDMI, stereo audio (RCA), optical S/PDIF port Video Engine – HiVXE 2.0 with support for HEVC 10-bit 4Kx2K @ 60 fps, H.264 4K2K @ 30 fps Connectivity […]

November 24, 2016July 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Himedia Q5 Pro & Q10 Pro TV Boxes Get Android 7.0 Nougat Firmware

The majority of TV boxes sold today are running Android 4.4 to Android 6.0, but with the release of Android 7.0 for smartphones and tablets earlier this year, it was just a question of time before the OS got ported to TV boxes. Himedia appears to be the first company to have released Android 7.0 for their Hisilicon Hi3798CV200 based TV boxes, namely Q5 Pro and Q10 Pro. The changelog for the new firmware includes: Android N OS running stable and smooth Support for Android N Google Play version Support for Samba UPnP System function perfectly upgraded from 5.1 to Android N with compatibility Youtube updated to 4.10.7 and Netflix to 1.3.11 Homepage, Application Management, Media Center optimized, focus movement are more swift and smooth Media Player upgraded and support mouse operation Local Media Playback Improved; Certain rare videos black screen, display ratio of 3D to 2D abnormal, and occasional […]