hevc News - Page 10 of 20 - CNX Software

February 11, 2016February 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

MINIX NGC-1 Review and Benchmarks with Windows 10 Home

MINIX NGC-1 mini PC is powered by an Intel Celeron N3150 quad core “Braswell” processor with 4GB RAM and a 128GB M.2SSD, and pre-loaded with Windows 10 Home. While the product aims to provide a convenient alternative to Intel NUC kits, as everything is pre-assembled and pre-installed, I’ll also compare the experience to Bay Trail and Cherry Trail mini PCs such as MeLE PCG03 or Tronsmart Ara X5. I’ve already provided NGC-1 specifications and some pictures, so today, I’ll test the capabilities of the device, and run some benchmarks in the review. MINIX NGC-1 Setup Once you’ve connected a USB keyboard and mouse, and the power supply, you are ready to start. Press the power button, the blue power will lit on the front of the device, and you’ll hear a beep and the very first time system will boot to Windows 10 setup screen where you’ll be asked to […]

January 30, 2016March 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Mini Review of G9C Android Media Player

Shenzhen Tomato sent me their G9C Android TV box at the beginning of December, but as Google Play was not working reliably in the first firmware, I decided to delay the review a little, and the company has provided a new working firmware a few weeks ago, and I’ve now taken the time to test some the main issues I normally find on Amlogic S905 Android TV box. I’ve also ready shown pictures of the device and the board, so today, I’ll only report my experience with the firmware. First Boot and First Impressions I’ve connected all necessary cables, and several USB devices include an harddrive and RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad. The device started automatically upon connecting the power, and on average the boot takes between 25 to 30 seconds. Not bad at all for an entry-level device. The launcher […]

January 27, 2016January 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Zappiti Player 4K Duo UHD Media Player Supports Two 3.5″ Hard Drives for Up to 16TB Video Storage

If you are the kind of person who mostly likes to watch online videos, Zappiti’s media players won’t have much to offer over cheaper alternatives, but if you have a large library of videos, either downloads or your own Blu-Ray rips, and would like to watch your movies both at home or on the go, Zappiti Player 4K Duo media player may fulfill your needs thanks to its two 3.5″ SATA bays providing up to 16TB storage, and a RealTek RTD1195 dual core processor supporting 1080p60 and 4K30 video playback. Zappiti Player 4K Duo specifications: SoC – Realtek RTD1195 dual core ARM Cortex A7 processor @ 1.1 GHz with Mali-400MP2 GPU System Memory – N/A Storage 5 GB internal memory (I assume available space out of a 8GB NAND flash) 2x SATA Bay with 3.5″ hard drive up to 8TB each formatted with FAT16/FAT32, EXT2/EXT3, NTFS, or Mac OS enhanced […]

January 19, 2016January 26, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Ugoos UT4 Android 5.1 TV Box Review

Ugoos UT4 is one of many Rockchip RK3368 TV boxes available on the market today, but it’s one of the model with higher-end specifications including 2 GB RAM, and 16 GB flash, as well as Gigabit Ethernet and 802.11ac WiFi, Ugoos offers regular firmware updates for their devices, and as I found out in Ugoos UT4 specs and teardown post, the mini PC features a fan to keep the device cool at all times. Today, I’ll focus on reviewing the firmware including video playback capabilities, performance and whether advertised features work as they should. First Boot, Settings and First Impressions Before powering on the device, I connected some cables (Ethernet, HDMI, optical audio, AV to speakers), and made use of all four USB ports with a USB hard drive, a webcam, a keyboard, and a USB hub with two RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart […]

January 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 49 Comments

MXQ 4K RK3229 Android TV Box Sells for $29.99 Shipped

This morning I wrote about Sunchip CX-R9 TV box based on Rorkchip RK3229 that is said to be selling for $32, as long as you buy 1,000 pieces, but the new Rockchip SoC might truly disrupt the low-end market, as MXQ 4K RK3299 TV box has just launched on GeekBuying where it is sold for only $29.99 shipped. MXQ-4K specifications: SoC – Rockchip RK3229 quad core ARM Cortex A7 processor @ 1.5 GHz with ARM Mali-400MP2 System Memory – 1GB DDR3 Storage – 8GB NAND flash + SD card slot up to 32GB Video Output – HDMI 2.0 up to 4K2K @ 60 fps, and 3.5mm AV output (composite) Audio Output – HDMI, AV, and coaxial S/PDIF Connectivity – 100Mbps Ethernet, 802.11 b/g/n WiFi USB – 4x USB 2.0 host ports Power Supply – 5V/2A Dimensions – N/A The device runs Android 4.4 with Kodi 16, and the specs list […]

January 4, 2016January 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Faster H.265/HEVC Video Encoding with Nvidia GTX960 GPU and ffmpeg

H.265 promises the same video quality as H.264 when using half the bitrate, so you may have thought about converting your H.264 videos to H.265/HEVC in order to reduce the space used by your videos. However, if you’ve ever tried to transcoding videos with tools such as HandBrake, you’ll know the process can be painfully slow, and a single movie may take several hours even with a machine with a power processor. However, there’s a better and fster solution thanks to hardware accelerated encoding available in some Intel and Nvidia graphics cards. For this purpose, GearBest sent me Maxsun MS-GTX960 graphics card, a second generation Maxwell GPU, that supports H.265 accelerated video encoding and promised up to 500 fps video encoding. So I’ve put the graphics card to the test in a computer running Ubuntu 14.04, and reports some of my findings here. Similar instructions can also be followed in […]

December 26, 2015March 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Dune HD Solo 4K is a High-End Media Player with a SATA Bay, a DVB-T2 Tuner, and Sigma Designs SMP8758 Processor

Dune HD, a company specializing in “high-performance digital media players”, has just unveiled Dune HD Solo 4K media player based on Sigma Designs SMP8758 dual core Cortex A9 processor, supporting 10-bit HEVC video decoding up to 2160p @ 30 fps, HD audio pass-though, and including a SATA tray. Dune HD Solo 4K specifications: SoC – Sigma Designs SMP8758 dual core Cortex A9 processor @ 1.2 GHz with an ARM Mali-400 GPU and VXP image processing engine System Memory – 1GB Storage – 4GB flash for firmware, internal HDD rack with hot swap function for a 2.5″ SATA drive, SD card reader (TBC) Video Output – HDMI 1.4b up to 1080p60 and 4K @ 30 Hz (including 23.976, 25, 29.97, 50, 59.94Hz refresh rates), and composite video Audio Output – HDMI, analog stereo audio, coaxial S/PDIF (shared via AV port). 24-bit /192 KHz audio support Video codecs – MPEG2, MPEG4, XVID, […]

December 2, 2015May 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Xiaomi Mi 3 TV Box Board’s Pictures Reveal Amlogic S905-H Processor

Xiaomi unveiled Mi 3 TV box based on Amlogic S905 processor a while ago, but since we’ve got so many Amlogic S905 boxes on the market, and the interface is only in Chinese, I did not find it that interesting. But somebody did a teardown of the device, and sent me some good pictures revealing that the device uses Amlogic S905-H with DTS and Dolby licenses paid for and enabled. So that means just like for Amlogic S812, where there’s a S812-H with Dolby and DTS, there are two versions for Amlogic S905. I understand the silicon might be the same, but the SDK will differ (TBC). Other main components include a 4GB Toshiba THGBMBG5D1KBAIT eMMC 5.0 flash, two NANYA NT5CB256M16DP-EK 512MB DDR3 chips (1GB in total), a Broadcom wireless chipset (BCM4345) for 802.11ac Wifi and Bluetooth 4.1, and Ricoh RN5T567A PMIC. There are few connectors as on other Xiaomi […]