hdmi News - Page 9 of 23 - CNX Software

October 9, 2022October 26, 2022 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

$10 HDMI to USB 3.2 video acquisition board is based on MS2130 chip

We’ve just written about an open-source hardware Allwinner V851S camera board from YuzukiHD, but he/she has made another interesting board with the YuzukiLOHCC PRO HDMI to USB 3.2 video acquisition board based on MacroSilicon MS2130 HDMI to USB chip, as well as MS9332 one-to-two active splitter, and MS8003/MS8005 microcontroller. YuzukiLOHCC PRO stands for Yuzuki Loop Out HDMI Capture Card PRO, and there are two HDMI ports, one for input and one for output, as well as a USB Type-C port to connect to the host and capture the video input. YuzukiLOHCC PRO key features and specifications: Main chip – MacroSilicon/UltraSemi MS2130 USB 3.2 Gen 1 high-definition video and audio acquisition chip MCU – MacroSilicon MS8005/MS8003 8051-core MCU Splitter – MacroSilicon MS9332 one-to-two active splitter Video Input – HDMI up to 4Kp30 or 1080p60 Video Output – HDMI 2.0 YCbCr420 4Kp60 loop out, 10/12/16-bit deep color, adaptive input equalization, pre-programmed HDCP […]

August 22, 2022August 25, 2022 by Sponsored Post - No Comments

ProScreenCast SC02 is a 4K wireless HDMI transmitter & receiver kit (Sponsored)

ProScreenCast SC02 is a kit that can add wireless HDMI to any hardware with HDMI output thanks to a transmitter & a receiver capable of up to 4K resolution at 30 Hz with a range of up to 50 meters. A typical way of connecting a device to a display or TV wirelessly is to use a 4K wireless display adapter such as the ProScreenCast SC01 connected to the HDMI (or VGA) input port of the screen, but that only works with AirPlay or Miracast capable host devices. That’s where the ProScreenCast SC02 becomes useful as it can work with any device with HDMI output and it does not matter whether it supports AirPlay or Miracast. ProScreenCast SC02 specifications: SC02 receiver Video Output – HDMI 1.4 up to 4Kp30 and VGA Audio Output – 3.5mm aux port Wireless Dual-Band 802.11 a/b/g/n/ac WiFi 5 Supports up to 8x TX01 transmitters Dual […]

August 9, 2022August 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

ACTAMID M8S – An Intel Pentium N6005 palm-sized PC with dual Gigabit Ethernet, 3x HDMI ports (Crowdfunding)

ACTAMID M8S is a palm-sized 3.4-inch mini PC powered by an Intel Pentium N6005 Jasper Lake processor with up to 16GB LPDDR4 memory, 1TB M.2 2242 SSD. The M8S is bigger than the recently announced 2.7-inch PIX NII mini PC based on the same processor, but that’s for a good reason since it offers more ports with three HDMI outputs, dual Gigabit Ethernet, and three USB 3.0 ports. The mini PC also features WiFi 6 and Bluetooth 5.2 wireless connectivity, a quiet fan, and a 7-color LED backlight for good effects… Win Element Technology Co., Ltd, the Hong Kong company owning the ACTAMID brand, says the mini PC ships preinstalled with an activated version of Windows 11, but also supports Linux distributions such as Ubuntu 20.04. ACTAMID M8S specifications: SoC – Intel Pentium N6005 quad-core processor @ 2.0GHz / 3.3GHz (Turbo) with Intel UHD graphics @ up to 900 MHz; […]

August 2, 2022August 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Transpeed P10 Android 10 Full HD projector features Allwinner H700 SoC

Transpeed P10 Full HD Android 10 projector

Allwinner H700 is a “new” processor that has found its way into Transpeed P10 Full HD “portable” projector running Android 10. It is sold on Aliexpress for $125 including shipping. Allwinner H700 happens to be yet another derivative of Allwinner H616/H618 quad-core Corex-A53 processor, but adds an RGB LCD interface up to 1080p60 and video input interfaces that make it suitable for projector and smart displays. The processor also has two Ethernet interfaces (1x Gigabit and 1x 10/100M) like the H616, but no built-in PHY, so an additional Ethernet transceiver is needed on the board. Let’s first have a look a the Transpeed P10 projector specifications: SoC – Allwinner H700 quad-core Arm Cortex-A53 processor @ 1.5GHz with Arm Mali-G31 mp2, 6K video decoder, and 4Kp25 H.264 video encoder System Memory – 2GB RAM Storage – 16GB eMMC flash Projector 1920×1080 native resolution LED bulb Brightness – 120 ANSI Lumens Projection […]

July 25, 2022July 25, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Compact3566 – A Rockchip RK3566 SBC that closely follows Raspberry Pi 3 form factor

We’ve very recently written about Geniatech XPI-3566 SBC powered by Rockchip RK3566 CPU that somewhat follows the Raspberry Pi 3 Model B form factor. Boardcon Compact3566 offers similar features, but it appears to keep exactly the same port assignment as the Raspberry Pi SBC, so it should be compatible with more accessories. The Compact3566 SBC ships with up to 8GB LPDDR4 and 128GB eMMC flash, features Gigabit Ethernet & WiFi 5, four USB 3.0/2.0 ports, HDMI 2.0 output, MIPI DSI and CSI interfaces, the 40-pin GPIO header, as well as extra built-in features such as an M.2 socket for storage, RTC with battery, and a built-in microphone. Compact3566 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 @ up to 1.8 GHz with ARM Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS NPU System Memory – 2GB, 4GB, or 8GB LPDDR4/LPDDR4X Storage 8GB, 16GB, […]

July 20, 2022February 25, 2023 by Jean-Luc Aufranc (CNXSoft) - 70 Comments

Rock 5B RK3588 SBC preview – What works, what doesn’t in Debian 11

I’ve recently received an early sample of Radxa ROCK5 Model B (aka ROCK 5B) SBC part of the “Developer Edition” batch with 16GB RAM, and already showed the hardware and it booting successfully in Debian 11.

I’ve now spent more time with the board, and as part of the “debug party” tested performance and features in Debian 11. As one would expect, some things work fine, providing excellent performance, but others still need improvements.

July 12, 2022July 15, 2022 by Sponsored Post - 12 Comments

4K wireless display adapter supports 3840×2160 resolution @ 60 Hz, HDR (Sponsored)

ProScreenCast SC01 is a 4K wireless display adapter supporting 3840×2160 resolution at up to 60 Hz with High-Dynamic Range (HDR) support. The HDMI 2.0 adapter is compatible with Miracast, Airplay, and DLNA streaming standards, and can sustain the required bandwidth needed thanks to dual-band WiFi 5 connectivity. We started to see plenty of Miracast and DLNA capable wireless adapters about 8 years ago, but there were all limited to WiFi 4 and either 720p or 1080p resolutions, so the ProScreenCast SC01 wireless adapter offers a greatly improved video quality and user experience with faster WiFi, and 4K HDR support. SC01 specifications: Video Output – HDMI 2.0 up to 4Kp60 with HDR support Wireless – Dual-band WiFi 5 (802.11ac) Support standards – Airplay, Miracast, and DLNA Power Supply – 5V/1A or 2A via USB Type-C port Dimensions – 72 x 72 x 17 mm Weight – 50.7 grams Materials – ABS+PC […]

May 3, 2022May 4, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

NVISEN FU01 is a fanless Tiger Lake mini PC with a Thunderbolt 4 port

NVISEN FU01 fanless mini PC is offered with a choice of Intel Core i3/i5/i7 Tiger Lake processors, fitted with up to 16GB RAM (upgradeable to 64GB), a 256GB or 512GB M.2 NVMe SSD, and the highlight of the computer is its 40Gbps Thunderbolt 4 port with 8K video output support. The Tiger Lake system can drive up to three 4K displays with HDMI 2.0 and DisplayPort connectors adding to the Thunderbolt 4 port, offers Gigabit Ethernet and WiFi 5 connectivity, plus six USB 3.0/2.0 Type-A ports for expansion. NVISEN FU01 specifications: SoC (one or the other) Intel Core i3-1115G4 dual-core processor @ 3.0GHz, up to 4.1GHz (Turbo) with Intel UHD graphics; 28W TDP Intel Core i5-1135G7 quad-core processor @ 2.4GHz, up to 4.2GHz (Turbo) with Intel Xe graphics; 28W TDP Intel Core i7-1165G7 quad-core processor @ 2.8GHz, up to 4.7GHz (Turbo) with Intel Xe graphics; 28W TDP System Memory & […]