CZUR ET24 Pro book scanner review with Ubuntu 22.04 Linux

CZUR ET24 Pro book scanner Ubuntu review

The CZUR ET24 Pro is a professional book scanner that works with Windows, macOS, and Linux, so I decided to review it in Ubuntu 22.04 since we are fans of hardware that can interface with Linux at CNX Software.

If you haven’t already, I strongly recommended reading the unboxing part of the CZUR ET24 Pro review, as we go through the specifications, show the various interfaces of the scanner, showcase the various accessories, and also try it out with the HDMI interface in presentation/preview mode. It will help you better understand the second part of the review, where we’ll connect the CZUR ET24 Pro scanner to a Ubuntu 22.04 laptop using the provided USB cable.

Banana Pi BPI-KVM – A KVM over IP solution based on Rockchip RK3568 SoC

Banana Pi BPI-KVM

Banana Pi has started working on the BPI-KVM box based on a Rockchip RK3568 SoC, but it’s not a mini PC, and instead, it is a KVM over IP solution designed to remotely control another computer or device as if you were on-site with, for example, the ability to turn on and off the connected device, access the BIOS, and so on. Commercial KVM over IP solutions used to be expensive, but people have started to use Raspberry Pi SBCs with an expansion board such as the PiKVM v3, and more recently Raspberry Pi CM4-based KVM over IP solutions have been launched for under well $200. Seeing the popularity of these solutions, Banana Pi has decided to join the fray with its own BPI-KVM powered by an IO-rich Rockchip RK3568 processor that provides all interfaces needed for this type of application. Banana Pi BPI-KVM (preliminary) specifications: SoC – Rockchip RK3568 […]

CZUR ET24 Pro book scanner review – Part 1: Specs, unboxing, and first try

CZUR ET24 Pro book scanner HDMI mode TV

CZUR ET24 Pro is a professional book scanner with 320DPI optional resolution (delivering up to 24MP images) that works with Windows, macOS, and Linux via a USB port, or even in standalone mode through an HDMI port that could be used for business presentations. When CZUR contacted me about reviewing a scanner, I was not sure it would be interesting, but then I was intrigued because it looks like a bedside light and I had never used this type of scanner.  So I decided to give a go, and here I am with a review sample. It looks like it should be especially useful for people scanning a lot of documents or books as it’s designed for speed and should significantly improve productivity over a traditional scanner with a cover, while hopefully keeping the quality. But we’ll check that in the full review. CZUR ET24 Pro specifications Optical resolution – […]

Link Pi ENC5 v2 video encoder supports up to 5 4Kp30 HDMI inputs

Link Pi ENC5 v2

The Link Pi ENC5 v2 is a video encoder with five HDMI inputs up to 4Kp30, one HDMI output, two audio jacks, Gigabit Ethernet, and a USB 3.0 port that supports RTSP, ONVIF, SRT, and NDI streaming protocols. The system appears to be based on the Hisilicon Hi3531DV200 quad-core Cortex-A53 processor and features 8GB eMMC flash for the OS, plus 4GB RAM. The USB port can be used to record videos to an external hard drive or flash drive or add WiFi or 4G/5G cellular connectivity. Link Pi ENC5 v2 specifications: SoC – Unnamed, but some of the specs are matching the Hisilicon Hi3531DV200 SoC CPU – Arm Cortex A53 quad-core processor @ 1.2GHz with 32KB l-Cache, 32KB D-Cache VPU Decode – H264, H264, MJPEG Encode – Up to 4Kp30 / 1080p60 H.264 Main/Baseline/High/ profiles, H.265 Main profile, MJPEG/JPEG Max Bitrate – 20Mbps Bit rate control – CBR, VBR, AVBR, […]

eEver EJ523D chip enables 4Kp60 video capture or streaming over USB 3.2

eEver EJ523D 4Kp60 HDMI USB video capture

eEver Technology, a subsidiary of eTron Technology, has launched the EJ523D 4Kp60 audio and video capture and streaming processor with a USB 3.2 interface, along with a reference platform currently showcased at COMPUTEX 2023. Over the last few years, we’ve covered some low-cost HDMI to USB 2.0 dongles that capture video up to 1080p30, followed by HDMI to USB 3.0 dongles handling up to 4Kp30, but the latest eEver EJ523D chip will be found in USB 3.2 adapters to capture at up to 4Kp60 resolution with H.265 encoding or 4Kp30 in the NV12 format. Some highlights of the EJ523D: Video capture resolution and frame rate 4K@ 30 fps or 2K @ 120 fps with NV12 4K @ 60 fps with H.265 10-bit HDR/H.264 encoding MJPEG encoding is also supported up to 4K @ 60 fps Integrated scaler – Full range up & down De-interlacing – De-interlace i to p mode […]

Ultrawide 8.8-inch HDMI and USB information display is offered with optional touchscreen support

8.8-inch information display HDMI USB touchscreen

Last year, I wrote about the Turing Smart Screen low-cost 3.5-inch display based on a WCH CH552T 8-bit E8051 core microcontroller that connects to a PC or other device through a USB Type-C cable in order to display system or other information using AIDA64 software or an open-source Python software. I’ve just come across another display that appears to serve the same purpose, except the “GeekTeches V35” is an ultrawide 8.8-inch display with 1920×480 resolution, micro USB and micro HDMI interfaces, and optional support for a touchscreen. GeekTeches V35 specifications: Display 8.8-inch IPS display with 480×1920 resolution (21:9 aspect ratio) with optional touch screen Pixel size –  0.114  x 0.114 mm Display area – 54.72 x 218.88 mm Wide display angle Brightness – 550cd/m2, adjustable Driver: IC/LCM Driver IC Display interface – “MIPI BIT interface”. Not sure what this is… a typo for MIPI DSI? Backlight current – 160ma Backlight […]

HIGOLE PC STICK (J4125+WiFi 6) review – Part 1: Specs, unboxing, teardown, and first boot

HIGOLE PC STICK Review

HIGOLE PC STICK is a mini PC that looks like a large flash drive, is smaller than a regular mini PC, and is easier to carry around. You can connect it directly to a monitor or TV with an HDMI input, and use it like any computer right away. In part 1 of the HIGOLE PC STICK review, we will go through the specifications, unbox the design, check its hardware design with a teardown, and go through the first boot. HIGOLE PC STICK specifications The HIGOLE PC STICK is powered by an Intel Celeron J4125 quad-core Gemini Lake Refresh processor with 8GB RAM, 128GB flash, and microSD card slot for storage expansion. The mini PC comes with a Gigabit Ethernet port, WiFi 6 & Bluetooth 5.2 connectivity, and supports two independent displays through the HDMI 2.0 port and USB Type-C port. The device also includes two USB 3.0 ports, one […]

$15 Adafruit Feather RP2040 with DVI Output Port connects to your HDMI TV or monitor

Adafruit Feather RP2040 DVI port

“Adafruit Feather RP2040 with DVI Output Port” is another Raspberry Pi RP2040 board with an HDMI port that can output DVI video signal (no audio) to most TVs or monitors with an HDMI input port thanks to the PicoDVI project. The board builds upon the company’s Adafruit Feather RP2040 with the HDMI port adding just a few dollars. Adafruit Feather RP2040 with DVI Output Port specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex M0+ microcontroller ~125 MHz (but it should be overclocked for DVI output) with 264 KB RAM Storage – 8MB SPI flash Video Output – 1x HDMI port for DVI output up to 320×240 or 400×240 resolution with 16-bit pixels, I2C signals to read EDID data, plus CEC and Utility pads broken out USB – 1x USB Type-C port I/Os Adafruit Feather compatible headers Up to 21x GPIOs 2x I2C, 2x SPI, 2x UART 4x 12-bit ADC […]

Exit mobile version
EmbeddedTS embedded systems design