hdmi News - Page 4 of 22 - CNX Software

May 30, 2024May 29, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ochin V2 tiny Raspberry Pi CM4 robotics carrier board gets micro HDMI port, Fast Ethernet support

Ochin V2 CM4 robotics carrier board and USB-C board

Ochin V2 is an update to the tiny Ochin Raspberry Pi CM4 carrier board for robotics applications and drones that adds a micro HDMI port, support for Fast Ethernet through pads or a GHS connector (no RJ45 connector), two user LEDs, and a few other changes. The form factor remains the same at just 55 x 40 x 4.7mm, or about the size of a Raspberry Pi Compute Module 4, which in combination with a range of USB, UART, I2C, and SPI interfaces, makes it an ideal candidate for space-constrained applications such as robotics system or UAVs. Ochin V2 specifications (differences against Ochin v1 shown in bold or strikethrough): Supported modules – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Cortex-A72 processor, up to 8GB RAM, up to 32GB eMMC flash (the CM4 Lite is not supported since there’s no microSD card on the board), 4Kp60 H.265 decode, 1080p30 H.264 encode, […]

May 13, 2024May 14, 2024 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Convert your tablet or smartphone into a touchscreen display for your PC, motherboard, etc… with the AURGA Viewer

The AURGA viewer is an HDMI and USB dongle with WiFi and Bluetooth connectivity that plugs into any system with HDMI output and can convert any smartphone, tablet, or laptop with a touchscreen display into a KVM solution by sending video data, as well as keyboard and mouse events wirelessly. We’ve recently written about Openterface Mini-KVM KVM-over-USB device that allows users to use their laptop to control another device with HDMI output locally without any additional display, keyboard, and mouse. But I’ve just been informed the AURGA Viewer, launched in 2022 on Kickstarter, can do something similar wirelessly. AURGA Viewer specifications and features: SoC – Allwinner S3 Cortex-A7 processor with 128MB DDR3 HDMI input – Male HDMI port with Toshiba TC35874x HDMI to MIPI CSI-2 bridge internally (See comments section); Works with VGA, mini HDMI, micro HDMI, etc… using adapters Wireless – Broadcom BCM4345C5 SDIO 802.11AC WiFi 5 and Bluetooth […]

May 8, 2024May 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$23 C790 HDMI to MIPI CSI adapter adds HDMI and audio input to Raspberry Pi SBCs

C790 is an HDMI to MIPI CSI-2 board compatible with Raspberry Pi single board computers featuring a 40-pin GPIO header that adds both HDMI input up to 1080p60 and I2S audio input to the popular Arm SBC. The solution can be useful for IP KVM solutions as we’ve seen with the PiKVM v3 and PiCast portable KVM switch, or to capture video and audio from a camera that outputs HDMI with audio through the board’s MIPI CSI camera interface and I2S input signals on the GPIO header. C790 specifications: Supported SBC’s – Raspberry Pi Zero, 3B, 3B+, 4B, CM3, CM4 with MIPI CSI-2 input port (Note: Raspberry Pi 4 is limited to 1080p50 due to 2-lane MIPI CSI-2, CM4 supports 1080p60) Main chip – Toshiba TC358743XBG HDMI to CSI-2 bridge chip up to 1920×1080, 60 FPS Video and audio input – HDMI port up to 1080p60 Video Output – 2-lane […]

March 25, 2024March 25, 2024 by Debashis Das - 3 Comments

Olimex VGA2HDMI is an open hardware board for VGA to HDMI conversion

Olimex VGA2HDMI is an open-source hardware VGA-to-HDMI converter specially designed and tested to work with the CERBERUS 2100, AgonLight 2, and Agon Origins boards. The board has a VGA port as input and an HDMI port as output and a USB-C port is there to provide the external power required for the board. In one of our previous posts, we wrote about the NovaVGA Shield, which adds VGA output to your Arduino UNO. Now, with the help of this board, that capability can be extended to HDMI. There are also extenders that carry VGA signals over Ethernet cables, a topic we have covered in another post. With this new board, you can convert that VGA signal to HDMI. It’s not like there aren’t other VGA to HDMI converters on the market; a quick Amazon search gave me the VENTION VGA to HDMI Adapter, but among them, most were HDMI to […]

March 7, 2024April 24, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

RealTek RTD1325 SoC shows up in Formuler Z mini 4K Android 12 dongle

Formuler Z mini is a 4K Android 12 TV dongle powered by the new RealTek RTD1325 SoC with a Mali-G57 MC1, 4K AV1 video processing unit, and support for features such as Quick Media Switching (QMS) from the HDMI 2.1 specifications. The Android TV dongle also comes with 2GB LPDDR4 memory, 8GB eMMC flash, an HDMI 2.1 port up to 4K resolution, WiFi 5 and Bluetooth 5.0 connectivity, Widevine L1 DRM, and a Bluetooth voice remote control. Formuler Z mini specifications: SoC – RealTek RTD1325 CPU – Quad-core Arm Cortex-A55 @ 1.7GHz with 512KB L3 cache [Updated on April 24, 2024 – See comments section] GPU – Arm Mali-G57 MC1 VPU – 4Kp60 10-bit AV1 video decoder System Memory – 2GB LPDDR4 @ 2400MHz Storage – 8GB eMMC flash Video Output – HDMI 2.1 up to 4K resolution (3840 x 2160) with 4K HDR (HDR10+, HLG), QMS support Networking – […]

February 29, 2024March 15, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MINIX Z100-AERO is an Intel N100 mini PC with triple 4K display support, dual Ethernet

The MINIX Z100-AERO is an actively-cooled Intel Processor N100 mini PC with a form factor similar to the company’s Z100-0dB fanless mini PC but offered with a different choice of interfaces including dual Ethernet (1Gbps + 2.5 Gbps), and three video outputs through HDMI 2.1, DisplayPort, and USB-C connectors. The mini PC supports up to 32GB DDR4 memory via a single SO-DIMM slot and M.2 NVMe SSD storage, and features four USB 3.2 Gen 1 ports (5Gbps), plus one full-featured USB-C 3.2 port, and a 3.5mm headphone jack. MINIX Z100-AERO specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – 4GB, 8GB, or 16GB DDDR4-3200 via 1x SO-DIMM socket, upgradable to 32GB Storage 128GB, 256GB, or 512GB M.2 SSD (PCIe Gen3 x1?), upgradable up to 4TB MicroSD card slot […]

February 18, 2024March 2, 2024 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Beelink SEi12 i7-12650H mini PC review – Part 2: Windows 11 Pro

Beelink SEi12 i7-12650H mini PC review Windows 11 Pro

We’ve already listed the specs and done an unboxing and teardown for the Beelink SEi12 i7-12650H Mini PC powered by a 10-core Intel Core i7-12650H processor with 32GB DDR4 and a 500GB M.2 SSD preloaded with Windows 11 Pro. In the second part of the review, we will test the Beelink SEi12 i7-12650H with the Windows 11 Pro operating system in detail with a software overview and feature testing, benchmarks, networking and storage testing, thermal efficiency, fan noise, and power consumption. Since we also reviewed the GEEKOM Mini IT12 with the same processor last month, we’ll try to compare both in this review and list the pros and cons for each system. Software overview and features testing The System->About menu confirms that we have a “SEi” Mini PC powered by a 12th Gen 1.5 GHz (base frequency) Intel Core i7-12650H processor and 32GB of RAM, running Windows 11 Pro operating […]

February 14, 2024February 14, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Flipper Zero gets a Raspberry Pi RP2040-powered video game module

Flipper Zero hardware & wireless hacking tool can now be used as a proper game console thanks to a Raspberry Pi RP2040-powered video game module that mirrors the display of the device on a larger monitor or TV via DVI/HDMI video output, and also adds a 6-axis motion tracking sensor. The Flipper Zero has been in the news in recent days, notably with Canada’s government banning the device due to car theft (although it only seems feasible on older cars), and today the company has announced the launch of a video game module developed in collaboration with Raspberry Pi Ltd. Video game module specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex-M0+ microcontroller clocked up to 133 MHz with 264 kB SRAM Video Output – DVI-D at 640х480 with 60 Hz refresh rate. It also supports HDMI. USB – USB Type-C port connected to the microcontroller. Acts as a USB device […]