hdmi News - Page 15 of 23 - CNX Software

March 17, 2017March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$18.9 Orange Pi Zero Plus 2 Board: Allwinner H3, WiFi + Bluetooth LE, HDMI and 8GB eMMC Flash

When will they ever stop? Shenzhen Xunlong has launched yet another Allwinner H3 board called Orange Pi Zero Plus 2, that has not that much in common with Orange Pi Zero, since it uses a different processor (H3 vs H2+), adds HDMI, and implements WiFi and BLE via an Ampak AP6212 module.Orange Pi Zero Plus 2: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI port with CEC support Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212) with u.FL antenna connector and external antenna USB – 1x micro USB OTG port Camera – MIPI CSI port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and […]

February 3, 2017February 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Targus Universal DisplayLink Docking Stations Support Up to Six 4K Monitors via a Single USB Cable

USB type C connectors are becoming more and more common and beside transmitting data and power, some devices also support video over USB which requires a dock, and if you have some serious display requirements, Targus docking stations over USB-C or USB 3.0 might be what you are looking for, as they support two 4K monitors at the same time thanks to their multiple HDMI 2.0, DisplayPort 1.2a and DVI outputs, and you can even daisy-chain three docking stations over USB 3.0 type A cables in order to control six 4K monitors from one USB port. Targus has several models, but let’s check out the specifications of their “USB 3.0 DV4K DOCK160USZ dock station” pictured above: Chipset – DisplayLink DL-6950 Video Output Ports – 2x HDMI 2.0 ports, 2x DisplayPort 1.2a ports supporting up to dual 4K Ultra HD video @ 4096×2160 60Hz 24 bpp Audio – 1x 3.5 mm […]

January 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

HDMI 2.1 Specification to Add Support for 4K @ 120 Hz, 8K and 10K Resolutions. New 48G Cable Required.

The HDMI Forum has just announced they’ve been working on HDMI specification Version 2.1 adding new video resolutions and refresh rates including 8K60 and 4K120, as well as dynamic HDR, and increased bandwidth up to 48 Gbps for uncompressed 8K videos with HDR. The new specification also includes support for eARC (enhanced audio return channel) with support for advanced audio formats such as object-based audio, and advanced audio signal control capabilities including device auto-detect. Game Mode VRR is another new feature from HDMI 2.1 with variable refresh rate to enable a 3D GPU to display the image at the moment it is rendered in order to reduce lag and frame tearing. Beside 4K120 and 8K60, the new specification also handles 4K, 5K, 8K, and even 10K resolutions at various frame rates between 50Hz to 120 Hz, up to 10K @ 120 Hz. Higher resolutions and frame rates (>=4K @ 120Hz; […]

December 24, 2016March 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Eweat R9 Plus TV Box Review Part 2 – Android, OpenWrt, and HDMI Recording

Eweat R9 Plus is a device powered by Realtek RTD1295 SoC combining main functions: Android 6.0 TV box, OpenWrt NAS/router, and HDMI recorder thanks to its HDMI input port. It competes directly with Zidoo X9S which has the same features, except while Zidoo X9S has no internal SATA bay and your 2.5″ hard drive just hang outside the box, Eweat R9 Plus comes with an internal 3.5″ SATA bay that makes it much neater on your furniture… We’ve already seen that in the first part for review “Eweat R9 Plus unboxing and teardown“, and I was impressed by the hardware, but the software is even more important, and that’s what I’m going to check out in the second and final part of this review. First Boot, First Impressions and Setup. I’ve first inserted a 1TB 3.5″ SATA drive in the device, and then I connected an extra USB 3.0 hard […]

December 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Full Specifications for Intel Apollo Lake NUC Mini PC’s NUC6CAYB Board Released

Intel unveiled Intel NUC6CAYS & NUC6CAYH NUCs to be powered by Intel Celeron “Apollo Lake” Jxxx processors, but at the time we did not have the full technical specifications. The company has now published a 66-page technical product specification for NUC6CAYB board used in both mini PCs. Intel NUC Board NUC6CAYB specifications: SoC – Intel Celeron J3455 quad core processor @ 1.5 GHz to 2.3 GHz (burst) with 12EU Intel HD graphics 500 @ 250 to 700 MHz supporting DirectX 9.3/10/11.1/12, OpenCL 1.2, OGLES 3.0, OpenGL 4.3 (10W TDP) System Memory – 2x DDR3L-1600/1833 SO-DIMM supporting up to 8GB DDR3L-1866 in total Storage – 32GB eMMC flash (Sandisk, Hynix or Samsung depending on your luck), 2.5″ SATA3 bay for hard drives up to 9.5mm thick, SDXC slot with UHS-I support Video Output – HDMI 2.0 (4K @ 60 Hz) with HDMI CEC via MegaChips MCDP2800-BCT DisplayPort 1.2a to HDMI 2.0 […]

October 28, 2016October 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

NanoPi S2 Quad Core ARM Linux Board Comes with WiFi & BT Connectivity, HDMI, LVDS, and LCD Interfaces

FriendlyARM has released a bunch of Allwinner based NanoPi Allwinner boards recently, but they also have some Samsung/Nexcell S5P ARM Cortex A9 boards in their portfolio, and the latest is NanoPi S2 with Samsung S5P4418 quad core processor, three display interfaces, a camera interface, wireless connectivity through WiFi and Bluetooth 4.0, a 40-pin “Raspberry Pi” header, and more. NanoPi S2 specifications: SoC – Samsung/Nexcell S5P4418 quad core Cortex A9 processor @ 400 MHz to 1.4 GHz with Mali-400MP GPU System Memory – 1 GB DDR3 Storage – 8GB eMMC flash + micro SD slot Video Output / Display I/F – micro HDMI port up to 1080p60, 24-pin LCD RGB interface, 24-pin LVDS interface Audio – 3.5mm audio jack, micro HDMI Camera – 24-pin DVP camera interface Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 classic & LE (AP6212 module); IPEX/u.FL antenna connector USB – 1x USB 2.0 Host, 1x micro […]

October 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Zidoo X8 Android TV Box, OpenWrt NAS, and HDMI Recorder Sells for $109

I posted my review of Zidoo X9S Android TV box, HDMI recorder and OpenWrt NAS a few days ago, and despite some limitations with regards to 4K video playback, the device is working pretty well. The $140 price tag might be a little more than some people are ready to pay, and the good news is that the company has now launched a cheaper model based on the same processor called Zidoo X8, without the external SATA port, and less storage. Zidoo X8 specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor @ 1.4 GHz with ARM Mali-T820 MP3 GPU System Memory – 2 GB DDR3 Storage – 8 GB eMMC flash + micro SD slot + SATA 3.0 interface Video I/O – HDMI 2.0a output, AV output and HDMI 2.0 input (Support up to 4K60 input, but record/stream up to 1080p @ 30 Hz) Audio I/O – HDMI […]

October 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Zidoo X9S Android TV Box HDMI Input Testing – Video Recording, PiP, and UDP Broadcasting

One of Zidoo X9S media center‘s key features is its HDMI Input port with support for PVR, picture-in-picture, and video broadcasting over UDP. The company has come a long way since the implementation of HDMI input on Zidoo X9 TV box, which would only support PVR function, and exclusively work in the foreground. For this review, I connected K1 Plus T2 S2 Android TV box to the HDMI input of Zidoo X9S, and started HDMI In app.The first good news is that HDMI input does work, as we can see K1 Plus user interface preview inside Zidoo X9S’ HDMI IN app. Before testing all features, let’s go through the options for Video, Audio, and Output. You can select various video resolution up to 1080p, but I left it to Auto, which for this test meant 1080p. Framerate cannot be changed and is set to Auto, while bitrate ranges from 1M […]