hardkernel News - Page 6 of 14 - CNX Software

July 16, 2020November 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

ODROID-N2 Plus SBC Gets Amlogic S922X Rev. C Processor Clocked at up to 2.4 GHz

Announced in February 2019, ODROID-N2 Amlogic S922X SBC launched the following month with 2GB to 4GB RAM, HDMI 2.0 output, Gigabit Ethernet, multiple USB 3.0 ports with pricing starting at $63 making very good value for an hexa-core Cortex-A73/A53 processor. The company has now announced an upgraded with ODROID-N2 Plus SBC featuring Amlogic S922X Rev.C bringing the Cortex-A73 big core maximum clock frequency from 1.8 GHz to 2.2GHz. But Hardkernel also found out they could overclock the processor up to 2.4 GHz in all 300 boards they have delivered a 33% boost over the original ODROID-N2 board. The Cortex-A53 cores are also a bit faster up to 2.0 GHz. ODROID-N2+ specifications: SoC – Amlogic S922X Rev.C hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 2.2/2.4GHz, 2x Arm Cortex A53 cores @ 2.0GHz, Arm Mali-G52 GPU @ 846MHz; 12nm manufacturing process System Memory – 2GB or 4GB […]

June 18, 2020June 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

ODROID-H2+ SBC Gets Celeron J4115 Processor, Offers 2.5GbE Networking

Harkernel ODROID-H2 is an Intel Celeron J4105 Gemini Lake powered SBC that offers great value and performs reasonably well as we’ve seen in our ODROID-H2 Ubuntu review. But there’s an upgraded model coming soon with ODROID-H2+ getting a slightly faster Intel Celeron J4115 processor, 2.5 GbE networking, a couple of extra I/O on the header for USB 2.0 and HDMI CEC, and a change to the 12V SATA power circuit to improve the suspend-resume power control sequence of 3.5″ HDDs. ODROID-H2+ specifications: SoC – Intel Celeron J4115 Gemini Lake Refresh quad-core processor @ 1.8 GHz / 2.5 GHz (turbo single thread) / 2.3Ghz (turbo multi-thread) with 12EU Intel UHD Graphics 600 up to 700 MHz; Noted listed on Ark Intel just yet, but it’s real. System Memory – Dual-channel Memory DDR4-PC19200 (2400MT/s) supporting up to 32GB RAM in total Storage – M.2 PCIe 2.0 x4 slot for one NVMe storage, […]

May 3, 2020May 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

ODROID-Go Advance Black Edition Gets WiFi, R2/L2 Button, and USB-C Power Input

At the end of last year, Hardkernel launched ODROID-GO Advance portable Linux retro game console powered by a Rockchip RK3326 processor with 1GB RAM, and a 3.5″ color display. While it was fairly well-received, people wished it would not come with a large power barrel jack and included WiFi among a few other requests. COVID-19 also delayed mass-production of the device, but the silver lining is that the company decided to make a new revision 1.1 PCB with a USB-C port for power input, a WiFi module, and R2 and L2 buttons that’s planned to launch soon under the name ODROID-Go Advance Black Edition. ODROID-Go Advance Black Edition specifications: SoC – Rockchip RK3326 quad-core Arm Cortex-A35 processor @ 1.3GHz with Mali-G31 MP2 GPU System Memory – 1GB DDR3L @ 786Mhz, 32 Bits bus width Storage – 16MB SPI Flash for bootloader, Micro SD Card slot (UHS-1 Capable interface) Display – […]

April 24, 2020April 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

Raspberry Pi 4 vs ODROID-C4 Features Comparison

Yesterday, Hardkernel launched ODROID-C4 Amlogic S905X3 SBC as an update to ODROID-C2 SBC launched in 2016. We’ve seen the board can compete with Raspberry Pi 4 4GB board thanks to benchmarks released by Hardkernel, but since those boards are so versatile, meaning they can be used in a variety of applications, it’s impossible to benchmark all use cases. One way to find out which board might be right for your application without going through benchmarks is to look at a list of features for each, and that’s exactly what we’ve done in this post. Let’s get straight to the Raspberry Pi 4 (4GB RAM) vs ODROID-C4 comparison table. Features/Specs Raspberry Pi 4B (4GB) ODROID-C4 Release date 24th June 2019 23rd April 2020 SoC Broadcom BCM2711 quad-core Cortex-A72 @ 1.5 GHz (overclockable to 2.0+ GHz) with NEON, FPU Amlogic S905X3 quad-core Cortex-A55 processor @ 2.0 GHz with NEON, FPU, Armv8 Crypto […]

April 23, 2020April 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 107 Comments

$50 ODROID-C4 Raspberry Pi 4 Competitor Combines Amlogic S905X3 SoC with 4GB RAM

Hardkernel has just launched an update to its ODROID-C2 board, with ODROID-C4 SBC equipped with a 2.0 GHz Amlogic S905X3 quad-core Cortex-A55 processor combined with up to 4GB RAM, four USB 3.0 ports, Gigabit Ethernet, HDMI 2.0 video output, and the usual 40-pin I/O header. That makes it a worthy competitor to Raspberry Pi 4 with 4GB RAM, especially since it supports Ubuntu 20.04, CoreELEC, Android 9, and LineageOS operating systems, and comes with a proper heatsink for cooling for just $50 plus shipping. ODROID-C4 specifications: SoC – Amlogic S905X3 quad-core Cortex-A55 processor @ 2.0GHz with Arm Mali-G31MP2 GPU supporting OpenGL ES 3.2, Vulkan 1.0 and OpenCL 2.0 System Memory – 4GB DDR4 Storage 1x eMMC connector (8/16/32/64GB modules available) 1x Micro SD slot with support for DS/HS mode up to UHS-I SDR104 Video & Output – HDMI 2.0 port up to 4K@60Hz with HDR, CEC, EDID Audio – Digital […]

December 28, 2019 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

$55 ODROID-GO Advance Linux based Retro Game Console is Powered by Rockchip RK3326 Processor

Last year, Hardkernel took some time away from Arm and x86 Linux SBCs with the launch of ODROID-GO retro game console powered by Espressif Systems ESP32 processor. The console could be programmed with the Arduino IDE, and the $32 price tag made it a popular item despite the limited processing power fo the ESP32 dual-core processor. The good news is that the console got an upgrade with ODROID-Go Advance equipped with a Rockchip RK3326 quad-core Cortex-A35 processor coupled with 1GB RAM to run Linux, and featuring an upgraded 3.5″ wide-viewing angle color display. ODROID-GO Advance specifications: SoC – Rockchip RK3326 quad-core Arm Cortex-A35 processor @ 1.3GHz with Mali-G31 MP2 GPU System Memory – 1GB DDR3L @ 786Mhz, 32 Bits bus width Storage – 16MB SPI Flash for bootloader, Micro SD Card slot (UHS-1 Capable interface) Display – 3.5″ 320×480 TFT LCD (Wide-viewing angle display, MIPI-DSI interface) Audio – 3.5mm earphone […]

August 26, 2019August 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

ODROID-N2 CoreELEC Edition Media Center Launched for $65 and Up

ODROID-N2 is an Amlogic S922X single board computer with 2GB or 4GB RAM that’s fairly popular thanks to its great performance/price ratio, good cooling, and decent support from Hardkernel. Hardkernel have worked in collaboration with CoreELEC, and have just introduced ODROID-N2 CoreELEC Edition media center featuring the SBC. The company offers the media center at introductory prices of $65 for the 2GB RAM model, and $75 for the 4GB model with limited stocks at those discounted prices. ODROID-N2 CoreELEC Edition media center includes the following: ODROID-N2 SBC with either 2GB or 4GB RAM ODROID-N2 Case Black An 8GB Industrial MicroSD UHS-1 card pre-loaded with CoreELEC for ODROID-N2 preinstalled 12V/2A Power Supply (with chosen type of plug) CoreELEC Logo Sticker CoreELEC for ODROID-N2 supports 4K HDR10 and HLG high dynamic-range, Auto frame rate switching & dynamic range matching, DTS-HD & Dolby-HD audio pass-through including DTS:X and Dolby Atmos. The firmware is […]

July 14, 2019August 4, 2019 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

ODROID-H2 Review – Part 2: Ubuntu 19.04

After many months of delays due to Intel not mass-producing Gemini Lake processors, Hardkernel started selling ODROID-H2 again, more exactly ODROID-H2 Rev. B, and the end of last month, and the company sent me a full kit for evaluation. You can check out ODROID-H Rev. B with Type 3 case and the assembly instructions in the first part of the review. I’ve now had time to play with the board using the pre-installed Ubuntu 19.04 operating systems so I’ll report my experience in this second part. Note that ODROID-H2 does not rely on a custom version of Ubuntu, and instead you can download and flash Ubuntu 18.04 or 19.04 ISO directly from Ubuntu website. First Boot and System Information I had already connected two SATA drives inside the enclosure, one SSD and one HDD, but before booting the device I connected an HDMI cable, one Ethernet cable, USB keyboard & […]