Radair mini gateway is a multiple-purpose gateway with LoRaWAN, WiFi 6E, Bluetooth and Ethernet connectivity, a Quectel GNSS module, the ability to connect to the Helium network to mine HNT cryptocurrency, as well as a 4-in-1 Bosch environmental sensor to monitor temperature, humidity, pressure, and air quality. Radair mini gateway specifications: SoC – Quad-core Arm Cortex-A53 “crypto” CPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash, MicroSD card socket Connectivity WM1302 LoRa concentrator for LoRaWAN support Gigabit Ethernet RJ45 port 802.11 b/g/n/ac/ax Wi-Fi 6E and Bluetooth 5.2 via Mediatek MT7921AU module Dual Antenna – Wi-Fi 6E, LoRa GPS – Quectel GNSS module 4-in-1 Bosch environmental sensor Temperature & Humidity Pressure (Altitude accuracy +/- 1M) Air Quality (Carbon Monoxide, Bacteria, Smoke, Sulfur, Hydrogen) USB – 1x USB 3.2 Gen 1 Type C port (in front) for external accessories HW security – Microchip Technologies ECC608 secure element Misc – Reset/Bluetooth […]
MediaTek T830 to power 5G FWA routers and mobile hotspots
MediaTek T830 is a consumer premise equipment (CPE) SoC with a quad-core Cortex-A53 processor, an integrated Sub-6GHz 5G modem, hardware-based network acceleration engines,and optional support for Wi-Fi 6/6E, and son the new WiFi 7. It’s unrelated to the MediaTek Filogic 830 WiFi router SoC and instead, offers an upgrade to the MediaTek T750 5G chipset for higher performance multi-gigabit CPE products, such as fixed wireless access (FWA) routers and mobile hotspots (Mi-Fi) with up to 7 Gbps 5G speeds. MediaTek T830 specifications: CPU – 4x Arm Cortex-A55 cores @ up to 2.2 GHz GPU – Unnamed 3D GPU Networking accelerators MediaTek Network Processing Unit QoS Acceleration and Tunneling Offload Engine for VLAN / PPTP / L2TP / GRE Memory I/F – LPDDR4x / LPDDR5 Storage I/F – nMCP (NAND-based Multi-Chip Package) suggested. SPI, eMMC 5.1, and ONFI (Open NAND Flash Interface) supported Display I/F – MIPI DSI interface for up […]
Arduino “launches” WisGate Edge LoRaWAN gateways in collaboration with RAKwireless
Arduino was already involved in LoRaWAN with its MKR WAN 1300 board, but now the company has started offering Arduino-branded Wisgate Edge Pro and Wisgate Edge Lite 2 LoRaWAN gateways for respectively outdoor and indoor environments as part of the Arduino Pro family. If the names of the gateways seem familiar, it’s because Arduino collaborated with Rakwireless, and is simply using their existing LoRaWAN gateways. As I understand it RAKwireless will provide the hardware and technical support, while Arduino will sell the gateways and other LoRaWAN hardware through its existing customer base, more acting as a distributor. Arduino WisGate Edge Lite 2 indoor gateway specifications: SoC – MediaTek MT7628 MIPS processor @ 580 MHz System Memory – 128MB DDR2 Storage OS on flash SD card for setup and diagnostics, backup, and data logging Connectivity 10/100M Ethernet RJ45 port 2.4 WiFi (802.11b/g/n) with -95 dBm RX sensitivity, 20dBm Tx power; internal […]
KEEN Ranger PT 4G LTE camera supports animal and human detection
I’ve tested a few security cameras with human and vehicle detection capabilities, but Reolink has now added animal detection via the KEEN Ranger PT trail camera mostly designed to monitor four-legged animals in the wild. It’s somewhat similar to the Reolink Go Plus 4G camera with solar power support and 4G LTE connectivity, but also offers a 360° view with pan/tilt control, a low-glow IR night vision, a 0.5s fast trigger speed, as well as GPS to track the position of cameras or sightings of animals on the mobile app. KEEN Ranger PT camera key features and specifications: Camera/Video Image Sensor – 1/3″ CMOS Sensor Video Resolution – 2K 4MP high definition (2560 x 1440 @ 15FPS) Video Format – H.265 Lens – f= 2.8mm fixed, F=1.6 Field of View – Horizontal: 95°, vertical: 57°, diagonal: 115° Infrared Night Vision – 12x 940nm no-glow IR LED’s Night Vision Range – […]
ESP32 board with 150Mbps 4G LTE modem also supports RS485, CAN Bus, and relay expansion
LILYGO has designed another ESP32 board with a 4G LTE modem with the LILYGO T-A7608E-H & T-A7608SA-H variants equipped with respectively SIMCom A7608SA-H for South America, New Zealand, and Australia, and SIMCom A7608E-H for the EMEA, South Korean, and Thai markets, both delivering up to 150 Mbps download and 50 Mbps upload speeds. The board also supports GPS, includes a 18650 battery holder, and features I/O expansion headers that support an add-on board with RS485 and CAN bus interfaces, in a way similar to the company’s earlier TTGO T-CAN485 board with ESP32, but no cellular connectivity. LILYGO T-A7068E-H/T-A7608SA-H board specifications: Wireless Connectivity WiFi & Bluetooth – ESP32-WROVER-E module based on ESP32 dual-core processor @ 240 MHz with 4MB flash, 8MB PSRAM, 2.4 GHz WiFi 4 and Bluetooth 4.2/5.x connectivity, PCB antenna Cellular connectivity Data transfer speeds 4G LTE – Up to 150 Mbps downlink, up to 50Mbps uplink 3G HSPA+ […]
Quectel SG560D 5G & WiFi 6E module runs Android 12, targets AIoT applications
Quectel SG560D is a 5G Sub-6GHz & WiFi 6E module for AIoT applications that runs Android 12 on a Qualcomm QCM6490 SoC with an octa-core Kryo 670 64-bit Arm CPU and a Qualcomm Adreno 643L GPU. The SG560D module is equipped with 4GB LPDDR4X RAM and 64GB UFS storage by default, supports up to 2520×1080 MIPI display at a refresh rate of 144Hz, and can deliver up to 14 TOPS for AI inference. Quectel SG560D key features and specifications: SoC – Qualcomm QCM6490 octa-core processor with one Kryo 670 Gold plus high-performance core up to 2.7 GHz, 3x Kryo Gold cores at 2.4 GHz, 4x Kryo Silver low-power cores @ 1.9 GHz, Adreno 643L GPU, 6th gen AI Engine delivering up to 14 TOPS, up to 4Kp30 H.265/H.264 video encode, 4Kp60 video decode; 6nm process. System Memory – 4GB LPDDR4X by default Storage – 64GB UFS flash by default Display […]
Cavli Wireless C42GM module offers cellular IoT and Sigfox connectivity, optional GNSS and CAN Bus
Selecting an LPWAN IoT module usually means selecting a particular LPWAN standard, but Cavli Wireless C42GM global IoT module combines LTE Cat M1 and NB-IoT (NB1/NB2) cellular IoT connectivity with Sigfox for “use cases that need the hybrid LPWAN approach”. The module also comes with optional GNSS for asset tracking and/or time synchronization and there’s also a variant that adds CAN FD wired communication. The C42GM module can also be fitted with an eSIM (embedded SIM) pre-loaded global connectivity. C42GM module specifications: LPWAN Cellular (NB-IoT and eMTC) Bands Supported – LTE Bands: B1/B2/B3/B4/B5/B8/B12/ B13/B18/B19/B20/B25/B26/B28/B66 3GPP Release: LTE 3GPP E-UTRA Release 13 CAT M1/NB1/NB2 (Upgradable to Release 14) Download & Uplink Speed LTE Cat M1 – 1119Kbps (UL), 588Kbps (DL) NB1 – 60Kbps (UL), 20Kbps (DL) NB2 – 158.5Kbps (UL), 127Kbps (DL) Optional eSIM Optional Sigfox GNSS – GPS, GLONASS, Beidou I/Os – 1x USB2.0, 2x UART, 1x USIM, 9x GPIO, […]
u-blox unveils miniature MIA-M10 GPS module
u-blox has introduced what could be the world’s smallest GNSS module with the 4.5×4.5mm u-blox MIA-M10 miniature module supporting GPS, BeiDou, Galileo, and GLONASS satellite navigation systems. The MIA-M10 is said to be about half the size of competing products and has been specially designed for size-constrained battery-powered asset tracking devices, as well as space-constrained industrial sensors and consumer goods. The company also claims its power-save modes can double the battery life by balancing position accuracy and power consumption. u-blox MIA-M10 GNSS module specifications: GNSS – BeiDou, Galileo, GLONASS, GPS / QZSS Number of concurrent GNSS – 4 Oscillators MIA-M10C – Crystal MIA-M10Q – TCXO MIA-M10Q only – SAW filter, LNA Host Interfaces – 1x UART, 1x DDC (I2C compliant) Supply Voltage MIA-M10C – 1.3 to 1.98V MIA-M10Q – 1.76V to 3.6V Power Consumption – < 25 mW Dimensions – 4.5 x 4.5 x 1.0mm Temperature Range – -40°C to […]