gateworks News - Page 2 of 3 - CNX Software

August 29, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks GW5913 Compact NXP i.MX 6 SBC Supports PoE, GPS and 4G LTE Cellular Connectivity

Gateworks has announced a new Ventana SBC similar to their GW5530 board with 4G LTE connectivity, as GW5913 single board computer follows the same factor, and supports 4G LTE connectivity via mPCIe cards, but it replaces the microSIM card slot by a nanoSIM card socket, and adds a Gigabit Ethernet port with 802.11at PoE support. Gateworks GW5913 specifications: SoC – NXP i.MX 6Dual dual-core Arm Cortex-A9 processor @ 800MHz System Memory – 512MB DDR3-800 SDRAM Storage – 256MB Flash, serial configuration EEPROM Connectivity Gigabit Ethernet with PoE support Optional 4G LTE via high-power (up to 8W) Gen2 Mini-PCIe socket with USB 2.0 and nanoSIM socket Optional u-blox GPS Receiver with MMCX or U.FL Antenna Connector Expansion Connector – USB, UART, I2C, DAC, DIO Misc – Real-Time Clock with battery backup, voltage and temperature monitor, programmable watchdog timer Power Supply – 8 to 60VDC input voltage range via 2-pin power connector […]

July 10, 2019July 10, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks Ventana GW5910 SBC Targets WiFi, BLE & Sub-1GHz IoT Gateways

Freescale/NXP i.MX6 based Gateworks Ventana single board computers have been around at least since 2013 and were initially targeting networking processing applications for the industry. They could be used into all sort of gateways with cellular or WiFi connectivity for instance, thanks to the presence of mini PCIe sockets. But the latest Gateworks Ventana GW5910 SBC does not exclusively relies on mini PCIe cards for wireless connectivity, as it includes an onboard Laird Sterling 802.11b/g/n WiFi & Bluetooth module, as well as optional TI CC1352P dual-band Wireless MCU supporting Sub-1GHz and 2.4GHz RF, and an optional on-board u-blox GPS module, which should lower the total cost compared to solutions with mini PCIe cards. Ventana GW5910 specifications: SoC – NXP i.MX6 Dual Core Arm Cortex-A9 SoC Processor @ 800MHz System Memory – 512MB DDR3-800 SDRAM Storage – 256MB Flash System Memory, microSD card slot, mSATA socket Connectivity Gigabit Ethernet Port Onboard […]

May 10, 2019May 10, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks Introduces GW16126 Mini-PCIe Cat M1 Modem and Bluetooth LE Radio

Gateworks has launched another mini PCIe card providing IoT connectivity for their NXP i.MX 6 and Cavium Octeon TX powered SBC’s. Last month we covered GW16130 Mini PCIe satellite modem, and the company has now announced GW16126 mini PCIe card with a Cat M1 (eMTC) modem and a Bluetooth Low Energy radio for the US market, and other regions or countries where LTE Cat M1 networks have been deployed. Gateworks GW16126 mini PCIe card specifications: LTE Cat M1 Module – U-blox SARA-R410M-52 LTE CAT M1 cellular modem with up to 375 kb/s upload and 300 kb/s download; LTE Bands 2,4,5,12,13 SIM card – nano-SIM socket with hologram starter SIM included with free 1MB/month starter plan included BLE module – u-blox NINA-B301 Open CPU Bluetooth 5.0 Low Energy Radio based on Nordic Semiconductor nRF52840 chipset, Zephyr RTOS with Bluetooth HCI UART Host Interface. BLE Rates up to 2Mbps Antennas – 2x […]

April 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Gateworks GW16130 Mini PCIe Satellite Modem Targets IoT Applications

Some IoT applications may require 24/7 worldwide coverage, and cellular networks are suitable since they may not provide coverage in remote locations, at sea, or at altitude. The only solution in that case is to go with satellite communication through thank to networks such as the ones provided by Iridium Communications. Gateworks GW16130 makes it easy to add a satellite modem card to your projects thanks to it’s mini PCIe form factor and USB 2.0 interface. Gateworks GW16130 mini PCIe card key features & specifications: Iridium 9603N SBD (Short Burst Data) Satellite Transceiver Max Message payload – 340 bytes upload, 270 bytes download Automatic message notification on incomming messages Operates anywhere on earth including North & South Poles Supports E-mail messages or HTTP POST UART AT command interface Operating frequency – 1616MHz to 1626.5MHz 1.6W Average transmit power -117dBm Receiver sensitivity Onboard u.Fl antenna port for antenna connection Host Interface […]

November 16, 2018November 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Gateworks Newport GW6100 Miniature Networking SBC Comes with one GbE Port, one mPCIe Socket

Nearly exactly one year ago, Gateworks announced Newport family of networking SBCs powered by Cavium Octeon TX 64-bit Arm SoC, and earlier this year launched the higher-end GW6400/GW6404 boards with multiple network interfaces and mPCIe sockets. The company has now introduced the entry-level GW6100 mini Network SBC with just one Gigabit Ethernet port, one mPCIe socket, and a USB 2.0 type-C port. Gateworks Newport GW6100 specifications: SoC – Cavium OcteonTX CN8120 dual core ARMv8 processor @ 800MHz System Memory – 1GB DDR4 SDRAM Storage – 8GB eMMC Flash, mSATA via mini PCIe socket, serial configuration EEPROM Networking – Gigabit Ethernet Port Compliant with 802.3 10BaseT/100BaseTX/1000BASE-T USB – USB Type-C DFP featuring USB 2.0 up to 480Mbps and 1.5A Power Delivery Expansion High power (up to 8W) mini PCIe socket supporting PCIe or mSATA with USB 2.0 and Nano-SIM socket Application Connector with serial I/O, Digital I/O, I2C, and SPI Misc […]

May 11, 2018May 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Newport GW6400/GW6404 Arm SBC Comes with 5 Gigabit Ethernet Ports, 2 SFP Fiber Ports, and 4 mPCIe Sockets

Gateworks introduced their Newport SBC family based on Cavium Octeon TX Dual/Quad Core Arm processors at the end of last year, and the company has now announced the availability of the higher end models of their networking single board computers with Newport GW6400 & GW6404, which provide four mPCIe sockets for expansion, five Gigabit Ethernet ports, and in the case of GW6404, two optional SFP cages for fiber connections. GW6400 / GW6404 specifications: SoC GW6400 – Cavium OcteonTX CN8120 dual core processor up to 800MHz GW6404 – Cavium OcteonTX CN8130 quad core processor up to 1.5 GHz System Memory GW6400 – 1 GB DDR4 DRAM GW6404 – 2 GB DDR4 DRAM Storage – 8 GB eMMC Flash , micro SD card slot, serial configuration EEPROM Connectivity 5x GbE Ethernet ports GW6404 – Up to 2x optional SFP fiber ports (redirect of one or two of the RJ45 ports to SFP […]

November 11, 2017November 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Gateworks Newport SBCs Powered by Cavium Octeon TX 64-bit ARM SoC are Designed for Networking Applications

Gateworks is a US based company that provides embedded hardware solutions to mobile and wireless communications markets such as their NXP i.MX6 powered Ventana single board computers, including Ventana GW5530 SBC with compact form factor making it suitable for robotics projects and drones. The company has now launched a new family of single board computers with Newport boards based on Cavium Octeon TX dual and quad core processors, and targeting high performance network applications with up to 5 GbE copper Ethernet ports, 2 SFP ports for fiber. Eight boards from 4 board designs using the dual or quad core version of the processors will be launched in sequence until Q2 2018, but let’s first have a closer look at Newport GW6300/GW6304 boards’ specifications since they are available now: SoC GW6300 – Cavium Octeon TX CN8020 dual core custom ARMv8.1 SoC @ 800 MHz GW6304 – Cavium Octeon TX CN8030 quad […]

December 12, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.9 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux 4.9 on Sunday: So Linux 4.9 is out, and the merge window for 4.10 is thus open. With the extra week for 4.9, the timing for the merge window is obviously a bit awkward, and it technically closes in two weeks on Christmas Day. But that is a pure technicality, because I will certainly stop pulling on the 23rd at the latest, and if I get roped into Xmas food prep, even that date might be questionable. I could extend the merge window rather than cut it short, but I’m not going to. I suspect we all want a nice calm winter break, so if your stuff isn’t ready to be merged early, the solution is to just not merge it yet at all, and wait for 4.11. Just so you all know (I already bcc’d the main merge window suspects in a separate mailing last […]