gateworks

Posted on by Debashis Das - No Comments on Quectel FGH100M Wi-Fi HaLow module based on Morse Micro MM6108 receives CE and FCC Certifications

Quectel FGH100M Wi-Fi HaLow module based on Morse Micro MM6108 receives CE and FCC Certifications

Quectel and Morse Micro's FGH100M Wi Fi HaLow Module

In a collaboration, Quectel Wireless Solutions and Morse Micro have developed the FGH100M a Wi-Fi HaLow module, powered by Morse Micro’s MM6108 SoC. This module has achieved CE certification in Europe and FCC approval in the US, meeting high safety and environmental standards. After reading through the press release, I initially thought the 802.11.ah WiFi, known as WiFi HaLow, would be similar to other LPWAN standards like LoRaWAN or Sigfox. However, further research showed that Wi-Fi HaLow, operating in the 900 MHz band, was first announced in 2014 and got its name in 2016. However, in the following years, there wasn’t much interest in this wireless standard. But starting from 2021, it’s becoming more popular, and we’ve seen many HaLow-based products like a mini PCIe card, a WiFi HaLow development board, and a gateway kit to extend the range of IP cameras, and also ALFA Network’s AHPI7292S Raspberry Pi HAT […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Gateworks GW7400 networking SBC features 6 Gigabit Ethernet ports, M.2 & mini PCIe sockets for wireless connectivity

Gateworks GW7400 networking SBC features 6 Gigabit Ethernet ports, M.2 & mini PCIe sockets for wireless connectivity

NXP I.MX 8M Networking SBC 6 Ethernet ports

Gateworks Venice GW7400 is a rugged industrial single board computer for networking and gateway applications with six Gigabit Ethernet ports, and one M.2 and three mini PCIe sockets for WiFi, cellular, and other wireless options. We first mentioned the GW7400 board around three years ago, when the company introduced the Venice family powered by NXP i.MX 8M processor. But the board launched today has a different design with more Ethernet, an NXP i.MX8M Plus AI processor, up to 4GB RAM, up to 64GB eMMC flash, and various interfaces such as USB 3.0, dual CAN Bus, DIO, I2C, SPI, and UART. Gateworks GW7400 specifications: SoC – NXP i.MX 8M Plus CPU – Quad-core Cortex-A53 @ up to 1.6 GHz (industrial-grade) Real-time core – Arm Cortex-M7 @ up to 800 MHz GPU – Vivante GC7000UL 3D GPU, Vivante GC520L 2D GPU VPU – Up to 1080p60 video encoding and decoding AI accelerator […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Gateworks GW16146 is an 802.11ah WiFi HaLow Mini PCIe module

Gateworks GW16146 is an 802.11ah WiFi HaLow Mini PCIe module

GW16146v3 802.11ah WiFi Halow mPCIe module

Gateworks GW16146 is an 802.11ah WiFi HaLow Mini PCIe card designed to provide long-range wireless to IoT applications utilizing the company’s Venice and Newport single board computers. We first noticed 802.11ah WiFI LPWAN standard operating at 900 MHz for the Internet of Things in 2014, followed by Newracom NRC6101 chip in 2015, and the following year the Wi-Fi  Alliance decided to call the new standard “Wi-Fi HaLow“. I was expecting it to compete with the likes of LoRa and NB-IoT, but I have not heard much about it, and when I asked a WiFi module and board supplier earlier this year, they seemed surprised I would even be interested in this type of hardware and, obviously, did not have any… So it’s good to see some new hardware coming out. Gateworks GW16146 specifications: 802.11ah Halow connectivity Silex SX-NEWAH 802.11ah Module based on Newracom NRC7292 System-on-Chip (US only) Compliant with IEEE […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Venice GW7100 compact industrial SBC packs one Gigabit Ethernet port, one mPCIe socket

Venice GW7100 compact industrial SBC packs one Gigabit Ethernet port, one mPCIe socket

Venice GW7100 SBC

Gateworks introduced the new Venice Industrial IoT SBC Family based on NXP i.MX 8M Mini processor with up to two Ethernet ports and four mPCIe Sockets last September starting with GW7300 board with dual Gigabit Ethernet and three mPCIe sockets. But the US company has now announced the availability of the smallest member of the family with Venice GW7100 SBC equipped with just one Gigabit Ethernet port and one mPCIe socket in a compact 100x35mm form factor. Venice GW7100 specifications: SoC – NXP i.MX 8M Mini single, dual or quad-core Arm Cortex-A53 processor @ up to 1.6GHz, with Arm Cortex-M4 at 400+MHz, 3D GPU (OpenGL ES 2.0), 2D GPU, and 1080p VPU System Memory – 1 GB LPDDR4 (up to 4GB) Storage – 8 GB eMMC flash (up to 64GB) Connectivity 1x Gigabit Ethernet RJ45 port with passive PoE support WiFi/Bluetooth or Cellular connectivity via mini PCIe socket and Nano-SIM […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Gateworks GW7200 Dual Gigabit Ethernet industrial SBC, also supports WiFi, Cellular, and GPS

Gateworks GW7200 Dual Gigabit Ethernet industrial SBC, also supports WiFi, Cellular, and GPS

Gateworks GW7200 dual GbE industrial SBC

Gateworks GW7200 is a versatile dual Gigabit Ethernet industrial single board computer with an NXP i.MX8M Mini processor, 1GB to 4GB of RAM, mini PCIe expansion sockets for wireless connectivity, serial interfaces, industrial temperature range, wide range input voltage, and long-term supply. The board should be a better match to projects with industrial requirements, for example, an industrial IoT gateway than lower-cost dual GbE alternatives such as NanoPi R2S or Raspberry Pi CM4 IoT Router Carrier Board Mini. Gateworks GW7200 specifications: SoC – NXP i.MX 8M Mini quad-core processor @ 1.6GHz with Vivante 2D & 3D GPUs System Memory – 1GB to 4GB DDR4-2133 SDRAM Memory Storage – 8GB to 64GB eMMC flash, MicroSD card slot, serial configuration EEPROM Connectivity Dual GbE Ethernet ports supporting 802.3at/af and passive PoE Optional 802.11ac/n WiFi 5/4 via mini PCIe socket Optional  Cellular (Cat M1, 4G, 5G) via mini PCIe socket + NanoSIM card […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Using Google Coral mPCIe Card into a Compact Marvell Octeon TX Linux SBC

Using Google Coral mPCIe Card into a Compact Marvell Octeon TX Linux SBC

Google Coral mPCIe connected to Gateworks Newport GW5903 SBC

Google launched Coral mPCIe and M.2 cards at the very beginning of the year. The cards integrate the company’s 4 TOPS Edge TPU used for low power edge AI applications to bring the solutions to boards with mPCIe or M.2 sockets. Those are just hardware sockets that are optionally connected to USB, PCIe, I2C, etc… so you have to make sure the socket on your board exposes PCIe Gen2 x1. If you worry about compatibility, it’s good to get a board that’s known to work, and one of those is Gateworks Newport GW6903 SBC that offers two mPCIe sockets and features Marvell Octeon TX dual or quad-core Armv8 processor coupled with up to 4GB RAM. Besides the mini PCIe Coral card and Newport SBC, you’ll also need a Linux host and optionally a USB webcam for inference. The rest of the instructions are explained in the Wiki with the following […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Newport GW6903 is a Compact Marvell Octeon TX SBC with Gigabit Ethernet, Dual mPCIe, and USB 3.0

Newport GW6903 is a Compact Marvell Octeon TX SBC with Gigabit Ethernet, Dual mPCIe, and USB 3.0

Newport GW6903 SBC

Gateworks introduced its Newport SBC family powered by Cavium Octeon TX processors and designed for networking applications in 2017. One of those boards was a compact SBC with one Gigabit Ethernet port, an mPCIe socket, and a USB 2.0 Type-C port. The company has now launched Newport GW6903 SBC with the same 100x35mm form factor but with one Gigabit Ethernet port, two mPCIe sockets, and a faster USB 3.0 Type-A port. Newport GW6903 specifications: SoC – Cavium Marvell Octeon TX CN8120 dual-core Armv8 processor @ 800 MHz or Octeon TX CN8130 quad-core ARMv8 processor @ 1.5 GHz System Memory – 1GB DDR4 SDRAM (Option up to 4GB) Storage – 8GB eMMC flash (Option up to 64GB), serial configuration EEPROM Networking – Gigabit Ethernet Port with Passive PoE Support GNSS – Optional Ublox ZOE-MQ8 GNSS GPS Receiver with PPS support USB – USB 3.0 Type-A host port Expansion 2x Half Card […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Gateworks GW16122 IoT mPCIe Card Comes with Long Range Sub-GHz and 2.4GHz Radios

Gateworks GW16122 IoT mPCIe Card Comes with Long Range Sub-GHz and 2.4GHz Radios

Gateworks GW16122 Dual-Band IoT mPCIe Card

Gateworks GW16122 is a mini PCIe card that adds sub-GHz and 2.4GHz radio to the company line of Ventana and Newport Linux SBC’s, and is meant for industrial IoT (IIoT) applications as an alternative to LoRa and Sigfox. The second generation of the card is based on Texas instruments CC1352P dual-band wireless SoC that supports Wireless M-Bus, IEEE 802.15.4g, 6LoWPAN, KNX RF, and Wi-SUN at sub-GHz frequencies (EU: 868MHz, US: 915MHz), and Bluetooth 5 Low Energy, Thread, and Zigbee at 2.4 GHz. Gateworks GW16122 key features and specifications: MCU – Texas Instruments  CC1352P Arm Cortex-M4F MCU @ 48 MHz with 352KB flash, 80KB SRAM, dual-band wireless radio transmitter/receiver Radios Sub-1 GHz Radio 868MHz EU, 915 MHz US (default) Low Power, sensor nodes can run on a coin-cell battery -121dBm Receive Sensitivity for long-range communication 20dBm Output Power Texas Instruments TI-RTOS and TI-15.4 Stack M-Bus, IEEE802.15.4g, Contiki 6LoWPAN, Wi-SUN, KNX RF […]

Exit mobile version
UP 7000 x86 SBC