There’s currently a lot of articles about Apple, Samsung, and Google smart watches rumors in the blogosphere. I’ve written about other smartwatches in the past with products such as the Pebble or Wime Nanowatch, but those are based on low-end hardware that do not run Android directly, but instead communicate with your Android or iOS device via Bluetooth. The only watch I know that runs (a customized version of) Android is the “I’m Watch“. You’ll need relatively deep pockets to purchase it as price starts at 249 Euros / $349 US and goes up to $19,999 if you purchase the version with white gold and diamonds. So I decided to have a look if there are lower cost Chinese Android smartwatches around. The Z1 Android Smart Watch Phone showed up everywhere in my searches. The product is not new, as Charbax first discovered it in January 2012 and it was […]
iWave Systems Launches RainboW-G12M-Q7 SoMs Powered by TI Sitara AM389x/DM816x Processor
iWave Systems, an embedded systems company based in Bangalore, India, has unveiled new Qseven Modules powered by Texas Instruments Sitara AM389x/DM816x ARM Cortex-A8 microprocessor clocked up to 1.5 GHz. Rainbow-G12M-Q7 modules target applications such as Single-Board computers, network and communication processing, industrial automation, human machine interface (HMI), medical electronic devices, video surveillance systems and interactive Point-of-Service (PoS) kiosks. Here are the modules specifications: CPU – TI AM389x/DM8168 ARM Cortex-A8 based Sitara Processor operating up to 1.5 GHz Memory: 1GB DDR3 SDRAM 128 MB NAND Flash On-Board Micro SD slot 230-pin Qseven Edge Connector: 1x PCIe v2.0 1x HDMI 1.3 2x SATA LVDS channel 1 x USB 2.0 Host | 1x USB 2.0 device I2S Port SD/SDIO SPI & I2C ports Expansion Connector: Gigabit Ethernet HD Video IN/OUT Ports Analog Video OUT Audio IN/OUT ports UART, GPIOs Form factor – Qseven R1.20 compatible (70mm x 70mm) Temperature Range – 0 to […]
Advantech PCM-C3500 Series OMAP35xx SBC
Advantech announced the PCM-C3500 Series single board computers (SBC) powered by TI OMAP3503 or OMAP3530 processors with 128 to 256 MB SDRAM and 1 to 2 GB Flash (optional) . These heatsink-free boards are targeted for various low-power applications in industrial control, HMI/kiosk, medical, and portable applications.The boards will run Windows CE 6.0 (default), Embedded Linux 2.6 and Android 2.2. Here are the specifications for PCM-C3500 SBC: CPU – PCM-C3530: TI OMAP3530 @ 600 MHz / PCM-C3503: TI OMAP3503 @ 600 MHz DSP – Built-in 430-MHz TMS320C64x+™ DSP Core (PCM-C3530 only) 2D/3D Accelerators – OpenGLES 1.1 and 2.0, OpenVG1.0 (PCM-C3530 only) OS – WinCE6.0 English professional version as default, and Linux DRAM – PCM-C3530: 256 MB, PCM-C3503: 128 MB (Optional: 256 MB) Onboard Flash – PCM-C3530: Default 2 GB, (Optional: 0 GB, 1 GB) /PCM-C3503: Default 0 GB, (Optional: 1 GB, 2 GB) RTC Watchdog Power Management – Standard, idle […]
Installing Android 2.2 on Sony Ericsson Xperia X10
XDA recently released a ROM with Android 2.2.1 (Froyo) for Sony Ericsson Xperia X10. Bear in mind that this is still a BETA version with the following known bugs and limitations: Closing certain apps will cause the ROM to crash or reboot Youtube / Adobe Flash status uncertain No camcorder recording No native wifi/usb tethering You’ll need to log into the old market at least once before installing the new one Maybe more. All sort of bad things may happen to your phone, but if xRecovery is correctly setup you should be able to recover. If you still want to go forward, following the “simple” steps below. First download the following files: FreeX10-beta2.zip – Xperia X10 Android 2.2 Firmware FreeX10-beta2-hotfix1.zip – flash led brightness and Rockplayer hack gapps_1901_FreeX10.zip– latest Google Apps (Market, Youtube etc.) Here’s what you’ll need before installing Android 2.2: Rooted 2.1 ROM. Instructions for doing so are […]