ethernet News - CNX Software - Embedded Systems News

March 5, 2025March 5, 2025 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

LILYGO T-Connect Pro industrial IoT controller offers Ethernet, WiFi, Bluetooth, LoRa, RS232, RS485, and CAN Bus

LILYGO T-Connect-Pro ESP32-S3 LoRa Industrial Controller

LILYGO T-Connect Pro is a DIN rail-mountable, ESP32-S3-based industrial IoT controller with Ethernet, WiFi 4, Bluetooth 5.0 LE, and LoRa connectivity, as well as CAN Bus, RS232, and RS485 interfaces. The controller also features a 2.33-inch touchscreen display, a 10A relay, a 12V to 24V DC screw terminal for power, 5V USB-C port for programming, a Qwiic connector for expansion, and BOOT and Reset buttons. LILYGO T-Connect Pro specifications: SoC – Espressif ESP32-S3R8 CPU – Dual-core Tensilica LX7 microcontroller up to 240 MHz with vector instructions for AI acceleration Memory – 8MB PSRAM Wireless – WiFi 4 and Bluetooth 5.0 LE + Mesh connectivity Storage – 16MB SPI flash Display – 2.33-inch RGB display with 480×222 resolution via ST7796 SPI display controller with touchscreen using CST226SE chip Networking 10/100Mbps Ethernet RJ45 port via W5500 4-wire SPI controller WiFi 4 and Bluetooth 5.0 LE via ESP32-S3 LoRa via HPD16A Semtech SX1262 […]

March 2, 2025March 6, 2025 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Citronics built a router based on the Fairphone 2 mainboard

Destore Citronics Fairphone 2 industrial gateway

Belgium-company Citronics has designed a router based on the mainboard of the Fairphone 2 smartphone, connecting the Qualcomm Snapdragon 801 “system-on-module” to a carrier board with Ethernet, USB ports, and other connectors, while leveraging 4G LTE, WiFi, and Bluetooth connectivity from the phone’s core board. Citronics calls this type of hardware “Circular Microcomputers,” which refers to small computers focusing on sustainability and circular economy principles using parts from discarded devices like old smartphones. There’s actually more than one router, as Citronics designed its own development kit, and also partnered with other companies to design custom gateways based on the Fairphone 2 mainboard. Let’s have a look at the devkit first. Citronics devkit: Fairphone 2 mainboard SoC – Qualcomm Snapdragon 801 (MSM8974AB) quad core Krait 400 processor @ up to 2.26 GHz with Adreno 330 GPU System Memory – 2 GB LPDDR3 Storage – 32GB eMMC flash Connectivity – 2G/3G/4G LTE, […]

January 21, 2025January 20, 2025 by Debashis Das - 4 Comments

Solderable Rockchip RV1106 system-on-module features 112 castellated pins, offers WiFi 6 and Bluetooth 5.2 connectivity

Luckfox has recently released the Core1106 Core Board Rockchip RV1106 system-on-module with a compact 30x30mm size, 112 castellated pins designed to be soldered on top of a PCB, and an optional WiFi 6 and Bluetooth 5.2 module and IPEX 1.0 antenna connector. The Rockchip RV1106 camera SoC integrates 128MB (G2 version) or 256MB (G3 version) DDR3L memory, a 4th-gen 1 TOPS NPU, and a 3rd-gen Image Signal Processor (ISP) that supports hardware video encoding (H.264/H.265). Other interfaces include MIPI CSI, RGB LCD, USB, Ethernet, GPIO, SPI, I2C, UART, and more. These features make this board suitable for applications like AI-driven image recognition, smart cameras, IoT devices, and edge computing. Luckfox RV1106 system-on-module specifications SoC – Rockchip RV1106G2/G3 CPU – Arm Cortex A7 @ 1.2GHz with an integrated RISC-V co-processor. NPU 4th-gen Rockchip NPU with hybrid quantization (int4, int8, int16) 0.5 TOPS (RV1106G2) or 1 TOPS (RV1106G3) ISP – 3rd-gen 5MP high-performance ISP, HDR, WDR, […]

January 6, 2025January 6, 2025 by Tomisin Olujinmi - No Comments

ZigEasy GEX is a series of ZigBee 3 & DigiMesh coordinators powered by the XBee 3 and XBee SX 868 modules

ZigEasy GEX Zigbee DigiMesh coordinators

The ZigEasy GEX series is a lineup of Zigbee / DigiMesh coordinators and Ethernet gateways based on Digi International’s XBee 3 and XBee SX 868 modules. These devices connect a ZigBee or DigiMesh network to a local Ethernet network or the internet. This makes it easier to create a robust Zigbee/DigiMesh network that can send and receive data from servers. The GEX2400 and GEX2400S devices integrate the Digi XBee3 module which supports Zigbee, 802.15.4, DigiMesh, and BLE and is configured directly with the XCTU software (USB or TCP/IP). The Digi SX 868 module on the GEX868 and GEX868S coordinators only supports DigiMesh. The “S” models include TLS 1.2 and AES-256 encryption for secure internet communication and are ideal for use cases that require internet access. These ZigEasy GEX Zigbee / DigiMesh coordinators can be used in mesh networks for smart homes, monitoring weather conditions, and tracking agricultural data. They can […]

December 31, 2024December 31, 2024 by Sayantan Nandy - 4 Comments

Luckfox Pico WebBee – A Rockchip RV1103 USB & Ethernet development board for web servers, scripting, and Smart Home applications

Luckfox Pico WebBee Rockchip RV1103 development board

Luckfox has launched the Pico WebBee, a Linux-based micro development board powered by the Rockchip RV1103 Cortex-A7 SoC with 64MB of on-chip RAM. Externally, the Pico WebBee resembles a USB dongle enclosed in an ABS case with a USB Type-A port and a 100Mbps Ethernet RJ45 port. Additionally, it includes an internal microSD card slot and a boot button. The board is designed for applications such as lightweight web servers, USB scripting tools, and smart home devices. It’s not quite the first Rockchip RV1103 solution from Luckfox, as we previously covered the Luckfox Pico Mini Arm Linux camera board and the Luckfox Pico Plus camera board with an Ethernet port. The Pico WebBeee is quite different in its form factor (it’s a complete device), and it also lacks a camera interface. Luckfox Pico WebBee specifications: SoC – Rockchip RV1103 G1 CPU – Single-core Arm Cortex-A7 processor @ 1.2GHz + RISC-V […]

December 29, 2024 by Debashis Das - No Comments

Firefly’s CSB1-N10 series AI cluster servers can deliver up to 1000 TOPS of AI power with Rockchip or NVIDIA Jetson Modules

Firefly has recently introduced the CSB1-N10 series AI cluster servers designed for applications such as natural language processing, robotics, and image generation. These 1U rack-mounted servers are ideal for data centers, private servers, and edge deployments. The servers have multiple computing nodes, featuring either energy-efficient processors (Rockchip RK3588, RK3576, or SOPHON BM1688) or high-performance NVIDIA Jetson modules (Orin Nano, Orin NX). With 60 to 1000 TOPS AI power, the CSB1-N10 servers can handle the demands of large AI models, including language models like Gemma-2B and Llama3, as well as visual models like EfficientVIT and Stable Diffusion. CSB1-N10 series specifications All CSB1-N10 AI servers have the same interfaces, and the only differences are the CPU, memory, storage, multimedia, AI capabilities, and related software support. So it’s likely Firefly has made Rockchip system-on-modules compatible with NVIDIA Jetson SO-DIMM form factor, and indeed we previously noted that Firefly designed Core-1688JD4, Core-3576JD4, or Core-3588JD4 […]

December 27, 2024December 27, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

GigaDevice GD32H75E – A 600MHz Arm Cortex-M7 MCU with an EtherCAT SubDevice Controller

GigaDevice has launched its first EtherCAT SubDevice Controller with the GDSCN832 along with the 600 MHz GD32H75E Arm Cortex-M7 microcontroller series which incorporates the EtherCAT SubDevice Controller. The GH32G57E microcontroller also comes with 1024KB SRAM, 3840 KB flash with protection, up to two Ethernet PHY, USB Full Speed and High-Speed interfaces, and a range of peripherals and timers. Both products are made for the industrial automation market and are suitable for servo control, variable frequency drives, industrial PLCs, and communication modules. Gigadevice GD32H75E specifications: CPU – Arm Cortex-M7 32-bit processor core operating at 600 MHz frequency Memory and Storage 512KB AXI SRAM 512KB RAM shared (ITCM/DTCM/AXI) memory 3840 KB on-chip Flash memory with security protection to prevent illegal code/data access External memory controller (EXMC) for SRAM, PSRAM, ROM, and NOR Flash Accelerator – Filter arithmetic accelerator (FAC) and Trigonometric Math Unit (TMU) Industrial communication 2x Ethernet PHYs (YMJ6 parts only) […]

December 27, 2024December 27, 2024 by Sayantan Nandy - 4 Comments

Luckfox Lyra boards feature Rockchip RK3506G2 triple-core SoC, display interface, optional Ethernet port

Luckfox Lyra RK3506G2 RJ45 display interface

The Luckfox Lyra boards feature a Rockchip RK3506G2 triple-core Arm Cortex-A7 SoC with one Cortex-M0 real-time core, 128MB on-chip DDR3, a MIPI DSI display interface, and built on a 22nm process. Three versions are available with the Luckfox Lyra, Lyra B (with 256MB flash), and Luckfox Lyra Plus offering similar features, but the longer Plus model also adds a 10/100Mbps Ethernet RJ45 connector besides having 256MB SPI NAND flash. These are Luckfox’s first boards featuring the RK3506G2 processor, offering Ethernet connectivity and a display interface. But it’s not quite the first Arm Linux board from the company with Ethernet and a display interface, and we covered the Luckfox Pico Ultra micro development board all based on a Rockchip RV1106G3 SoC earlier this year. The company also introduced the similar-looking LuckFox Pico Pro and Pico Max boards powered by an RV1006G2 SoC in February, but instead of a display interface, they […]