esp32 News - Page 71 of 81 - CNX Software

December 31, 2018December 31, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Year 2018 in Review, Top 10 Posts, and Some Stats

That’s it, we’ve already reached the last day of 2018, and it’s time to have a look back at what happened during the past year. On the mini PC front, Gemini Lake based mini PCs took over from Apollo Lake with some performance improvements, but I expected the price point to be a bit lower than it is today. Apart from further developments with regards to mobile processors, it feels 2018 was an off-year for processors, such as the ones found in TV boxes and development boards, with mostly more of the same. Allwinner and Rockchip did not release any really interesting processor, and Amlogic only launched S905X2 and S905Y2 which are mostly evolutions of their previous generation with an OpenGL 3.x capable GPU and USB 3.0. Rockchip RK3399 stood out this year, as despite being launched in 2016, it suddenly became popular again with many RK3399 SBCs coming to […]

December 2, 2018April 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Particle Mesh Networking Review – Part 2: Getting Started Guide with Argon & Xenon

Particle Mesh Network Argon Xenon Success

I’ve recently received a Particle Mesh IoT Development Kit with one Argon WiFi + Mesh (802.15.4) board acting as gateway, three Xenon Mesh boards, and various sensors and accessories. I’ve already showcased the hardware in the first part in the review, so in this post I’ll post my experience getting started with Particle Mesh networking using the kit. Beside the kit, you’ll need a few micro USB cables, a mobile phone running Android or iOS, a reliable Internet connection (more on that later), and a host PC for programming and debugging potential issues. Setting Up Particle Argon & Xenon boards First we’ll need to configure / setup the boards. Go to https://setup.particle.io to login or create an account if you don’t already have one, and you should be brought the following page. Select Mesh, and you’ll be asked to setup a gateway first. Any of the boards from Particle Mesh […]

November 19, 2018November 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PyGo Wearable Devices Create LoRa Mesh Networks (Crowdfunding)

Pycom has made some interesting IoT boards running MicroPython in the past starting with WiFi capable WiPy in 2015, and followed by various others supporting various wireless standard including Bluetooth, LoRa, Sigfox, and NB-IoT with LoPy and Fipy. The company launched all their boards via crowdfunding campaigns, and they are now back on Kickstarter for their PyGo plug-n-play wearable devices creating PyMesh networks with up to 12km range between nodes, and managed using Pylife mobile app. Typical use cases include basic connectivity (e.g. messaging) in remote areas without cellular access, and assets / pets / kids location tracking, There are two version of PyGo: PyGo1 with mesh networking only, and PyGo2 that adds cellular network access. Pygo hardware specifications: SoC – Espressif Systems ESP32 dual core WiFi 4 + BLE SoC System Memory – 64 Mbit (8MB) RAM Storage – 8MB flash Display – 128×36 OLED display Connectivity PyMesh up […]

November 14, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Giveaway Week Winners – November 2018

We just had a week of fun on CNX Software with our yearly “Giveaway Week” activity where 7 prizes – from development boards to Raspberry Pi add-on boards or solar chargers – were randomly given away to people who entered by leaving a comment. The winners are in, with Asia starting strong, but Europe quickly taking the lead, and the US ending up the giveaway with a great (again) finish. Here’s the full list of winners: Videostrong VS-RD-RK3399 development board – Việt trần, VIETNAM CHOETECH Solar Charger – Erki, ESTONIA ESP32-LyraTD-MSC audio mic HDK – Ron, The Netherlands ROC-RK3328-CC development board – Dainis, LATVIA (a second time winner having previously won during Giveaway Week 2016) ThaiEasyElec 3G GPS Raspberry Pi Hat – zmlopez, SPAIN ANAVI Infrared and RGB strip pHAT – Joe, USA NanoPC-T4 development board – Jeffrey, USA I’ve just send all 7 packages earlier this afternoon. Hopefully, the […]

November 7, 2018November 9, 2018 by Jean-Luc Aufranc (CNXSoft) - 108 Comments

Giveaway Week – ESP32-LyRaTD-MSC Audio Misc HDK

ESP32-LyraTD-MSC is a smart audio hard development kit based on ESP32 WiSoC that I plan to send to one of my readers as part of Giveaway week. I had the chance to test ESP32-LyraTD-MSC with Baidu DuerOS voice assistant back in February which requires you to speak Mandarin, but now the board has become more useful outside of China with the release of Espressif ESP-ADF audio development framework and support for Amazon Alexa and Google Assistant. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same IP and/or email address. Contests are open for 48 hours starting at 10am (Bangkok time) every day. Comments will be closed after 48 hours. If comments are open, the contest is still going on. Winners will be selected with random.org, and announced in the comments section of […]

November 3, 2018August 6, 2021 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Particle Mesh IoT Development Kit Review – Part 1: Unboxing

Back in February of this year, Particle introduced three low cost IoT development boards based on Nordic Semi nRF52840 wireless chip supporting “Particle Mesh” networking based on the 802.15.4 radio in the chip and OpenThread implementation of Thread IoT communication protocol. The company recently announced they were now shipping the kits pre-ordered earlier this year, and released two IoT development tools based on Node-RED and Visual Studio Code. Particle contacted me as well as to find out whether I was interested in reviewing their latest WiFi / Bluetooth / Mesh kit, and I’ve just received the bundle, which comes with a bunch of items, so I decided to write an unboxing post first to have a first look at the hardware, before playing with it in one or two weeks. Particle Mesh IoT Development Kit Bundle Unboxing That’s what I got from UPS… From top left to bottom right: The […]

October 26, 2018October 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

$94 MAKERphone DIY Mobile Phone Supports MicroPython, Arduino IDE, and Scratch (Crowdfunding)

If you ever wanted to buy a mobile phone that you can assemble yourself, RePhone Kit Ctreate going for $59 is a nice option, but in truth it does not exactly look like your typical phone with its almost square shape. It’s also good to have more option, that’s exactly what MAKERphone is offering with a DIY mobile phone targeting the educational market. Beside the educational value of the assembly also involving some soldering skills depending on the selected kit, kids will be able to learn to program the phone with MicroPython, the Arduino IDE (C language), and/or Scratch visual programming. MAKERphone kit content and specifications: MAKERphone circuit board with 8x user LEDs for backlight (and special effects), 4-way mechanical joystick, 12-button numeric keypad, A, B, C, D, E, and F buttons, DS3231 RTC chip, vibrator… Main microcomputer module based on Espressif Systems ESP32 WiSoC with 802.11 b/g/n WiFi, Bluetooth […]

October 24, 2018 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$16 ESP32-A1S ESP32 Audio Development Kit Comes with 2 Microphones, Audio Jacks & Headers

Espressif ESP32 WiSoC can be integrated into various applications, and earlier this year Espressif Systems released ESP32 LyraTD MSC Audio Mic HDK (Hardware Development Kit) which I could test with Baidu DuerOS using Mandarin. Since then the company released the ESP-ADF Audio Development Framework that beside Baidu DuerOS, now supports Google Assistant and Amazon Alexa, so you don’t need to speak or learn Chinese to use the kit! 🙂 Another ESP32 audio board was the similarly named ESP32-LyraT, and now we have at least more more option with Seeed Studio selling ESP32-A1S WiFi + Bluetooth ESP32 audio development kit for $16.90 on their store. ESP32-A1S ESP32 audio development kit specifications: Wireless Module A.I. Thinker ESP32-A1S module based on ESP32 dual core Tensilica CPU clocked at up to 240MHz with 520 KB SRAM, and 8MB on-module PSRAM 802.11 b/g/n WiFi and Bluetooth 4.2 LE Storage – Micro SD card slot up […]