electronics News - Page 2 of 20 - CNX Software

December 14, 2023December 14, 2023 by Sponsored Post - 2 Comments

JLCPCB now offers flex PCB manufacturing services starting at $15 (Sponsored)

Flexible PCB Stainless Steel Stiffener + FR4 Stiffener + 3M Tape Stiffener

JLCPCB, arguably the most popular and best PCB manufacturer in the community, has now started to offer a flex PCB manufacturing service with a special price starting at $15 and up to $54 coupon codes for new users. A flex PCB, also called flexible PCB or flexible printed circuit (FPC), is made by creating copper traces on a polyester or polyimide film and can used to fit into electronic products in the consumer, communication, medical, automotive, aviation, and military industries. Its main benefits are its flexibility so a flex PCB can arbitrarily be bent and moved replacing regular cables, especially on moving parts, and its size and light weight that allows them to be integrated with high reliability into products with a small form factor. JLCPCB supports flex PCBs from 8x12mm to 234×490 in size with the full JLCPCB flex PCB capabilities shown in the table below. Hardware engineers can […]

September 29, 2023September 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Samsung LPCAMM integrates LPDDR RAM on removable modules

Samsung has unveiled a new type of removable memory module called the LPCAMM (Low Power Compression Attached Memory Module) with LPDDR designed for PCs and laptops, and the company expects them to eventually be used in servers found in data centers. I would also not be surprised to find them in embedded systems in the future, for example in an updated COM Express standard. Laptops typically come with either low-power DDR (LPDDR) soldered to the motherboard or SO-DIMM modules with DDR memory chips, but there weren’t any removable modules with low-power memory so far, and Samsung LPCAMM changes that. The new LPCAMM module will initially be fitted with LPDDR5X chips and deliver a 50% performance boost (up to 7500 MT/s), improve power efficiency by 70%, and reduce the mounting area by 60% (78 x 23mm) compared to SO-DIMM modules A main factor in reducing the area required is that two […]

September 19, 2023September 22, 2023 by Sponsored Post - Comments Off

Review of ALLPCB PCB manufacturing services with an ESP8266 board (Sponsored)

ALLPCB, a PCB manufacturer based in China, has offered us to review their PCB manufacturing services. We’ve taken them up on their offer and will report our experience with the ordering process, shipping, and the board itself, in this review. We will be using the E66 Transmitter board based on an ESP8266 module, and designed to read values from an I2C sensor and send them over RS485 using the Modbus RTU protocol for a range of up to 1.2 km. Since the E66 Transmitter can also connect to WiFi thanks to the ESP8266 module, Modbus TCP is also supported. Since we have our PCB design ready, we can go to the ALLPCB website to start the ordering process. We just had to upload the Gerber files, and then select parameters such as the number of boards, the number of layers, thickness, material type, and whether to include a Stencil or […]

August 9, 2023August 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Raspberry Pi Pico to Arduino Uno adapter relies on “FlexyPins” for castellated holes

Raspberry Pi Pico Arduino UNO adapter FlexyPins

Solder Party’s “Raspberry Pi Pico to Uno FlexyPin Adapter” transforms the Raspberry Pi Pico into an Arduino UNO without soldering the board directly or using headers, but instead relying on FlexyPins flexible pins to attach the Pico board to the adapter using its castellated holes. The end result is basically the same as for the WisdPi ArduPico board, except the Raspberry Pi Pico is soldered to the main PCB on the latter, but it can be easily removed from the Solder Party’s Uno adapter board to be replaced with another compatible model, e.g. Raspberry Pi Pico vs Pico W. The FlexyPins can be used with any board or module with castellated holes, but it’s obviously especially useful for castellated modules without through holes, for example, to easily program a bunch of ESP32 modules. You’ll first need to get a few FlexyPins as shown below. Then solder them to a compatible […]

July 6, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

VL53L7CX Time-of-Flight (ToF) sensor offers camera-like 90° field of view

STMicroelectronics VL53L7CX is the latest FlightSense multi-zone Time-of-Flight (ToF) distance sensor from the company with the main highlight between its camera-like 90° diagonal field of view, derived from a 60° x 60° field of view… This is a significant improvement over the 61° diagonal field of view of the previous generation ToF sensors such as the VL53L8 or VL53L5CP, and the wider field-of-view is said to bring “lifelike situational awareness” to applications like home automation, computers, house appliances, robots, and industrial equipment with full-privacy since ToF sensors do not capture photos or videos like traditional cameras. STMicro VL53L7CX key features and specifications: 940 nm invisible light vertical cavity surface emitting laser (VCSEL) and integrated analog driver 60° x 60° square field of view (FoV) (90° diagonal) using diffractive optical elements (DOE) on both transmitter and receiver enabling square FoV Receiving array of single photon avalanche diodes (SPADs) Multizone ranging output […]

June 8, 2023June 8, 2023 by Sponsored Post - 1 Comment

Lansheng Technology stocks over 400,000 types of electronic components from 40 silicon vendors (Sponsored)

Established for more than 10 years in Shenzhen, Lansheng Technology Limited is a spot stock distributor with an inventory of over 400,000 different electronic components from well-known brands with affordable pricing and technical support. The company has stock for electronic components from STMicroelectronics, Toshiba, Microchip, Vishay, Marvell, ON Semiconductor, AOS, DIODES, Murata, Samsung, Hyundai/Hynix, Xilinx, Micron, Infineon, Texas Instruments, ADI, Maxim Integrated, NXP, and more, and ensures prompt delivery by handling logistics with UPS, DHL, and FedEx. Some of their customers include global electronics manufacturers such as NORCO China, CRRC, Foxconn, Gree, Huawei, Lenovo, ZTE, Datang Mobile, China Aerospace, and SINOMACH, and the company provides other solutions such as long-term orders from original authorized distribution agents, three-day delivery supply solutions for scarce components, resale of excess materials, inventory optimization, BOM matching, and small batch supply. In order to provide quality services, genuine components, and limit the number of returns, every […]

June 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Analog Discovery 3 – A 125 MS/s USB oscilloscope, waveform generator, logic analyzer, and variable power supply

Digilent Analog Discovery 3 is a USB oscilloscope with a sample rate of up to 125 MS/s, that can also be used as a waveform generator, logic analyzer, and/or a variable power supply up to 5V. Several other features are also enabled through its software and the USB-C oscilloscope can also act as a spectrum analyzer, a network analyzer, an impedance analyzer, a protocol analyzer, a data logger, a voltmeter, and supports in-app scripting. Analog Discovery 3 features highlights: Xilinx FPGA-based design Host interface – USB Type-C port Oscilloscope 2x differential channels with 14-bit resolution at up to 125 MS/s per channel with a +/-25 V input range, 30+ MHz bandwidth with BNC Adapter User-configurable input filters and lock-in amplifier FFT, Spectrogram, Eye Diagram, XY Plot views, and more Arbitrary Waveform Generator 2x channels with 14-bit resolution at up to 125 MS/s per channel with a +/-5 V output range, […]

May 9, 2023May 12, 2023 by Sponsored Post - 2 Comments

Try ALLPCB PCB manufacturing services for just $1 (Sponsored)

ALLPCB is a PCB manufacturer founded in Hangzhou in 2015 that has built up a super Electronic Collaborative Manufacturing Service system (ECMS) covering PCB, SMT, Electronic components, and other fields. The company has now launched a promotion to lets hardware designers try out its services for only $1 for up to five pieces of 6-layer PCBs not exceeding 150x100mm in size. The company now has more than 170,000 customers from over 160 countries and processes 5,000 files daily with a 99.15% on-time delivery rate. ALLPCB serves customers in a wide range of sectors that cover consumer electronics, communication equipment, Industrial Control (ISC), electronic instruments and apparatus, intelligent hardware, Internet of Things (IoT) applications, Industry 4.0 solutions, and many more. If you want to give ALLPCB service a try for $1, go to the ordering page, select the number of layers and dimensions within the boundaries of the promotion, and click […]