edison News - CNX Software - Embedded Systems News

July 24, 2017November 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Variscite DART-6UL SoM, an Alternative to Intel Edison Module

Intel recently announced it will discontinue manufacturing and selling all SKUs of the Intel® Edison compute modules and developer kits. The initial version of Edison was released in the beginning of 2014, with a second version being released by the end of 2014. It was intended for the IoT market, with dimensions of 35.5x25x3.9mm. The Edison features an Intel Atom processor, consisting of two Atom Silvermont cores running at 500MHz. It includes a fixed configuration of 1GB integrated RAM, and 4GB eMMC flash on-board. Dual-band (2.4GHz and 5GHz) Wi-Fi, Bluetooth 4.0 and USB controllers complete the package. According to Intel’s announcement, the last shipment of Edison family boards is planned for December 2017. This announcement will have a critical impact on companies that already integrated the Edison board in their products, as well as the many companies that engaged in the development process of integrating the Edison board into their products. While some of these companies are rushing to place […]

June 19, 2017June 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Intel Issues End-of-Life Notices for Galileo / Galileo 2, Edison and Joule Boards & Modules

While I’m not sure many of my readers are using them, Intel introduced several IoT development kits and modules over the years, with products like Intel Galileo, followed by Galileo 2, Edison module development board all based on Quark processors, and more recently Intel Joule modules powered by Intel Atom T550x / T570x processors. The three boards / modules and corresponding modules will soon be no more, as Intel issues three end-of-life (EOL) notices for: Intel Galileo Board, and Intel Galileo Gen2 Board Products – PDF Select Intel Edison Compute Module, Intel Edison Breakout Board, Intel Edison Kit for Arduino, and Intel Edison Breakout Board Kit Products – PDF Intel Joule 570x Compute Module, Intel Joule 550x Compute Module, Intel Joule 570x Developer Kit and, Intel Joule 550x Developer Kit Products – PDF All three follow the same “forecasted key milestones”: June 16, 2017 – Product Discontinuance Program Support Begins […]

May 12, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Visualizing Electronics Manufacturing Price Variation with Volume and Lead Time

Google Android Things developers announced a production hardware sample based on Intel Edison module: Android Things is focused on helping developers build production ready devices that they can bring to market. This means building custom hardware in addition to the app software running on the Android Things system-on-module (SoM). As a part of this effort we have released Edison Candle, the first in a series of production samples designed to showcase hardware and software designed to work together. The code is hosted on GitHub and the hardware design files are on CircuitHub. That’s what the Edison Candle looks like. It’s just demo hardware to show how to build a product with a system-on-module (Intel Edison) for Android Things with everything released in Github. You can also purchase the board on CircuitHub, but then I saw the price was around $356 for such a simple board (without Edison). That’s quite a […]

December 14, 2016December 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Android Things OS for the Internet of Things Supports Raspberry Pi 3, Intel Edison, and NXP Pico Boards

Google introduced Project Brillo a little over a year ago, an operating system based on Android, but with a smaller footprint optimized for Internet of Things applications. Brillo has now just become Android Things OS, with Google releasing a developer preview of Android Things working on Raspberry Pi 3, Intel Edison, and NXP Pico boards. The company has also updated the Weave platform to simplify connection of all types of devices to the cloud, and interaction with services like the Google Assistant. The Weave Device SDK currently supports schemas for light bulbs, smart plugs, switches, and thermostats, with more type of device supported in the future, as well as a mobile app API for both Android and iOS. Using an Android based OS instead of a pure Linux OS should make it easier for Android app developers to create smart devices thanks to the use of familiar Android APIs and […]

November 23, 2015November 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

How to Build Brillo Operating System from Source Code and Run Brillo Emulator

Google formally launched Brillo operating system a few weeks ago. The new operating system is a stripped down version of Android that targets Internet of Things (IoT) applications, and more recently the company pushed the source code to their servers. So I’ve given it a try by checking out the code, building Brillo emulator for Intel/AMD, and running it in Ubuntu 14.04 64-bit. First you’ll need to retrieve the source code:

mkdir brillo-master
cd brillo-master
repo init -u https://android.googlesource.com/brillo/manifest -b master
repo sync -j8

mkdir brillo-master

cd brillo-master

repo init -u https://android.googlesource.com/brillo/manifest -b master

repo sync -j8

It took a few hours here with some errors the first time, so I tried again and I finally got the code a few hours later. Once this is done, set the build environment and configuration:

source build/envsetup.sh && lunch

1	source build/envsetup.sh && lunch

Lunch will bring a list of possible builds:

You're building on Linux

Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_arm64-eng
3. aosp_mips-eng
4. aosp_mips64-eng
5. aosp_x86-eng
6. aosp_x86_64-eng
7. brilloemulator_arm64-eng
8. brilloemulator_arm-eng
9. brilloemulator_x86_64-eng
10. brilloemulator_x86-eng
11. edison-eng
12. mini_emulator_arm64-userdebug
13. m_e_arm-userdebug
14. mini_emulator_x86_64-userdebug
15. mini_emulator_x86-userdebug
16. brillo_gpios-userdebug
17. brillo_i2c-userdebug
18. brillo_leds-userdebug
19. ledflasher-userdebug

Which would you like? [aosp_arm-eng] 9

You're building on Linux

Lunch menu... pick a combo:

1. aosp_arm-eng

2. aosp_arm64-eng

3. aosp_mips-eng

4. aosp_mips64-eng

5. aosp_x86-eng

6. aosp_x86_64-eng

7. brilloemulator_arm64-eng

8. brilloemulator_arm-eng

9. brilloemulator_x86_64-eng

10. brilloemulator_x86-eng

11. edison-eng

12. mini_emulator_arm64-userdebug

13. m_e_arm-userdebug

14. mini_emulator_x86_64-userdebug

15. mini_emulator_x86-userdebug

16. brillo_gpios-userdebug

17. brillo_i2c-userdebug

18. brillo_leds-userdebug

19. ledflasher-userdebug

Which would you like? [aosp_arm-eng] 9

You could also run the “Brillo emulator” on ARM, and edison-eng must be the build for Intel Edison board. Now you can start the build:

make -j8

make -j8

It has to complete 21491 different tasks, […]

May 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Seeed Studio Introduces Automation and Wearable Kits for Intel Edison

Intel Edison is a $50 module with a dual core Atom processor @ 500Mhz and a single core Quark MCU @ 100 Mhz, Wi-Fi and Bluetooth 4.0, as well as headers for I/Os that’s destined to be used in wearables and IoT applications. Seeed Studio has now launched two kits for the Intel module for home automation and wearables. Grove Indoor Environment Kit for Intel Edison The automation kit comes in a small blue box with the following parts (Intel Edison and baseboard not included): 1x base shield v2 that plugs into Edison baseboard and allows Grove modules connections 11 grove modules – temperature & humidity, LCD RGB backlight, relay, moisture sensor, servo, light sensor, buzzer, UV sensor, PIR motion sensor, encoder and button. 2x 26 AWG Grove Cables 9V to barrel jack adapter 1x USB cables 1x User guide Programming is done with Edison Arduino IDE as explained in […]

March 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

TechNexion Introduces Intel Edison Compatible PICO-iMX6 SoM and DWARF Board

Intel Edison is a board made for wearables featuring an SoC with Intel Atom and Quark CPU cores. TechNexion, an embedded systems company based in Taiwan, has decided to make a mechanically and electrically compatible system-on-module featuring Frescale i.MX6 Solo or Duallite ARM Cortex A9 processor called PICO-iMX6. The company is also providing a PICO-DWARF baseboard that’s both compatible with PICO-iMX6 SoM and Edison board. DWARF stands for “Drones, Wearables, Appliances, Robotics and Fun”, so that pretty much explains what the platform is for. PICO-iMX6 System-on-Module Two version of the modules are available: PICO-iMX6-SD and PICO-iMX6-EMMC, the former with a micro SD slot for storage, and the latter a 4GB eMMC. Both share the followings specifications: SoC – Freescale i.MX6 Solo / Duallite single/dual core ARM Cortex A9 @ 1Ghz with Vivante GC880 3D GPU and Vivante GC320 2D GPU (Composition) System Memory – 512MB or 1GB DDR3 Storage – […]

October 17, 2014October 17, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Meet Blocks, a Tizen Modular Smartwatch based on Edison Board

If you like Phoneblocks / Project Ara module model concept, you may also be interested in Blocks, a modular smartwatch comprised of blocks connected via 3.5mm jacks. The watch is running Tizen on Edison development board powered by Intel dual-core Atom + Quark SoC, and part of the 10 finalists of Intel’s Make It Wearable challenge. Most smartwatches comes with a dumb” watchband, but with Blocks both the actual watch, and watchband are smart and customizable. You can change from round to square display, and add modules, which are part of the watchband, adding features like GPS, heat rate monitor, motion sensors, extra battery capacity, SIM card, contactless payment, temperature sensors, and so on. Each module also have a removable cover to let you change the color. One of the main drawbacks of current smartwatches is the battery life (1 to 2 days), so if it is possible to connect […]