display News - Page 33 of 34 - CNX Software

March 15, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cleo35 Touchscreen Display for Arduino UNO Comes with Tutorials and Example Projects (Crowdfunding)

There are already various options to add a (touscheen) display to Arduino board with software support including TFTLibrary for Arduino, and recently I tried Nextion serial touchscreen displays that are supported by a WYSIWYG editor, but the latter is only supported in Windows and not exactly user-friendly, and I found the few provided tutorials would only work with a specific resolution incompatible with the displays I had been sent. So I gave up on the idea of interfacing the display with Arduino or ESP8266 as it would be too time-consuming. FTDI CleO project might be faster and easier to get started, as their CleO35 touchscreen display for Arduino UNO will come with a 20 chapter tutorial covering over 80 topics, and 20 projects to get started. Some of the key features and specs of Cleo35 display include: MCU – FTDI FT903 32-bit FT32 core @ 100MHz with 256kB on-chip Flash […]

November 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

How to Use Nextion Serial Touchscreen Displays – Part 1: Standalone Mode

Itead Studio launched an Indiegogo campaign earlier this year for their Nextion TFT displays that can be connected to external board such as Arduino or Raspberry Pi via the serial interface, or even a standard computer provided you have a USB to TTL debug board. The campaign was successful with over 1,700 backers, and the company recently sent me two samples for review: a 2.4″ display and a 5″ display. In this post, I’ll look at the boards, and make a small standalone demo with Nextion Editor in Windows. Nextion NX3224T024 2.4″ Display The first item is a 2.4″ TFT display called NX3224T024_011N (non-touch) or NX3224T024_011R (Resistive touch) with 65536 color, 320×240 pixel resolution, LED backlight and up to 200nit brightness. It ships with a cable for the serial connection (5V, Tx, Rx, and GND). The back of the display features the serial connector, a micro SD used to load the […]

October 28, 2015October 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Low Cost 15.6″ Portable DVD Player Could Be Used as a Cheap Battery Powered HDMI Display

I’ve already written about portable displays with products such as Gechic On-Lap Monitors which sells for $200 and AOC USB Portable monitors are also popular, and somewhat cheaper than I expected at $120 and $199 for a 15.6″ display at respectively 1366×768 and 1920×1080 resolution, although if you live outside the US, shipping and import fees deposit bring the price much higher. A search for “portable display” on Aliexpress only showed some smaller 3.5 to 7″ displays, but I’ve been tipped about a 15.6″ portable DVD player selling for $114.53 on Chinavasion that could be used as an external display too thanks to its HDMI input. Specifications of this portable DVD player: SoC – Mediatek Solution Display – 15.6″ TFT LED Screen with 270 degree swivel; 1366×768 resolution; 16:9 aspect ratio Disc support – DVD, CD, EVD, VCD, CD-RW, DVD-R. Hitachi lens Video Output – AV Video Input – HDMI, […]

April 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nextion 2.4″ and 4.3″ UART TFT Displays Come with a Drag and Drop UI Editor (Crowdfunding)

You may want or need to add a small TFT display to control your devices, and it may not always be easy to interface with the hardware, and desiging the user interface may be time consuming. ITEAD Studio latest project, Nextion TFT HMI touchscreen displays, aims to simplify connection with a simple UART interface, and make UI design easier with their Nextion Editor that allows developers to create a user interface without coding. Two models are available: Nextion-2.4″ 2.4″ display with 320×240 resolution Refresh rate: 80 ms 4MB flash 4-pin UART interface Micro-SD card slot, GPU, resistive touch sensor. Dimensions – Board: 74.43 x 42.85 x 3.32 mm; display: 60.78 x 42.62 mm Power Consumption – Sleep: 20 mA; active: 90 mA Nextion-4.3″ 4.3″ display with 480×272 resolution Refresh rate: 20 ms 16MB flash 6-pin UART interface Micro SD card slot, GPU, RGB driver, RGB buffer, resistive touch sensor Dimensions […]

March 31, 2015March 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Connect a 9.7″ Retina Display (iPAD 3/4) to Your Computer via a DisplayPort Adapter

One way to connect an extra Retina (2048×1536) display to your computer is to purchase Adafruit Qualia 9.7″ DisplayPort Monitor for $224.95. But in case your budget is limited, you could combine an old iPAD 3/4 display with AbuseMark 2048×1536 LCD to DisplayPort Adapter for 3,500 JPY ($29 US). If you don’t have an old iPAD, or would rather not dismantle your “old”-but-still-useful iPAD, you could purchase LG LP097QX1-SPC1/2, LG LP097QX1-SPA1/2/V, or Samsung LTL097QL01-W01 LCD panels instead for about $80 on Amazon US (LP097QX1 / LTL097QL01). If you live in Japan, AbuseMark also ships a complete kit for 12,000 JPY. Key features listed for the board: Video Input – DisplayPort Display Connector – 51-pin 0.3mm pitch FPC connector STM32F103CB 32-bit Cortex M3 MCU with native USB for firmware update and power/brightness/etc control Dual TI TPS61187 WLED drivers Power – USB or 5V-powered (separate connector) / 1.35A total current draw. Buck […]

February 21, 2015February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Toucan-0700 HMI Panel Runs Linux or Android on Freescale i.MX6 Processors

TechNexion Toucan-0700 is an HMI (Human Machine Interface) panel based on Freescale i.MX6 modules and a baseboard following EDM standard for system-on-modules. The 7″ panel PC features the same EDM1-CF-IMX6 SoM used in Wandboard development boards, and runs various Linux distributions, as well as Android 4.3 or 4.4. Toucan-0700 specifications: SoC – Freescale i.MX6 Solo/Duallite Cortex A9 processor with Vivante GPUs (i.MX6 Dual/Quad on request) System Memory – 512MB (Solo), 1GB (Duallite) Storage – 4GB eMMC + micro SD slot Display – 7″ LCD display with LED backlight, 1024×600 resolution; 16M colors; 500 cd/m²; 4 points touchscreen Video Output – HDMI 1.4 for external display Connectivity – Gigabit Ethernet with POE function 802.3at, and optional WiFi 802.11 b/g/n + Bluetooth 4.0 (Broadcom BCM4330) USB – 1x USB 2.0 host port, 1x USB OTG 3.0 connector, 2x internal pin headers Serial – 1x RS-232 (galvanic isolated), 1x RS-232/422/485 (galvanic isolated), 2x […]

September 4, 2014October 16, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Samsung Unveils Galaxy Note 4 and Note Edge with Curved Display

IFA 2014 tradeshow is just starting today, and will last until the 9th of September, but several companies have made announcements just before the show. One of them is Samsung which announced Gear VR virtual reality kit, Tizen based Gear S smartwatch, as well as two new smarthones, Galaxy Note 4 and Note Edge, which will be the subject of this post. Samsung Galaxy Note Edge Galaxy Note Edge is much different from most other phones thanks to its curved display on one side of the phone. Other specifications: SoC – Qualcomm Snapdragon S805 quad core Krait 400 processor @ 2.7 GHz with Adreno 420 GPU System Memory – 3GB RAM Storage – 32 or 64 GB internal memory + micro SD slot (up to 64GB) Display – 5.6″ Quad HD+ Super AMOLED (2560 x 1440 + 160) Cellular Networking: 2.5G (GSM/ GPRS/ EDGE): 850 / 900 / 1800 / […]

January 28, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Display Solution U-See2 Dual-Sided Interactive Display

U-See2 is a dual-sided screen with a swivel arm that allows the system to operate either back-to-back, or in a side-by-side configuration. One of the sides features a touch screen to allow customer’s involvement. This product can be used in consumer or service centers such as travel agencies, banks, point-of-sale retail, doctor’s office, etc… Display Solution, the company behind the project, also explains that it can also be used for education in order to save space (one monitor and one table for 2 students), or at home for dual player gaming. The monitor can be operated in 2 modes: Clone (Mirror) Mode – The image on the primary monitor will duplicate on the second (“client”) monitor. Extended Mode – Extend the view to both monitors over USB and VGA / DVI adapter as configured under Windows. Amazingly the company does not mention screen size (it could be because they provide […]