display News - Page 31 of 34 - CNX Software

November 4, 2017November 6, 2017 by Jean-Luc Aufranc (CNXSoft) - 146 Comments

Giveaway Week – Nextion Enhanced 7″ Capacitive Display

My Nextion Enhanced NX8048K070 display will soon find a new home. The 7″ display comes with a capacitive touchscreen, an enclosure, and can work in standalone mode thanks to a built-in processor and a 8-pin FPC connector for I/Os, or connected to a micro-controller through a UART interface. I did a mini review of the display, mostly showing a teardown, and how to use Nextion Display Editor Windows-only tool to design your own user interface. The GPIOs are not really convenient to use with the required flat cable, and the company did not send me their $5 IO board, which would have made things easier. Learning curve may be a little sharper than needed as I’ve not found the Windows software to be very user-friendly, and documentation could be improved too. I’ll give the display with enclosure, micro USB power board, and UART cable as shown on the first photo. […]

October 20, 2017October 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Banana Pi M2 Magic Board Now Sold with Allwinner A33 Processor for $23

Banana Pi M2 Magic development board was first unveiled in February of this year with an Allwinner R16 SoC, 512 MB RAM, and 8GB eMMC flash, and its main selling points were support for MIPI DSI LCD displays, CSI cameras, and 3.7V LiPo batteries. AFAIK SinoVoIP never sold that version of the board, at least on Aliexpress. Possibly due to the intricacies of Allwinner business units, the company has now officially launched Banana Pi M2 Magic (aka BPI M2M), but replaced Allwinner R16 by the similar Allwinner A33 processor, and removed the 8GB eMMC flash to bring the price down to $23 plus shipping. The “old” Allwinner R16 based Banana Pi M2 Magic board will apparently be sold as M2 Magic Plus soon. Banana Pi BPI-M2 Magic (A33) specifications: SoC – Allwinner A33 quad core ARM Cortex-A7 processor with ARM Mali 400 MP2 GPU System Memory – 512MB DDR3 Storage […]

September 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

2.9″ ESPaper Lite Kit is a $40 ePaper Display Kit with an ESP8266 WiFi Module

Squix (Daniel Eichhorn) has designed a 2.9″ ESPaper Lite Kite is a battery powered kit based on a black and white ePaper module, and ESP-WROOM-02 module based on Espressif Systems ESP8266 WiSoC. 2.9″ ESPaper Lite Kit specifications: Wireless Module – ESP-WROOM-02 WiFi module with Espressif ESP8266 Display – 2.9″ B&W ePaper module with 296×128 pixels resolution connect over SPI to ESP8266 Debugging / Programming – 6-pin serial port header USB – 1x micro USB port for programming Misc – 3 buttons: Reset (wake up from deep sleep); S0 (flash/GPIO0); S1: user button connected to GPIO12; power switch; charging and (firmware) flashing LEDs Power – JST connector for LiPo battery; charging circuit You’ll need a 3.3V USB to TTL debug board for flashing the firmware to the board, and a LiPo battery to power it up. The solution is particularly useful if you want a battery powered display that is infrequently […]

September 15, 2017September 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

7″ LCD Display with HDMI input, Audio output Launched for Orange Pi (and Other) Boards

If you want a cheap and simple way to add a screen to your development board, there are some 7″ displays with HDMI inputs that costs under $30 shipped. But Shenzhen Xunlong has decided to make their own 7″ LCD display with HDMI input and audio output, and sell for $22 + shipping. The company only provided minimal technical information about the board and display: Display – 7″ TFT LCD with 1024×600 resolution Video & Audio Input – HDMI Audio Output – 3.5mm audio jack Power Supply – 5V via micro USB port If we look at a closer picture of the board, we’ll see they used Lontium LT8619B, but the company’s website is down… The board also features three different connectors for displays, so they probably have other displays planned. While the company claims the display is made for Orange Pi H3 boards, it should really work with any […]

July 20, 2017July 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Manga Screen 2 is Smartphone Touchscreen Display with USB and HDMI Ports for Makers (Crowdfunding)

Most touchscreen displays aimed to be connected to a development board work through a display interface such as MIPI DSI or LCD RGB (and USB or I2C for touch support), and come with somewhat low resolution such as 800×480 which can be suitable for HMI applications. They also often don’t work with all boards due to the different interfaces used, and there’s no way to easily connect such small display to your computer. Taking those limitations into account, and since most boards and computers come with HDMI and USB ports, Elias Bakken and his team have added HDMI and USB ports to two smartphone displays, and Manga Screen 2 was born. The two displays – made by Sharp – have the following hardware specifications: Big (5.9”) Small (4.8”) Resolution 1920×1080 1280×720 FPS (max) 60 57 Color mode 24-bit PPI 376.2 307.9 Brightness 400 cd/m2 500 cd/m2 Contrast ratio 1000:1 800:1 […]

June 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Diskio Pi 13.3″ Touch Panel Display Kit is Designed for Raspberry Pi and ODROID Boards (Crowdfunding)

If your project requires a touch panel, there are plenty of solutions for Raspberry Pi and ODROID boards, with Hardkernel even selling ODROID-VU8C fully integrated touch panel display. However, most display kits require you to make your own case, and feature smaller displays with lower resolution. One developer has however come up with Diskio Pi, a higher-end touch panel kit with a 13.3″ Full HD display that works with the most popular Raspberry Pi and ODROID boards. Diskio Pi specifications: Display – 13.3″ AUO TFT IPS display with 1920×1080 resolution connected via a 30-pin eDP connector ; 330 cd/m2 brightness; 85° viewing angles in all directions. Touch panel – 10-point capacitive touch; G/G structure; USB 2.0 interface; ≥6H surface hardness. Main board: HDMI to eDP driver Stereo sound amplifier USB 2.0 hub with 3x ports: 2x external + 1x internal Battery balance circuit (3S/3S2P) Expansion – Various headers for prototyping […]

June 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Mini Review of Nextion Enhanced NX8048K070 7″ Display with Enclosure for HMI Applications

I reviewed some Nextion touchscreen a while ago. Those were 2.4″ and 5″ serial TFT displays with optional resistive touch support that could be used in standalone mode, or connected to an MCU board over UART to control external hardware. The user interface could be designed and emulated in Windows based Nextion Editor program before uploading it to the display via UART or micro SD card. ITEAD Studio has recently launched Nextion Enhanced NX8048K070 family of 7″ displays with resistive or capacitive touch panels, and support for GPIOs. The company sent me the capacitive model with enclosure for evaluation, so I’ll have a quick look at the hardware and Nextion Editor in this mini review. Nextion Enhanced NX8048K070_011C Unboxing I received it in a package from “ITEAD intelligent solutions” with basic description with Model: NX8048L070_011C with enclosure Outside dimensions : 275 x 170 x 50 mm (That’s the package dimensions) […]

June 14, 2017June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

$10 Smartphone Display Released for Orange Pi 2G-IoT Board

Orange Pi 2G-IoT is a low cost ARM Linux board with 2G, and WiFi & Bluetooth connectivity, basically with the guts of a smartphone minus the display and battery. Shenzhen Xunlong has now released a 800×480 display with capacitive touch support for the board available in black or white, and selling for $9.98 plus shipping. The board is too thick to make a smartphone out of it, but it reminds of the very expensive Qualcomm MDP’s (Mobile Development Platform), so Android app developers may find some use to test their apps on lower end hardware. It could also be used for control panels that do not need to be very thin. Orange Pi 2G-IoT display specifications: 3.5″ TFT Display with 800×480 resolution Capacitive touchscreen Case with the Back, Home, and Recent buttons Dimensions – With case: 57.14 x 96.85 x 2.0 mm; Display only: 51.84 x 86.4mm Software support is […]