digital signage News - Page 23 of 30 - CNX Software

March 26, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Compulab CM-T54 Computer-on-Module Powered by Texas Instruments OMAP5432

CompuLab has introduced CM-T54 Computer-on-Module (CoM) powered by Texas Instruments OMAP5432 SoC with dual ARM Cortex-A15 CPU @ 1.5GHz coupled with Imagination Technologies PowerVR SGX544 GPU. The module also features up to up to 4GB DDR3, up-to 64GB eMMC, and provides Ethernet, SATA, USB 3.0 interfaces among others. Target applications include digital signage, industrial media players and IPTV. CM-T54 specifications: SoC – Texas Instruments OMAP5432 dual Cortex-A15 @ 1.5GHz with PowerVR SGX544 GPU, 2x Cortex M4 cores, IVA-HD video subsystem and TMS320DM64 32-bit DSP core System Memory – 512MB – 4GB DDR3-1066, single / dual-channel 32-bit data bus Storage – Up to 64GB eMMC flash, SATA II interface, 3.0 Gbps, Up to 3x MMC/SD/SDIO (3V levels) up to 32GB each. Display Parallel 24-bit display. Up to 1920×1080 @ 60Hz HDMI 1.4. Up to 1920×1080 @ 60Hz MIPI/DSI (4x lanes) @ 1Gbps Optional LVDS. Up to 1920×1080 @ 60Hz Support for […]

March 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

DATA MODUL mini-ITX Board Supports Freescale i.MX6 & Intel Bay Trail-I QSeven Modules

DATA MODUL, a specialist supplier of display technology, has recently unveiled eDM-mITX-CB-Q7-Info, a mini-ITX Baseboard for ARM & x86 Qseven modules optimized to drive large panels for digital signage applications. In theory, the board should support any Qseven modules, but for now only Data Modul’s Freescale i.MX6, and Congatec conga-QA3 Intel Atom E3800 series modules have been optimized and officially certified to work with the motherboard. Precisely, the board is optimized and certified for the following modules: DATA MODUL ARM Qseven SoMs: eDM-QMX6 (i.MX6Quad) eDM-DMX6 (i.MX6Dual) eDM-DLMX6 (i.MX6Dual lite) Congatec x86 Qseven SoMs: Conga-QA3 with Atom E3845 (Quad core) Conga-QA3 with Atom E382x (Dual core). Three models: Atom E3827, E3826 or E3825. Conga-QA3 with Atom E3815 (Single core) You may have heard about EDM, a competing module standard, previously, but the eDM prefix in the ARM modules or the mini-ITX board names has nothing to do with this standard, as […]

February 24, 2014February 24, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

VIA VAB-1000 Pico-ITX Board Features VIA Elite E1000 Dual Cortex A9 SoC, Targets Embedded Android and Linux

Via has introduced VAB-1000 Pico-ITX board at Embedded World 2014. This new embedded board features VIA Elite E1000 dual Cortex A9 SoC together with 2GB DDR3 SDRAM, 4GB eMMC Flash memory, and numerous I/Os. The board targets interactive kiosk, digital signage and HMI (Human Machine Interface) applications running Android or Linux. VIA VAB-1000 Specifications: SoC – VIA Elite E1000 dual core Cortex A9 SoC with unnamed 2D/3D GPU with Unified Shader Architecture featuring 64 stream processors System Memory – 2GB DRR3 Storage – 4GB eMMC + microSD slot Back panel I/O 2x HDMI connectors for HDMI-in and HDMI-out 2x mini-USB 2.0 port 1x MicroSD slot 1x Gigabit Ethernet port 1x DC-in Jack. Front panel I/O 1x pin header for two additional USB ports 1x pin header for SPI and 8-pin GPIO 1x pin header for three I2C and two COM ports 1x pin-header for front audio (Line-in/Line-Out/Mic-In). Internal I/O 1x […]

February 5, 2014August 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

BrightSign 4K Digital Signage Player Delivers 4K 10-bit HEVC Video Playback at 60 fps via HDMI 2.0

When you buy a media player advertized as supporting 4K (aka 2160p, 4K2K, or UHD), you have to read the fine print to find out what you really get. First on the market were media players capable of decoding 4K videos put outputting to 1080p60 maximum such as Mele M9, then we’ve been shown some media players such as Geniatech ATV1800, decoding 4K video using 2160p resolution (3840×2160) as expected, but with a framerate limited to 24 fps or 30 fps due to limitation of HDMI 1.4. However, if you want to experience 4K video with the maximum framerate (60 fps) or “True 4K”, you’ll need a player and a TV support HDMI 2.0 standard. There are not many players currently supporting 4K @ 60fps, but BrightSign 4K digital signage media player is one of them, and it also happens to support HEVC/H.265 video codec. The company did not disclose […]

January 22, 2014January 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Cisco Edge 340 Digital Media Player Targets Digital Signage & Business Applications

Most of the time I feature low cost (Chinese) media players in this blog, but today I’ve had a look at a media player at the other side of the market that targets business users with applications such as webcasting and video sharing, digital signage, and business IPTV. Cisco Edge 340 digital media player (DMP) comes in two flavors “Wireless” and “non-wireless”, and boast features such as PoE or RS-232 which are not often found in consumer devices. Cisco Edge 340 Specifications: SoC – Dual 1.60 GHz processor with integrated GPU @ 400MHz, most probably Intel Atom Z2560. It turns out it could be Intel Atom CE5335 instead. System Memory – 2GB DDR3 @ 800 MHz Storage – 32GB SSD (70MB/s write speed) and SD card slot Connectivity – 1x Ethernet 10/100/1000-Gbps port with PoE and PoE+ support. Wireless version only: Dual band Wi-Fi 802.11 b/g/n + Bluetooth 4.0 Video […]

November 20, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Gumstix Announces Solution Kits for their CPU Modules and Boards

Gumstix has recently unveiled several solution kits featuring their Overo and DuoVero Computer-on-Modules (CoMs), Pepper single board computer, and several expansions boards, together with required accessories, and software packages, in order to help their customers getting started more easily. All these solutions are based on Texas Instruments OMAP3, OMAP4, and/or Sitara processors, and run Linux (Ubuntu or Yocto), and sometimes Android for the kits with displays. The solutions kits target 6 different types of applications and/or markets: Robotics Robotic Development Kit (Pictured above) with one Overo AirSTORM CoM (OMAP3703), and RoboVero expansion board. The kit is better suited for motor control applications. Mobile Robotic Development Kit with one Overo AirSTORM CoM, and Turtlecore expansion board to be used with iRobot Create. The kits ship with a Linaro (Ubuntu for Overo) system card and Robot Operating System (ROS) pre-installed. Handhelds 3.5″ Handheld Development Kit featuring Overo AirSTORM CoM with Alto35 cutomizable […]

August 24, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Habey EMB-3700 Embedded Board Features AMD G-Series SoC

AMD recently announced their G-Series SoC family that combines a CPU, a GPU, and a controller hub into a single chip, as ARM has been doing for a while, and more products based on the platform are entering the marketplace. I’ve already written about Win Enterprises MB-60830 and Netboard A10 single board computers, and today I’ll introduce another option with Habey EMB-3700, a 3.5″ embedded board that targets applications such as digital signage, point-of-sale (PoS), industrial automation, machine to machine, in-vehicle telemetry, and medical technology. Habey EMB-3700 Specifications: SoC: GX-420CA quad core @ 2.0GHz (25W TDP) with Radeon HD8400E or GX-415GA quad core @ 1.5GHz (15W TDP) with Radeon HD8330E or GX-210HA dual core @ 1.0GHz (9W TDP) with Radeon HD810E System Memory – 1x 204-Pin DDR3 SODIMM, up to 4GB (ECC) RAM Storage – 2x 6Gb/s SATA 3.0 connectors Video Output: HDMI up to 1920 x 1200 VGA up […]

July 4, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$130 Giada Q11 Android PC Features an LVDS Port, a mini PCIe slot, a Battery and 2.5″ HDD Support

Giada Q11 is an Android media player powered by AllWinner A10 with 1GB RAM and 8GB flash, which are pretty low specifications by today’s standard, so I would probably not recommend using at home. However, it comes with some pretty rare ports and features: an LVDS port, a mini PCIe slot (for 3G module only), a COM port, and a 2200 mAh battery capable of driving displays. Those extra features could make it a pretty good solution for specific applications such as high definition digital signage players. If your setup does not support networking, and you need to store media files in the device, a 2.5″ for SATA hard drive is also available. Giada Q11 Specifications: SoC – Allwinner A10 Cortex A8 processor @ 1GHz + ARM Mali-400 GPU System memory – 1GB DDR3 Storage – 8GB NAND flash, micro SD card slot (up to 32GB), and SATA II (2.5″ […]