development kit News - Page 7 of 42 - CNX Software

October 3, 2020October 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mango-DVK OpenWrt Devkit Features 2.5GbE, WiFi 6 SoM powered by Qualcomm IPQ6000/IP6010 SoC

We’ve been covering some 802.11ax WiFI 6 embedded networking boards from Wallys Communications and Compex in the last few months, but 8devices has now entered the fray with Qualcomm IPQ6000/IPQ6010 powered Mango WiFi 6 system-in-module available in commercial or industrial temperature range, as well as as a development kit based on the module. Mango SoM supports dual-band 2×2 MiMo 802.11ax and multi-Gigabit Ethernet connectivity, features up to 2GB RAM, 256MB NAND flash, and runs OpenWrt Linux with target applications including routers, gateways, and access points. Mango SoM Specifications: SoC (one or the other) Qualcomm IPQ6000 quad-core Cortex-A53 processor @ up to 1.2 GHz with hardware NAT engine, HW crypto Qualcomm IPQ6010 quad-core Cortex-A53 processor @ up to 1.8 GHz with hardware NAT engine, HW crypto System Memory – 512MB DDR3L 512MB (up to 2GB) Storage – 32MB NOR FLASH, up to 256MB NAND flash Networking Wireless 2.4GHz 802.11 b/g/n/ac/ax WiFi […]

September 27, 2020August 13, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Lantronix Open-Q 865XR SoM Brings Snapdragon XR2 Processor Beyond Virtual Reality

Lantronix Snapdragon XR2 Development Kit

Qualcomm Snapdragon XR2 (SXR2130P) is the latest and most powerful virtual & extended reality processor from the company and Facebook recently announced it would be found in their Oculus Quest 2 standalone VR headset. But it now looks like the processor will be used well beyond virtual reality applications as Lantronix has unveiled a Snapdragon XR2 SoM with Open-Q 865XR system-on-module designed for AI boxes, video conference systems, multi-camera systems, machine vision platforms, advanced high-resolution multi-display systems, medical imaging, and handheld data collectors. Open-Q 865XR SoM Open-Q 865XR SoM specifications: SoC – Qualcomm SXR2130P (Snapdragon XR2) Octa-core processor with 1x Kryo Gold prime @ 2.84 GHz + 3x Kryo Gold @ 2.42 GHz + 4x Kryo Silver @ 1.81 GHz Adreno 650 GPU @ up to 587 MHz Hexagon 698 DSP with quad Hexagon Vector eXtensions Spectra 480 Image Signal Processor Adreno 665 Video Processing unit for decode up to […]

September 18, 2020September 21, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Microchip SAMD21 Machine Learning Evaluation Kits Work with Cartesiam, Edge Impulse and Motion Gestures Solutions

While it all started in the cloud Artificial Intelligence is now moving at the very edge is ultra-low power nodes, and Microchip has launched two SAMD21 Arm Cortex-M0+ machine learning evaluation kits that now work with AI/ML solutions from Cartesiam, Edge Impulse, and Motion Gestures. Bot machine learning evaluation kits come with SAMD21G18 Arm Cortex-M0+ 32-bit MCU, an on-board debugger (nEDBG), an ATECC608A CryptoAuthentication secure element, ATWINC1510 Wi-Fi network controller, as well as Microchip MCP9808 high accuracy temperature sensor and a light sensor. But EV45Y33A development kit is equipped with an add-on board featuring Bosch’s BMI160 low-power Inertial Measurement Unit (IMU), while EV18H79A features an add-on board with TDK InvenSense ICM-42688-P 6-axis MEMS. The photo above makes it clear both SAMD21 machine learning evaluation kits rely on the same baseboard with a MikroBus socket connected to either 6DOF IMU 2click or 6DOF IMU 14 click add-on board from MikroElektronika. Both […]

September 17, 2020September 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NXP i.MX 8M Plus AI Systems-on-Modules and Devkits Launched by Variscite

NXP i.MX 8M Plus processor was unveiled at the very beginning of the year as the first i.MX processor with AI hardware acceleration provided by a 2.3 TOPS Neural Processing Unit (NPU) embedded in the chip. Apart from the upcoming Wandboard 8MPLUS SBC, we had not seen hardware powered by the new processor, but Variscite has now announced two NXP i.MX 8M Plus systems-on-modules – VAR-SOM-MX8M-PLUS and DART-MX8M-PLUS – and corresponding development kits. VAR-SOM-MX8M-PLUS CPU Module & Development Kit Specifications: SoC – NXP i.MX 8M Plus single, dual or quad-core Cortex-A53 processor clocked at up to 1.6 (Industrial/Extended) or 1.8GHz (Commercial), Cortex-M7 real-time core @ 800 MHz, 1080p H265/H264 encode/decode, AI/ML acceleration up to 2.3 TOPS, GC7000UL 3D GPU, GC520L 2D GPU System Memory – 1 to 4GB LPDDR4 Storage – 8 to 64GB eMMC flash Networking – 802.11 ac/a/b/g/n + BT 4.2/BLE module SO-DIMM Edge Connector Storage I/F – […]

September 14, 2020September 14, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Silicon Labs Introduces Bluetooth 5.2 BGM220S SiP and BGM220P PCB Module

Silicon Labs has recently announced two hardware modules based on the company’s BG22 secure Bluetooth 5.2 SoC, namely BGM220S System-in-Package (SiP) measuring just 6x6mm, and BGM220P, a slightly larger PCB variant optimized for wireless performance along with a better link budget for greater range. Both modules can be integrated into products with up to 10-year battery life from a single coin cell. All BGM220S/P variants can support Bluetooth Direction Finding and some of the parts can also handle Bluetooth Mesh Low Power protocol. Silicon Labs BGM220S/P key features: Wireless SoC – Silicon Labs EFR32BG22 Arm Cortex-M33 with DSP instructions and floating-point unit, up to 512 kB Flash, 32 kB RAM, 2.4 GHz radio with TX power up to 8 dBm, and Embedded Trace Macrocell (ETM) for advanced debugging Supported Protocols Bluetooth Low Energy (Bluetooth 5.2) Direction-finding Bluetooth mesh Low Power Node Various MCU peripherals include ADC, up to 25x GPIOs, […]

September 5, 2020September 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

M5StickC PLUS ESP32-PICO Devkit Comes with 1.14-inch LCD, 120 mAh Battery and Buzzer

M5StickC PLUS ESP32-PICO DevKit Bluetooth and WiFi

Shortly after introducing the Core2 ESP32 IoT Development Kit with a 2-inch touch display, 390 mAh battery earlier this week, M5Stack has announced the availability of another ESP32 WiFi & Bluetooth IoT devkit, with the more compact M5StickC PLUS featuring a 1.14-inch display, a 120mAh battery, motion, sensor, a buzzer and the usual Grove connector for expansion. M5StickC PLUS is an upgrade to the original M5StickC that lacks the buzzer and features a smaller 0.96-inch display and a lower capacity 96 mAh battery. The new model can be purchased now for $13.95 plus shipping on Aliexpress, while the original device, that happens to be M5Stack top-selling product, is still available for $9.95. M5StickC PLUS key features and specifications: SiP – Espressif Systems ESP32-PICO-D4 system-in-package with ESP32 dual-core WiFI and Bluetooth IoT processor @ up to 240 MHz, 4MB SPI flash Display – 1.14-inch Color TFT LCD with 135×240 resolution (ST7789v2 […]

September 1, 2020September 1, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

M5Stack Launches Core2 ESP32 IoT Development Kit with 2-inch Touch Display

M5Stack has just launched an upgrade to its M5Stack Core development with M5Stack Core2 based on the same Espressif ESP32 WiFI + Bluetooth SoC, but adding capacitive touchscreen support to the 2-inch TFT LCD, as well as a motion sensor and a microphone. The new version also adds 8MB PSRAM, a larger 390 mAh battery, and targets IoT terminals for Smart Home, industrial automation or robotics, STEM Education, and DIY prototyping. M5Stack Core2 specifications: SoC – Espressif ESP32-D0WD-V3 dual-core Xtensa LX6 processor clocked at up to 240MHz with 520KB SRAM, Wi-Fi, and dual-mode Bluetooth connectivity External Memory – 8MB PSRAM Storage – 16MB flash storage, MicroSD card slot up to 16GB Display – 2-inch IPS LCD screen with 320×240 resolution (ILI9342C driver), and touchscreen support (via FT6336U controller) Audio – 1W speaker (1W-0928), SPM4123 microphone, NS4168 I2S power amplifier Antenna – 2.4GHz 3D antenna USB – 1x USB Type-C port […]

August 28, 2020August 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

RISC-V & ESP32 based TTGO Handheld T-WATCH K210 AIoT DevKit Works with a 9V Battery

TTGO Handheld T-WATCH-K210 RISC-V & ESP32 Devkit

LilyGO TTGO T-Watch K210 AIOT is a rather thick watch development kit based on Kendryte K210 RISC-V AI Processor and ESP32 WiSoC capable of performing AI workloads such as face detection using a USB power source. We first covered the development kit in June, and the company releases some small variants from time to time with the latest being TTGO Handheld T-Watch K210 with basically the same hardware, plus the addition of a handle that adds a power button, and a compartment for a 9V battery to power the watch/devkit. TTGO Handheld T-Watch K210 specifications: SoC – Kendryte K210 dual-core 64-bit RISC-V processor with 8MB RAM, AI accelerators Storage – 16MB flash, MicroSD card slot Display – 1.54-inch capacitive touch IPS screen connected over an 8080 interface Camera – Adjustable 2MP OV2640 sensor with 65-degree lens (optional 120-degree angle lens), AS312 “human” infrared sensor Connectivity – 2.4 GHz 802.11b/g/n WiFi […]