development kit News - Page 35 of 42 - CNX Software

June 4, 2013June 4, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Bsquare Announces Qualcomm Snapdragon 800 Series Mobile Development Platforms

BSQUARE has recently announced the availability of its Qualcomm Snapdragon 800 Mobile Development Platform (MDP), based on Qualcomm Snapdragon 8974 (LTE), which will be released both in tablet and smartphone form factor. This development platfom has been designed for application developers and device manufacturers so that they can develop, test, optimize and showcase apps in Android 4.2.2 powered by the latest Qualcomm SoCs. Snapdragon 800 Tablet and Smartphone MDP specifications: SoC – 8974 Quad Core Krait 400 Snapdragon Processor @ 2.3GHz with Adreno 330 embedded GPU and Hexagon v5 QDSP6 Memory and Storage – N/A, apparently you don’t need to know… Display: Tablet MDP – 11.6” 1080p HD Multitouch Display Smartphone MDP – 4.3” 720p HD Multi-touch display Video Playback – UltraHD/4K video support via HDMI output Camera – 12MP rear camera w/ Flash (1080p HD @ 30fps) & 2MP front facing camera (1080p HD @ 30fps) Audio – Surround sound […]

May 2, 2013May 2, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

VIA Unveils VAB-600 Pico-ITX Board Powered by WM8950 Processor

VIA Technologies has recently announced the VAB-600 Pico-ITX embedded board featuring WonderMedia WM8950 ARM Cortex A9 SoC clocked at 800MHz. VIA targets in-vehicle infotainment as well as mobile and healthcare applications for the board despite an operating temperature range between 0°C and 60°C. Here are the key features of this embedded board: SoC – Wondermedia WM8950 Cortex-A9 @ 800MHz + Mali-400 GPU System Memory – 1GB DDR3 SDRAM Storage – 4GB eMMC Flash memory + 512KB SPI Flash for Boot Loader + microSD slot Video Output – Mini HDMI, on-board DVO (Digital Video Output) for TTL or LVDS display Video Codecs – MPEG2 MP@HL, MPEG4, H.264 BP/MP/[email protected], VC-1 SP/MP/AP, VP8 and JPEG/MJPEG. USB – 2x mini USB 2.0 host ports Connectivity – 10/100M Ethernet (VT6113), 3G (SIM card slot) and optional WiFi support (VIA VNT9271B6050 WiFi module shared with one USB port) On-board Connectors: 2x COM connectors 1x RTC battery […]

April 16, 2013March 11, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Texas Instruments Announces Tiva Cortex M4 MCUs and $12.99 LaunchPad Evaluation Kit

Texas Instruments has just announced the Tiva ARM MCU platform, and specifically the Tiva C Series TM4C123x ARM Cortex-M4 MCUs, which are the first Cortex-M MCUs to be built on 65 nanometer flash process technology. The Tiva C Series TM4C123x MCUs, formerly known as Stellaris LM4F MCUs, are available now and target home, building and industrial automation. Key features and benefits of Tiva C Series MCUs: MCU Core – ARM Cortex-M4 floating-point core, operating at up to 80 MHz. Mixed-signal applications with high-performance analog integration – 2×12-bit ADC and 3 comparators.12-bit ADC accuracy is achievable at the full 1 MSPS rating without any hardware averaging. On-chip connectivity options – USB (host, device and On-The-Go), UARTs, I2C, SSI/SPI, CAN, etc.. Non-volatile storage of user interface or configuration parameters to reduce system cost – Thanks to integrated EEPROM. Low power – Standby currents as low as 1.6 uA. Large choice of MCU […]

April 12, 2013December 24, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

UDOO Single Board Computer Features Freescale i.MX6 Dual/Quad and Atmel SAM3 MCU

Have you ever dreamed of a single board with the power of 4 Raspberry Pi and Arduino Due functionality? This dream should soon become reality thanks to UDOO single board computer. This open source hardware board is powered by Freescale i.MX6 Dual or Quad with 1GB RAM, as well as Atmel SAM3 Cortex M3 MCU that provides access to Arduino compatible headers. Here are the specifications of the board: SoC – Freescale i.MX6 ARM Cortex-A9 CPU Dual/Quad Core @ 1GHz + Vivante GPU MCU – Atmel SAM3X8E ARM Cortex-M3 (same as Arduino Due) System Memory – 1GB DDR3 Storage – micro SD (boot device) + SATA (i.MX6 Quad only) Video Output – HDMI and LVDS + Touch (I2C signals) Audio I/O – Analog Audio and Mic Expansion Headers – 54 Digital I/O + Analog Input (Arduino-compatible R3 1.0 pinout) Connectivity Ethernet RJ45 (10/100/1000 MBit) WiFi Module USB – mini USB […]

April 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Kontron Unveils SMARC Starterkit for ARM Systems-on-Module

You may have previously heard about ULP-COM (Ultra Low Power CoM), a standard for systems and computers on module. The standard has been ratified by the Standardization Group for Embedded Technologies (SGET) in February 2013, and renamed to SMARC (Smart Mobility ARChitecture). This standard is specifically designed for low power designed, and is currently only used with ARM SoC. Kontron was involved in the design of this standard, released several ULP-COM, now SMARC, compatible CoM based on TI, Freescale and Nvidia SoC, and yesterday the company just announced SMARC Starterkit will all hardware and software components needed to get started with evaluation and development. This starter kit comes in a carrying case with the following items: SMARC Evaluation Carrier Board 7″ Display PM070W4 (WVGA – 800×480) Touch USB Kit ETP04USBR Mounting Kit Adapter and Cables: 1x Kontron LVDS Jili30 Adapter incl. cable 1x DSUB9 1x micro USB USB A Storage […]

March 24, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

IO Technologies Announces $29.99 Baseboard for Cubieboard

The Cubieboard is a low cost development board powered by AllWinner A10 with 512MB/1GB RAM, 4GB NAND and lots of interfaces. However some of processor interfaces are only available via the extension headers, and access to interfaces like VGA and LVDS would normally require some (minor) hardware hacking. That’s why George Ioakimedes (IO Technologies LLC) has decided to design and manufacture a carrier board (baseboard) for the Cubieboard. The Cubie baseboard provides the following: 2mm pitch female sockets to insert the Cubieboard All 96 Cubieboard pins brought out to 0.100″ (2.56mm) pitch headers 4-pin power header to match optional power input header on Cubieboard LVDS header with separate LCD Backlight connector to match low cost LVDS cable 4-wire touch screen connector Standard 2.5mm DC jack, 12V-18V input Onboard 5.0V switching regulator to power the Cubieboard and provide 3A (available on 0.100″ header) Onboard 3.3V switching regulator to power LCD and […]

March 20, 2013March 20, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Are You a Student? You Could Win a Toradex Colibri NVIDIA Tegra Kit and Up to $20,000

Toradex has launched the “Embedded Design Challenge”, a global design challenge for students and enthusiasts with a background in Research & Education. All you have to do is to submit your proposal, and if it is selected you’ll receive a free Toradex Colibri NVIDIA Tegra Kit (worth 250 USD) to realize your project. Toradex did not mention whether the kit is based on their Tegra 2 or Tegra 3 modules, but I assume they’ll provide “Toradex Colibri NVIDIA Tegra Kit” composed of Colibri T20 CoM (Tegra 2 + 256 or 512 MB RAM+ 512 MB / 1 GB Flash) and the Iris carrier board. This kit can run either Windows Embedded Compact 7 or Linux. You can find more information about the kit and associated resources on a previous post. To apply, you’ll need a resume (PDF), a proof of your enrollment with an educational institution (e.g. copy of your […]

March 19, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

iWave Systems Launches RainboW-G12M-Q7 SoMs Powered by TI Sitara AM389x/DM816x Processor

iWave Systems, an embedded systems company based in Bangalore, India, has unveiled new Qseven Modules powered by Texas Instruments Sitara AM389x/DM816x ARM Cortex-A8 microprocessor clocked up to 1.5 GHz. Rainbow-G12M-Q7 modules target applications such as Single-Board computers, network and communication processing, industrial automation, human machine interface (HMI), medical electronic devices, video surveillance systems and interactive Point-of-Service (PoS) kiosks. Here are the modules specifications: CPU – TI AM389x/DM8168 ARM Cortex-A8 based Sitara Processor operating up to 1.5 GHz Memory: 1GB DDR3 SDRAM 128 MB NAND Flash On-Board Micro SD slot 230-pin Qseven Edge Connector: 1x PCIe v2.0 1x HDMI 1.3 2x SATA LVDS channel 1 x USB 2.0 Host | 1x USB 2.0 device I2S Port SD/SDIO SPI & I2C ports Expansion Connector: Gigabit Ethernet HD Video IN/OUT Ports Analog Video OUT Audio IN/OUT ports UART, GPIOs Form factor – Qseven R1.20 compatible (70mm x 70mm) Temperature Range – 0 to […]