development kit

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Tessel ARM Cortex-M3 MCU Board Brings Hardware Hacking to Web Developers with JavaScript and Node.js

Tessel ARM Cortex-M3 MCU Board Brings Hardware Hacking to Web Developers with JavaScript and Node.js

People who are proficient with JavaScript or web technologies may not be completely comfortable with programming MCU in assembler and/or C programming language. Node.js, written in JavaScript, seems to be quite popular this days for diverse projects, but technical.io has decided to design a board called Tessel, powered by a Cortex M3 MCU. that can be fully programmed with JavaScript/Node.js. Tessel hardware specifications: MCU – NXP LPC1830 ARM Cortex-M3 @ 180mhz System Memory – 32MB SDRAM Storage – 32MB Flash Connectivity – Wi-Fi via TI CC3000 Expansion – 16-pin GPIO bank for prototyping Power – Micro USB or battery The board is said to be compatible with 1000’s of Node.js modules from NPM, can be programmed via USB or Wi-Fi using your own IDE, and support Tessel modules, as well as Arduino Shields. There are two (price) classes for Tessel modules: Class A: Relay — turn devices on and off (up […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 23 Comments on SolidRun Announces Cubox-i Platform with Freescale i.MX6 for as low as $45

SolidRun Announces Cubox-i Platform with Freescale i.MX6 for as low as $45

SolidRun has been providing tiny development platform such as Cubox and Cubox Pro featuring Marvell ARM compatible processors. However, the price of those platforms are well over $100, so the company decided to provide lower cost development platforms (Cubox-i) based on Freescale i.MX6 Solo/Dual Lite/Dual/Quad that sells for $45 and up. There are four versions: Cubox-i1 – Freescale i.MX6 Solo, 512 MB RAM, 10/100M Ethernet, optional Wi-Fi/Bluetooth module. Price: $44.99 Cubox-i2 – Freescale i.MX6 Duallite, 1GB RAM, 10/100M Ethernet, optional Wi-Fi Bluetooth module. Price: $69.99 Cubox-i2Ultra – Freescale i.MX6 Dual, 1GB RAM,  Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $94.99 Cubox-i4Pro – Freescale i.MX6 Quad, 2GB RAM, Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $119.99 The devices measure 55mm x 55mm x 42mm. The full specifications are better seen in the comparison table found in SolidRun website. The 4 models all boot […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on $249 Terasic SoCKit Development Kit Features Altera Cyclone V SX Dual Core A9 + FPGA SoC

$249 Terasic SoCKit Development Kit Features Altera Cyclone V SX Dual Core A9 + FPGA SoC

There seems to be a lot a development going on around dual core A9 + FPGA SoCs from Xilinx or Altera these days, and Terasic has recently announced SoCKit, a development board based on Altera Cyclone V SX SoC with 2GB RAM (1GB for ARM cores, 1GB for FPGA), 110K logic elements, etc… Here are the specifications listed on Terasic website: FPGA Device – Cyclone V SX SoC—5CSXFC6D6F31C8NES: 110K LEs, 41509 ALMs 5140 M10K memory blocks 6 FPGA PLLs and 3 HPS PLLs 2 Hard Memory Controllers 3.125G Transceivers ARM-based hard processor system (HPS) @ 800 MHz, Dual-Core ARM Cortex-A9 MPCore Processor with 512 KB of shared L2 cache, 64 KB of scratch RAM,  Multiport SDRAM controller (DDR2, DDR3, LPDDR1, and LPDDR2), and  8-channel direct memory access (DMA) controller Configuration and Debug: Quad Serial Configuration device – EPCQ256 for FPGA On-Board USB Blaster II (micro USB type B connector) Memory […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Lantronix Unveils xPico Wi-Fi Module For the Internet of Things

Lantronix Unveils xPico Wi-Fi Module For the Internet of Things

With Texas Instruments SimpleLink Wi-Fi CC3000 and Qualcomm Atheros AR4100P embedded Wi-Fi processors that fully handle Wi-Fi internally, and transfer data to an MCU with an SPI interface, and solutions such as Electric Imp, there are already ways to add Wi-Fi at relatively low cost to appliances. There’s now another solution available on the market with Lantronix xPico Wi-Fi Module. Listed features and specification of xPico Wi-Fi: SoC – ARM Cortex M3 class processor with 1MB on-chip Flash and 128 KB SRAM Storage – SPI Flash storage Wireless LAN Interface IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only) IEEE 802.11 d/h/i/j/k/w/r WPS 2.0 support u.FL connector for external antenna Serial Interface Two Serial CMOS Ports (3.3V, 5V tolerant) 300 to 921.6 Kbps Flow control XON/XOFF, RTS/CTS (SPort 1 only) Lantronix tunneling application (SPort 1 only) Host Interface –  Dual Serial Port, SPI, USB 2.0 (device), […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Emcraft Systems Announces Freescale Vybrid VF6 SoM With Cortex A5 CPU and Cortex M4 MCU

Emcraft Systems Announces Freescale Vybrid VF6 SoM With Cortex A5 CPU and Cortex M4 MCU

Emcraft Systems has recently announced Vybrid VF6 SoM, a System-on-Module powered by Freescale Vybrid VF6 dual core Cortex A5/Cortex M4 SoC with 128MB DDR3, and 512MB Flash, as well as a starter kit composed of VF6 SoM and a carrier board. Emcraft VF6 System-on-Module specifications: SoC – Freescale Vybrid VF6 dual-core microprocessor with the ARM Cortex-A5 (up to 500 MHz) and Cortex-M4 cores (up to 167 MHz). Either MVF61NN151CMK50 (No Security), or MVF61NS151CMK50 (with Security). System Memory – 128 MBytes DDR3 SDRAM; Storage – Up to 512 MBytes NAND Flash, 32 MBytes dual QSPI Flash; Connectivity – Two 10/100 Ethernet interfaces with L2 switch; External interfaces using two 80-pin 0.4 mm-pitch connectors: Two USB 2.0 OTG interfaces Serial console interface at the UART CMOS levels; JTAG interface to the Vybrid VF6 TFT LCD interface Synchronous audio interface (SAI) supporting I2S, AC97 and CODEC/DSP interfaces Multiple serial digital (UART, SPI, I2C, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Enter Wearable Tech Innovation World Cup 2013 for Cash Prizes and Free Development Kits

Enter Wearable Tech Innovation World Cup 2013 for Cash Prizes and Free Development Kits

The Wearable Technologies Innovation World Cup is a yearly competition open worldwide, with prizes worth a total of $200,000, “designed to inspire and stimulate excellent next generation solutions with the potential to become real marketable products for Wearable Technologies on the subjects Sports & Fitness, Healthcare & Wellness, Security & Prevention, Gaming & Lifestyle”. This year, the contest is open between June 1, 2013 and  November 30, 2013, and the good news is that even if you don’t win a cash prize, you can still purchase relevant devkit at a discount, or even get them for free. There are 3 companies involved who participate in the program from which you can get development kits: ST Microelectronics: STEVAL-IDB001V1(100% discount for the first 100 registrants) – STEVAL-IDB001V1 is a demonstration board based on STBLC01 low power Bluetooth low energy (BLE) controller and powered by STM32L MCU. Regular price: $159. STEVAL-MKI119V1 (No discount) – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Atmel SAM D20 MCU Family Features ARM Cortex M0+ Core

Atmel SAM D20 MCU Family Features ARM Cortex M0+ Core

Atmel has just announced its SAM D20 family of embedded Flash micro-controllers based on ARM Cortex-M0+ processor core, designed for low power applications such as home automation, consumer, smart metering and industrial applications. The key features of Atmel SAM D20 MCUs are as follows: Cortex M0+ @ 48MHz, 2.14 Coremark/MHz Single-cycle IO access, supporting a pin toggling frequency up to 24 MHz Eight-channel event system Peripherals: Four to six serial communication modules (SERCOM) configurable as UART/USART, SPI or I2C Up to eight 16-bit Timer/Counters Peripheral touch controller (PTC) that supports up to 256 channels and supports buttons, sliders, wheels, and proximity Real Time Clock (RTC) and calendar with leap year correction 12-bit 350ksps ADC and 10-bit DAC Power Consumption: <150µA/MHz <2µA RAM retention and RTC Options between internal and external oscillators and on-the-fly clock switching The family supports features 14 new devices available in 32-, 48- and 64-pin package options […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Texas Instruments Introduces SimpleLink Wi-Fi CC3000 BoosterPack

Texas Instruments Introduces SimpleLink Wi-Fi CC3000 BoosterPack

Texas Instrument launched SimpleLink Wi-Fi CC3000 in Q1 2012 in order to bring WiFi connectivity to any device including 8-bit or 16-bit MCU, as CC3300 internally handled all networking tasks, and exchange data with the MCU via an SPI interface. This Wi-Fi processor allows to use Wi-Fi for data transmission for the Internet of Things, and offers much better battery than other system relying on software to handle network traffic. Today, the company has just announced SimpleLink Wi-Fi CC3000 BoosterPack, a low cost evaluation platform that works with both MSP430 and Tiva C Series LaunchPad evaluation kits, and sells for $35. SimpleLink Wi-Fi CC3000 BoosterPack features and benefits as seen in the press release: SmartConfig technology: One-step Wi-Fi configuration using smartphones, tablets or PCs Easy network setup for display-less (headless) devices Simultaneous multiple device provisioning iOS, Android and Java sample applications available Royalty-free software Flexible memory size – Small memory foot print […]

Exit mobile version
UP 7000 x86 SBC