development kit News - Page 29 of 42 - CNX Software

June 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Cypress PSoC 4100/4200 (ARM Cortex M0) Prototyping Kits Sell for $4

I just wrote about Cypress Semiconductor PSoC 4 ARM Cortex M0 MCUs last week, as well as their $25 PSoC 4 pioneer development board. I’ve just found out there are cheaper, albeit very basic, evaluation boards called PSoC 4100 Prototyping Kit (CY8CKIT-049-41xx) and PSoC 4200 Prototyping Kit (CY8CKIT-049-42xx) that sell for only $4. PSoC 4×000 boards specifications: MCU PSoC 4100 ARM Cortex M0 MCU @ 24 MHz with up to 32 kB of flash, Up to 4 kB of SRAM PSoC 4200 ARM Cortex M0 MCU @ 48 MHz with up to 32 kB of flash, Up to 4 kB of SRAM USB – USB port using CY7C65211 USB-serial controller for PC connectivity and serial interfaces such as USB-UART, USB-I2C, USB-SPI, and USB-GPIO Onboard CMOD capacitors to enable CapSense development A bypass capacitor to ensure the high quality ADC conversions Prototyping – Breadboard compatible through holes for access to power, GPIOs, UART, USB etc… Misc – User and power […]

June 5, 2014June 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MediaTek Unveils LinkIt Platform with MT2502 Aster SoC for Wearables and IoT Applications

After Ineda Systems Dhanush SoC and SHASTRA Devkit, here’s another Wearable SoC and development kit for today with Mediatek announcement of their LinkIt platform providing both hardware and software to develop wearables and IoT applications using their Aster SoC for wearables. Key features of LinkIt platform listed on Mediatek Labs: MediaTek Aster (MT2502) measures only 5.4 x 6.2mm and is specifically designed for wearable devices Developer platform supported by reference designs that enable creation of various form factors, functionalities and internet connected services Synergies between microprocessor unit and communication modules, facilitating development and saving time in new device creation Modularity in software architecture provides developers with high degree of flexibility Supports over-the-air (OTA) updates for apps, algorithms and drivers Plug-in software development kit (SDK) for Arduino and VisualStudio; planned (Q4 2014) support for Eclipse Hardware Development Kit (HDK) based on LinkIt board by third party No details have been provided for […]

June 4, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Get Cypress PSoC 4 MCUs for $1 Delivered to Your Door by Fedex

How many times have you found a low cost MCU, or a development kit, ready to order, until shipping fees, sometimes several times the price of the item, curbed your enthusiasm, to the point you just decided to cancel your purchase? It happened to me several times, so I was pleased to find out Cypress Semiconductor will ship their PSoC 4 MCUs via Fedex anywhere in the world without actually charging for shipping. PSoC 4 are ARM Cortex M0 MCUs with up to 32 kB Flash, up to 4 kB SRAM, and analog and digital I/Os. CY8CKIT-042 PSoC 4 Pionner Kit is the corresponding kit development kit, which happened to be voted product of the year 2013 on Element14 community beating the BeagleBone Black, Freescale SABRELite, and PiFace Digital for the Raspberry Pi. Development can be performed using PSoC Creator, and there seems to be a developer community active enough to provide 100 projects in 100 days. So […]

May 31, 2014May 31, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Intel Unveils In-Vehicle Solutions and Development Kit for Assisted Driving and Autonomous Cars

Intel has announced their In-Vehicle Solutions (IIVS) for automakers comprised of hardware based on Intel’s industrial Bay Trail Atom 3800 series SoC, and software solutions relying on a Linux based operating system but it’s not clear whether it might be Wind River Linux, Tizen IVI, or another new OS. The solutions will first provide In Vehicle Infotainment (IVI) with assisted driving features such as , and over time it will allow semi-autonomous and self-driving cards. At the heart of the system, Intel will provide CM1050 computer-on-module that will be part of a development kit including a chassis with CAN, Ethernet, and USB ports, as well as audio and CVBS multimedia I/Os, and radios and antennas for FM, AM, DAB, GPS, WiFi, Bluetooth, and cellular. A Blu-ray drive, and SSDs will be available as storage options. The complete system is designed to be upgradeable, and automakers can expected modules with faster […]

May 15, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Boardcon EM4412 SBC Powered by Exynos 4412 SoC Targets Embedded & Industrial Applications

Boardcon Technology Limited, a Shenzhen based ODM specializing in industrial boards and modules, has announced their EM4412 single board computer featuring MINI4412 core board powered by Samsung Exynos 4412 quad core Cortex A9 SoC a few months ago. The board, with ports such as CAN, RS-485, and a DB9 RS-232 connector, appears to have been designed with industrial applications in mind, such as point-of-sales (PoS), slot machines, car-mounted systems, factory automation, traffic management, and more. Boardcon EM4412 specifications: SoC – Samsung Exynos 4412 quad core Cortex A9 cores @ up to 1.6GHz and ARM Mali-400MP4 GPU System Memory – 2GB DDR3 RAM Storage – 4GB eMMC flash + mini? / micro SD card slot Display HDMI 1.4 – Up to 1080p30 24-bit RGB parallel LCD interface Optional 4.3″, 7″, or 10.1″ch resistive or capacitive touchscreen Camera interfaces: MIPI-CSI slave (mipi2L CH) Optional 2x camera interfaces supporting ITU 601/656 I/F up […]

May 13, 2014May 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Compulab Introduces $75 CM-QS600 Computer-on-Module Powered by Qualcomm Snapdragon 600 SoC

CompuLab has just announced their CM-QS600 Computer-on-Module (CoM) powered by Qualcomm Snapdragon APQ8064 quad-core SoC with up to 2GB DDR3 RAM, up 32GB of on-board eMMC, dual-band WiFi 802.11, Bluetooth 4.0, and Gigabit Ethernet network connectivity, as well as PCIe, USB, SATA, HDMI, LVDS, serial ports and I/O lines. CM-QS600 targets multimedia applications such as digital signage, IPTV and media players requiring low power, and a small form factor. Compulab CM-QS600 specifications: SoC – Qualcomm Snapdragon APQ8064 quad core Krait 300 processor @ 1.7GHz with Adreno 320 GPU and Hexagon QDSP6 DSP System Memory – Up to 2GB DDR3 Storage – Up to 32GB on-board eMMC, SATA interface (via connector) Display HDMI 1.4a, up-to 1920 x 1080 LVDS, up-to 2048 x 1536 Audio – Audio codec with stereo line-out, line-in, mic Camera – MIPI-CSI, up-to 20MP Connectivity – Gigabit Ethernet, Dual-band WiFi 802.11a/b/g/n, Bluetooth 4.0 low-energy Other I/Os PCI Express […]

May 13, 2014May 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

GainSpan Introduces Full HD Video Application Development Kit for Wi-Fi IP Video Streaming Applications

GainSpan, a company providing low-power Wi-Fi solutions for the Internet of Things, and GEO Semiconductor, a semiconductor and software company specializing in camera and video solutions, have recently announced a Full HD resolution Video Application Development Kit (ADK) targeted at Wi-Fi video streaming applications in the surveillance, security and automotive markets such as battery or line powered IP cloud cameras, door bell cameras, baby monitors, toy cameras and automotive backup/drive recorder cameras The development kit features GainSpan GS2011MIZ low power IEEE 802.11b/g/n module, and GEO Semi MAX64380 1080p30 H.264 Camera CODEC, as well as MAXIM MAX9860 mono audio codec, and MAX98300 Class D amplifier. GainSpan Full HD Video ADK (GS-ADK-VideoGeo1080p) key features include: GS2011MIZ module with low power IEEE 802.11b/g/n compliant module with PHY rates up to 72 Mpbs. Supports Limited AP, Wi-Fi Direct with concurrent mode, WPS2.0. Wi-Fi Security – 802.11i, WPA/2, Personal and Enterprise, legacy WEP, TLS Full […]

May 6, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ARM Based COM Express Modules by MEN Mikro Electronik and Pactron

A few days ago, in a post listing different system-on-module (SoM) standards, I mentioned COM Express standard was targeting SoMs based on x86 processors, and SMARC was the equivalent for ARM. I still understand it’s the case as COM Express standard defines mechanical dimensions that are usually larger than SoM standard for low power processors, some buses found in ARM and x86 are different (e.g. AFAIK LPC and PCI are not found in ARM SoC), and the standard supports high power signals which are not needed in ARM or MIPS processors. Having said that, I’ve been pointed out to two ARM based COM Express modules, which could make sense if you want to use an ARM based module using existing COM Express compatible baseboards. The COM Express modules below feature Freescale i.MX6 and Marvell Armada XP SoCs, and have been designed respectively by MEN Mikro Electronik and Pactron. MEN Mikro […]