development kit News - Page 21 of 42 - CNX Software

December 4, 2015October 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Cypress Unveils a $49 Solar Powered IoT Development Kit with Bluetooth LE Connectivity

Cypress Semiconductors has recently launched a Solar powered IoT device kit, with the easy-to-remember codename S6SAE101A00SA1002, featuring the company’s CYBLE-022001-00 Bluetooth Smart module, and S6AE101A energy harvesting power management IC (PMIC) on the main board, as well as all accessories such as a small solar panel, a BLE-USB bridge, and all necessary components and cables. Target applications include battery-less wireless sensor node (WSN), IoT device that monitors various sensors, BLE Beacon, wearable device, building energy management system (BEMS), Home EMS, Factory EMSystem, wireless lighting control,wireless HVAC sensor and security system. The main features of the Energy harvesting motherboard include: Cypress CYBLE-022001-00 Bluetooth Smart module with ARM Cortex-M0 @ 48MHz, 128 KB flash, 16KB SRAM Cypress S6AE101A energy harvesting PMIC Sensor – Temperature & humidity sensor USB – 1x USB port for programming and debugging Debugging – SWD (serial Wire Debug) connector, JTAG header for USB-BLE Expansion – Sensor expansion connector […]

December 3, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

iWave Systems iW-RainboW-G20M-Q7 SoM Features Renesas RZ/G1M Cortex A15 SoC

iWave Systems has unveiled a new Qseven 2.0 compliant system-on-module part of their RainboW family with iW-RainboW-G20M-Q7 module powered by Renesas RZ/G1M dual core ARM Cortex A15 SoC, and targeting industrial and automotive applications with over 10 years of support. iW-RainboW-G20M-Q7 module specifications: SoC – Renesas RZ/G1M dual core ARM Cortex A15 @ 1.5GHz with PowerVR SGX544MP2 GPU @ 520MHz System Memory – 1GB DDR3(expandable) Storage – 4GB eMMC Flash (expandable) + 2MB SPI NOR Flash for boot code, and optional Micro SD Slot Connectivity – 1x Gigabit Ethernet PHY USB – 2 Port USB HUB I/Os via 230-pin Qseven edge connector: Storage – 1x SATA , 1x SDHC USB – 1x USB3.0 host, 2x USB 2.0 hosts, or 1x USB 2.0 device Display – 1x LVDS Connectivity – 1x Gigabit Ethernet Audio – 1x I2S Audio 2x PWM, 2x I2C, SPI, CAN, UART, GPIOs 1x PCIe (multiplexed with SATA) JTAG or […]

December 2, 2015December 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 32 Comments

LattePanda is a $79 Arduino Compatible Intel Atom x5 Board Running Windows 10 (Crowdfunding)

I feel like I’m living in another world after writing a title combining Arduino, Intel and Windows 10, but that’s exactly what LattePanda is promising with a development board featuring both an Intel Atom x5-Z8300 processor and an Atmel AVR MCU, and Windows 10 as the operating system. LattePanda board specifications: SoC – Intel Atom x5-Z8300 “Cherry Trail” quad core processor @ 1.44 GHz (Burst frequency: 1.84 GHz) with Intel Gen8 HD graphics @ 500 MHz System Memory – 2 to 4 GB DDR3L Storage – 32 or 64 GB eMMC, micro SD slot MCU – Atmel Atmega32u4 micro-controller Video Output / Display – HDMI, and MIPID DSI connector Audio I/O – HDMI, 3.5mm audio port Connectivity – Ethernet, WiFi and Bluetooth 4.0 USB – 1x USB 3.0 port, 2x USB 2.0 host ports, 1x micro USB port for power Serial – 1x from Intel SoC, 1x from Atmel MCU […]

December 2, 2015December 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Thunderboard Wear is a $75 Smartwatch Development Board by Silicon Labs

A few days ago I watched an ARMDevices.net’s video about an ARM’s smartwatch reference design running mbed OS 3.0, powered by a Silicon Labs EFM32 Giant Gecko Cortex M3 MCU, and promising up to 2 months battery life on a 160 mAh battery. While I could not find the full details about the reference design, I noticed Silicon Labs also launched a development board called Thunderboard Wear, based on the same platform, just quite bigger, and still wearable… (Sort of) Thunderboard Wear specifications: MCU – Silicon Labs EFM32GG995F1024 ARM Cortex-M3 MCU up to 48 MHz with 128 kB RAM,1 MB Flash External Memory – 256 kB external SRAM External Storage – micro SD card slot Display – 128×128 pixel Memory LCD from Sharp Connectivity – Bluetooth 4.1 smart module (Silicon Labs BGM111), upgradeable to Bluetooth 4.2 Sensors Ambient Light Sensing (ALS) and Proximity/Gesture via Silicon Labs Si1141. Optical hear-rate monitoring […]

December 1, 2015November 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Mediatek LinkIt Smart 7688 and Smart 7688 DUO Boards Run OpenWRT for IoT Applications

MediaTek LinkIt is a collection of development platforms designed for the prototyping of wearables and Internet of Things (IoT) devices, and last year they started with LinkIt ONE board based on Mediatek MT2501 “Aster” micro-controller and featuring WiFi, Bluetooth, GPSD and GSM/GPRS connectivity. Mediatek Labs has now launched two new LinkIt board, namely LinkIt Smart 7688 and LinkIt Smart 7688 DUO, both powered by Mediatek MT7688 MIPS processor and running OpenWRT, with the latter also adding an Atmel ATmega32U4 for Arduino compatibility. LinkIt Smart 7688 Board LinkIt Smart 7688 is then the simpler of the two with the following specifications: Processor – Mediatek MT7688AN MIPS24KEc processor @ 580 MHz with WiFi System Memory – 128MB DDR2 RAM. Storage – 32MB flash + micro SD slot Connectivity – 1T1R Wi-Fi 802.11 b/g/n with chip antenna and I-PEX conector USB – 1x micro USB host port, 1x micro USB port for power […]

November 27, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Graperain Introduces G8916 Qualcomm Snapdragon 410 SoM and LTE Mobile Development Board

Qualcomm applications processors used to be found mostly in consumer devices like smartphones and tablets, but recently the company has expended their use to the embedded space, and for example, we’ve seen Snapdragon 410 64-bit ARM processor used in DragonBoard 410c board, Intrinsyc Open-Q 410 SoM, Inforce 6309 SBC, and today I’m going to have a look at Graperain G8916 system-on-module that’s also integrated into a 4G/LTE mobile development platform. G6916 CPU module specifications: SoC – Qualcomm Snapdragon 410 (MSM8916) quad core Cortex A53 processor @up to 1.4GHz with Adreno 306 GPU System Memory – 1GB DDR3 (2GB optional) Storage – 8GB eMMC 4.5 flash (16 and 32GB optional) + micro SD support up to 128GB via I/Os Connectivity – 802.11 b/g/n WiFi, Bluetooth 4.0 LE, FM, NFC/RFID, GPS/GLONASS with 4x on-module antenna connectors. Cellular Connectivity TD-LTE – B38/B39/B40/B41; FDD-LTE – B1/B2/B5/B/B26 TD-SCDMA -B34/B39 GSM – 850/900/1800/1900 CDMA – 1x/EVDO […]

November 10, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYIR Tech Introduces TI Sitara Cortex A9 MYC-C437X SoM and MYD-C437X Development Board

MYIR Tech previously launched Ricoboard, a low cost single board computer powered by Texas Instruments AM4379 ARM Cortex A9 processor. The company has now introduced a system-on-module based on Sitara AM437x processors, as well as a corresponding carrier board for industrial applications. MYIR Tech MYC-C437x Sitara AM437x System-on-Module MYC-C437x SoM specifications: SoC – Texas Instruments AM437x single core ARM Cortex A9 processor @ up to 1GHz (AM4376, AM4377, AM4378, AM4379) with PowerVR SGX530 GPU (for AM4378/AM4379) System Memory – 512MB DDR3 (256MB optional) Storage – 4GB eMMC Flash (reserved 256/512MB Nand Flash design), 16MB QSPI Flash (unpopulated by default), 32KB EEPROM Connectivity – Gigabit Ethernet PHY Peripherals and signals via 2x 100-pin board to board connectors (0.8mm pitch): 2x Gigabit Ethernet 2x USB 6x Serial ports, 2 x CAN 2x I2C, 2 x SPI 14x ADC (8 channels from ADC1 and 6 channels from ADC0) 3x SDIO 2x Camera interfaces JTAG […]

November 5, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 243 Comments

Giveaway Week – A80 Optimusboard Development Board

Together with Rockchip RK3288, Allwinner A80 is one of the most powerful Chinese ARM processors for mini PCs or development board, and today I’m starting a giveaway for A80 OptimusBoard development board based on Allwinner octa core big.LITTLE processor. When I got the board last year, it was indeed powerful as shown in benchmarks. But unfortunately after Allwinner provided me with a new firmware supposed to fix some NTFS write performance issues, I quickly discovered it also had some stability issues whose reasons were not clear, and Merrii Technology support is not very good to say the least, at least for hobbyists, and even now there’s no operating system for download on the board page. Luckily PcDuino Arches (previously known as PCDuino8) is basically the same, and you can download some Lubuntu & Android images on Linksprite website instead. The firmware has not been updated since 2014 however. To enter […]