development board News - Page 265 of 276 - CNX Software

December 31, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$135 ARMBRIX Zero Exynos 5 Development Board Is Now Available for Pre-order

Ten days ago, I wrote about ARMBrix Zero, the cheapest Cortex A15 board (soon to be) available based on Samsung Exynos 5250 processor. It is now available for pre-order, and the company organizes a raffle to send a free ARMBRIX Zero board to the winner. I’ve received some updated specifications, although we don’t learn much more: CPU – Exynos 5 Dual ARM Cortex A15 Dual GPU – Mali T604 Embedded GPU Memory – 2GB DDR3 X32, 800MHz Storage – MicroSD slot Audio – ALC5631Q Line In/Out, SPDIF Coaxial type Video – HDMI A Type External Ports: 2x USB2.0 Host 1x USB3.0 Host 1x USB2.0 Device 1x SATA 1x Ethernet RJ45 Expansions – 3 Headers (Further details should be available later this week) CON16 – MIPI Master/Slave, 1x I2C, GPIO CON19 – 3x serial interfaces, 2x I2C, 2x ADC, JTAG, USB, MMC, and reset CON20 – I2S, Interrupt and GPIO pins, […]

December 21, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Olimex A13-OLinuXino-MICRO Development Board Unboxing And Review

Every Friday, Olimex organizes an online competition where they give away one of their board. They’ll ask a (usually simple) technical question on their twitter account at 22h00 (GMT+7), and all you have to do is to reply to their tweet with the correct answer within one hour. The winner is then selected randomly with random.org. There are usually 50 to 100 respondents so the odds are pretty good. I played a few times, and finally, I was lucky enough to win an A13-OLinuXino-MICRO development board at the beginning of December. I received it yesterday, after UPS took a whooping 15 days to deliver the board (Way to go UPS!). The board can be purchased on Olimex for 35 Euros plus shipping and taxes, or even lower if you order larger quantities. A13-OLinuXino-MICRO is a stripped down version of A13-OLinuXino-WIFI with the following specs: SoC – AllWinner A13 Cortex A8 […]

December 19, 2012December 19, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$66.75 Beaglebone and Other Development Boards Xmas Deals

I’ve come across Xmas deals for uCLinux, Linux and Android development boards & kits by Texas instruments and Emcraft Systems. TI offers 25% discount off five Sitara Linux/Android development kits purchased via Ti e-Store: AM3359 Industrial Development Kit – A full-featured application development platform for evaluating the capabilities and features of Sitara AM335x ARM Cortex-A8 Processors for industrial applications. AM335x processors integrate industrial communication standards that work on Ethernet, CAN, and RS-485 physical layers. Regular price: $895 AM335x Starter Kit – Low-cost development platform based on AM335x ARM Cortex-A8 processor with multiple communication options such as Dual Gigabit Ethernet, WiFi and Bluetooth connectivity, as well as a 4.3″ LCD Touchcreen (resistive). Regular price: $199 AM3359 Industrial Communications Engine (ICE) – Low cost development platform targeted for systems that specifically focus on the industrial communications capabilities of the Sitara AM335x ARM Cortex-A8 Processors. Regular price: $99 Beaglebone – Low-cost, community-supported development […]

December 16, 2012February 13, 2013 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

$135 ARMBRIX Exynos 5 Dual Cortex A15 Development Board

If you want to develop on a Cortex A15 processor, but Arndale development board is a bit expensive for you, don’t despair as ARMBRIX development board featuring Samsung Exynos 5 Dual processor is currently being developed and should be available in Q1 2013 for $135. The preliminary specifications include: SoC – Samsung Exynos 5 Dual Cortex A15 CPU + Mali T604 GPU System Memory – 2 GB DDR3 @ 800 MHz Storage – microSD slot Video Output – HDMI Audio In/Out – HDMI, SPDIF, Line In/Out. USB – 2x USB 2.0 Host, 1x USB 3.0 host and 1x USB 2.0 device Ethernet – Via USB to Ethernet hub. SATA – The connector is on the left of the micro SD slot. Expansions – 3 headers. Dimensions – 85 x 95 mm This board is based on Arndale design, and will be software compatible. Currently, Arndale officially support Android only, but […]

December 9, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Cubieboard Unboxing and Quick Start Guide

I’ve received another cool board this week with the Cubieboard development board. As a quick reminder, the Cubieboard is the only proper low cost AllWinner A10 development board available, and comes with 512MB/1GB RAM, 4GB NAND Flash, 10/100 MBit Ethernet, HDMI output, 2x USB Host port, 1x USB OTG port, a microSD socket, a SATA interface, an IR sensor and 2 headers to access extra pins such as GPIOs, I2C, SPI,VGA pins, CVBS pins etc… CubieTech had a successful Indiegogo campaign where the 1GB board was available for $59 including worldwide shipping (and as low as $19 for early birds), and you can now buy it from resellers. [Update: It’s now available with several cables, USB to TTL debug board, and an enclosure for $80 on dx.com] Cubieboard Unboxing The board comes with a SATA cable and a USB cable for power. There’s no power supply so you’ll need you […]

December 5, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

AllWinner A10s Processor Overview

Between the AllWinner A10 and AllWinner A13 processors, there’s now an alternative. AllWinner A10s is based on AllWinner A13 architecture (sun5i), but adds HDMI and Ethernet MAC which makes it suitable for mini PCs and set-top boxes. The first time I heard about this processor was in August with IP878 mini PC, and in October, one reader (Alex) informed me AllWinner had posted more details about his new processor. Here are the key features of this (relatively) new SoC: CPU/GPU – ARM Cortex-A8 Core with 32KB D-Cache/ 32KB I-Cache / 256KB L2 Cache, and Mali-400 VPU HD Video Decoding 1080p@30fps of VP8/6, H.264/H.263, WMV9/VC-1, WMV7/8, MPEG-4/2/1, Xvid codecs HD Video Encoding 1080p@30fps with H.264 codec Video Out – HDMI 1.4 (1080p), Memory Up to 1GB DDR2/DDR3 up to 533MHz (16/32 bits Data Bus) MLC/TLC/SLC/EF-NAND ECC 64-bit Peripherals: USB2.0 OTG, USB2.0 HOST （OHCI/EHCI） SD Card V.3.0, eMMC V.4.2 SPI, TWI and […]

November 30, 2012December 1, 2012 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

$69 ODROID-U & $89 ODROID-U2 Exynos 4412 Development Boards

Hardkernel has just announced 2 tiny quad core development boards based on Exynos 4412 @ 1.4 GHz (as used in Samsung Galaxy S3) and Exynos 4412 Prime @ 1.7 GHz (as used in Samsung Galaxy Note 2) called respectively ODROID-U and ODROID-U2. The other difference is the U version comes with 1 GB RAM, and the U2 version with 2 GB RAM. Here are the specification the ODROID-U and ODROID-U2 boards: Processor – Samsung Exynos4412 @ 1.4 GHz (ODROID-U) or Exynos 4412 Prime @ 1.7 Ghz (ODROID-U2), which can be overclocked respectively to 1.8 GHz and 2 GHz. GPU – Mali-400 clocked at 400MHz (ODROID-U) or 440MHz (ODROID-U2), which can be overclocked respectively to 533 and 633 MHz. System Memory – 1GB LPDDR2 DRAM @ 800MHz (ODROID-U) or 2GB @ 880MHz (ODROID-U2) Storage – microSD socket, eMMC connector USB – 2x USB 2.0 Host ports, 1x USB 2.0 device for ADB/mass […]