Xilinx Zynq-7000 All Programmable SoC Mini-Module Plus System-on-Module

In January 2014, Avnet announced Xilinx Zynq-7000 All Programmable SoC Mini-ITX board featuring Xilinx Zynq-7045 or Zynq-7100 ARM + FPGA SoC,  and more recently, the company has launched  “Xilinx Zynq-7000 All Programmable SoC Mini-Module Plus” systems-on-module (SoM) based on the same platforms, as well as a corresponding development kit including a baseboard and a power module. The SoM and development platform target PCI Express, embedded controllers, general-purpose prototyping, networking and communications, storage and servers, and Ethernet/Internet applications. Xilinx Zynq-7000 Mini-Module Plus specifications: SoC- Xilinx Zynq-7045 or Zynq-7100 dual core Cortex-A9 @ up to 1GHz with FPGA (350K or 444K logic cells) System Memory – 1GB DDR3 SDRAM Storage – 128MB parallel flash, 32MB QSPI flash, 8KB EEPROM, and micro SD slot Connectivity – Gigabit Ethernet USB – USB 2.0 OTG port Debugging – USB UART, JTAG programming/configuration port, PJTAG header User’s IO via dual board-to-board connectors: 132 User I/O (66 […]

Habey HIO Project ARM Board and HIO Wallpad PoE Automation Panel (Crowdfunding)

Habey has recently unveiled HIO Project, a $100 ARM Linux board designed for rapid prototyping powered by Freescale i.MX6 dual lite or quad, and shortly after, the company launched a Kickstarter project for HIO Wallpad, an in-wall Power-over-Ethernet touch controller for home or office automation embedding HIO Project boards. HIO Project Boards HIO Main Board (HIO-EMB-1200) specifications: Soc – Freescale i.MX6 Dual Lite or Quad ARM Cortex A9 processor @ 1 GHz + Vivante GPU System Memory – 1GB DDR3 Storage – 4G iNAND flash, 1x micro SD socket Video Output – 1x HDMI Audio – 1x on-board audio codec with 1W Amplifier built-in to I/O expansion headers Connectivity – 1x GbE PHY to I/O expansion headers Expansion Connectors: 1x PCIe PHY to I/O expansion headers 8x 50-pin 1.27mm pitch female header for I/Os: 24bit Parallel Display Port, dual channel 24bit LVDS, MIPI DSI up to 24bit, MIPI CSI up […]

Phytec phyBOARD WEGA Industrial Pico-ITX SBC Features Texas Instruments Sitara AM335x SoCs

Phytec has recently announced phyBOARD WEGA board powered by Texas Instruments AM335x Sitara ARM Processors via their phyCORE-AM335x SoM, which comes with up to 1GB DDR3 SDRAM, and up to 2GB NAND Flash. This single board computer targets industrial HMI (Human Machine Interface) and is suitable for various automation and display applications. PhyBOARD WEGA specifications: SoM – phyCORE-AM335x with: SoC – Texas Instruments Sitara AM355x ARM Cortex-A8 processor @ up to 1GHz, with PowerVR SGX530 GPU System Memory – 256 MB DDR3 RAM (Max: 1GB) Storage – 128 MB NAND Flash (Max: 2GB), optional 8 MB NOR Flash, 4KB EEPROM External Storage – micro SD card slot Connectivity – 2 x 10/100 Ethernet USB – 1 x USB Host, 1 x USB OTG Display I/F – 24bpp TTL Communication Interfaces – 6 x UART, 3 x I2C, 2 x SPI, 1 x CAN Expansion Connectors – 1x ADC(12Bit, 8Channel), GPIOs, […]

$11 ButtonDuino is Button-Sized Arduino Compatible Board (Crowdfunding)

Meet ButtonDuino yet another tiny, and cheap, Arduino compatible board. The board is breadboard mountable, measures just 18.64 mm x 18.25 mm, and sells for $10 (beta) and up, not including shipping. ButtonDuino specifications: MCU – Atmel ATTINY85-20H with 8K flash (6k available after USB bootloader), 512 bytes SRAM, 512 bytes EEPROM I/Os 6 x Available I/O Pins and I2C and SPI Expandable  I2C and SPI Expandable 3 x 8 bit Hardware PWM  pins 4 x 10 bit ADC pins Misc – Power LED, Test LED (Pin 1) Power – 5V, USB regulated powered up to 800mA via external power supply or 500mA from PC/Laptop. Dimensions – 18.64 mm x 18.25 mm (0.73in x 0.718in) The board is programmable via USB or AVR mkII, is compatible with Arduino IDE version 1.0 or greater in Windows, OSX and Linux,  and supports NI LabVIEW. ButtonDuino’s schematics, code and bootloaders will be released once the product development […]

SolidRun HummingBoard is a Raspberry Pi Compatible Board Powered by Freescale i.MX6

Yesterday, I wrote about Banana Pi, an AllWinner A20 powered development board that’s mechanically and electrically compatible with the Raspberry Pi so that you can keep using your existing R-Pi accessories. It turns out another company is working on a similar concept. Solidrun who has brought us Cubox and Cubox-i in the past, will soon launch HummingBoard, a Raspberry Pi compatible board powered by Freescale i.MX6 solo/dual/quad SoC, bring even more power than the AllWinner A20 dual core Cortex A7 SoC found in the Banana Pi. The HummingBoard, previously known as Carrier One, is composed of a baseboard and SolidRun microSOM (micro System-on-Module) have comes with the followings specifications: SoC = Freescale i.MX6 Quad @ 1 GHz with Vivante GC2000 3D GPU. The microSoM also comes in solo and dual flavors, and although it’s likely the HummingBoard will be sold with these variants too, it’s not 100% confirmed System Memory […]

AllWinner A80 To Support 5 Operating Systems, Products To Become Available in May

AllWinner has released some more materials about their AllWinner A80 Ultracore octa core big.LITTLE SoC ahead of the Hong Kong Electronics Fair 2014, and we’ve learned more about OptimusBoard, as well as tablets and TV boxes availability through a video interview shot by Charbax at the exhibition. Part of the release was more detailed specifications: CPU Octa-Core big.LITTLE Cortex-A15/7 Low-power CoolFlex power management architecture 2MB + 512 KB L2 Cache GPU – Imagination Technologies PowerVR 64-core G6230 with support for OpenGL ES 3.0/2.0, OpenCL 1.x, RenderScript, DX 9.3/10.0 Memory Supports dual-channel DDR3/DDR3L/LPDDR3/LPDDR2, up to 8GB Supports Raw NAND with 72-bit ECC Supports eMMC V4.5 Video Supports UHD H.264/VP8 4Kx2K@30fps video playback Supports multi-format FHD video decoding, including MPEG 1/2/4, H.263, H.264. WMV9/VC-1, etc Supports H.265/VP9 1080p@30fps video playback Supports H.264 HP/VP8 4Kx2K@30fps video capture Supports 3840×1080@30fps 3D decoding, BD/SBS/TAB/FP supported Supports 3840×1080@30fps 3D encoding Supports RTSP, HTTP, HLS, RTMP, MMS […]

Banana Pi is a Raspberry Pi Compatible Board fitted with an AllWinner A20 SoC

So you’ve got a Raspberry Pi board, an enclosure, and a few add-on boards. Your application would however do with some more processing power, or you’d like to run Android, but you don’t want to have to purchase accessories all over again for another board. Banana Pi could be the solution, as it’s apparently [Update: it’s not. See comments] mechanically and electrically compatible with the Raspberry Pi, and comes with a dual core Cortex A7 AllWinner A20 SoC with 1GB RAM, a Gigabit Ethernet port, and a SATA port, among other things. The board does indeed look familiar, with all external connectors at the exact same positions, but the hardware specs are fairly different: SoC- Allwinner A20 dual core Cortex A7 processor @ 1 GHz with Mali-400MP2 GPU System Memory – 1 GB RAM Storage – SD card slot, SATA connector Video output – HDMI, Composite, and LVDS/RGB Audio I/O […]

Atmel SAMA5D3 Xplained Board Unboxing and Quick Start Guide

Atmel SAMA5D3 Xplained is an evaluation board running Linux powered by SAMA5D36 ARM Cortex A5 micro-processor with 256 MB DDR2, 256 MB flash, two Ethernet ports, 3 USB connectors, and more. This embedded board targets industrial automation, networks, robotics, control panels and wearable applications. The only video output is an LCD connector so it is reserved for headless or flat panel based applications. You can check full specs on my Atmel SAMA5D3 Xplained announcement post. The company kindly sent me a sample, so that I can share my experience with the board. I’ll first post some unboxing pictures, show how to get started with the pre-installed image, and build my own Linux image. The board can be purchased for $79 from Atmel e-Store, as well as several distributors (P/N: ATSAMA5D3-XPLD). Atmel SAMA5D3 Xplained Unboxing I’ve been sent the board via DHL in the following package, which gives  a short desscription […]

EmbeddedTS embedded systems design