development board News - Page 242 of 276 - CNX Software

October 13, 2014October 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Allwinner H64 based Nobel64 Could the First Affordable 64-bit ARM Development Board

Based on the comments I read on this blog many people are early waiting for 64-bit ARM boards. There are already ARMv8 server boards by Applied Micro, AMD and others, but these cost several thousand dollars and are not sold to individuals, and ARM recently launched Juno development board, but it should be well over the budget of most hobbyists too. But the wait may soon be over, as Padnews found out Allwinner and Merrii Technology showcased Nobel64 development board powered by a yet to be announced Allwinner H64 64-bit ARM SoC at the Hong Kong Electronics Fair. Nobel64 development board specifications: SoC – Allwinner H64 quad core 64-bit ARM processor, most probably based on Cortex A53 cores. System Memory – 2GB DDR3 Storage – 16 GB eMMC + micro SD card slot Video / Audio Output – HDMI 1.4 + AV port. Connectivity – Gigabit Ethernet, dual band Wi-Fi, […]

October 13, 2014October 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Waxberry Pi3 Rockchip RK3188 Development Board Includes a SATA Port

Development boards based on Rockchip RK3188 are a rarity, and until today, I only knew about Radxa Rock boards. Waxberry, a Chinese based company, already made some development boards such as Waxberry Pi2 based on Rockchip RK3066, and recently they’ve launched Waxberry Pi3 development board powered by Rockchip RK3188 processor, with 1 GB RAM, 8 GB flash, a SATA port, expansion headers and more. Waxberry Pi3 (aka WB-RK3188) specifications: SoC – Rockchip RK3188 ARM Cortex-A9 quad core @ 1.6Ghz + Mali-400 MP4 GPU System Memory – 1GB RAM Storage – 8GB NAND Flash (SK Hynix H27UCG8TETR) + micro-SD slot + SATA port Video Output – HDMI, LVDS connector, and AV output (TBC) Connectivity – 10/100M Ethernet port, 802.11b/g/n WiFi Audio I/O – HDMI, AV?, mic IN Camera – 24-pin CSI connector USB – 2x USB 2.0 host ports, 1x micro USB OTG Misc – IR sensor, RTC with battery slot […]

October 7, 2014October 7, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$25 TinyScreen is an OLED Display for TinyDuino Arduino Compatible Board (Crowdfunding)

Back in 2012, Tiny Circuits launched a Kickstarter campaign for TinyDuino, an Arduino compatible board that’s… tiny, based on Atmel Atmega328P, and supports tiny stackable shields in a similar fashion to Microduino (launched in 2013). The campaign was successful, and the company is now back on Kickstarter with TinyScreen, an OLED display that can be stacked on top of TinyDuino to create a smartwatch, a minuscule gamepad, smart glasses, and more. TinyScreen technical specifications: 96×64 OLED display, 16-bit color depth 0.96″ (24.4mm) viewable area Software controllable backlight (OLED brightness) Power down mode Four push buttons along the sides (connected to IO pins) SPI interface for display Power Supply – 3.0V to 5.5V operation (higher voltages supported with TinyShield power regulator) Power Consumption – 20 – 45mA max supply current (depending on brightness) Dimensions – 25.8mm x 25.0mm Programming of TinyDuino can be done through a web interface for Arduino called […]

October 6, 2014October 6, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

KDDI Unveils Tiny BLE/Zigbee Development Board Running Mozilla Firefox OS

KDDI has recently announced Open Web Board, an HDMI TV stick powered by Rockchip RK3066, and running Firefox OS, just like the recently announced MatchStick. The board is however aimed at embedded and web developers who want to create apps for Firefox OS, and interface with external devices over Bluetooth Low Energy or Zigbee (optional module) communication, optionally using Gluin, a web based graphical “application development tool that enables simple linking programming between electronic devices”. Open Web Board specifications: SoC – Rockchip RK3066 dual core Cortex A9 processor @ 1.6 Ghz with Mali-400 MP4 GPU System Memory – 1 GB RAM Storage – 8 GB flash Video Output – HDMI USB – 1x USB 2.0 host port, 1x micro USB for power Connectivity – 802.11 b/g/n Wi-Fi (AP6210 module), Bluetooth 2.1 (HFP/A2DP/AVRCP)/4.0 GATT. and optional Zigbee via external module Dimensions – Small This dongle runs Firefox OS 1.4. KDDI showcased […]

October 4, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Current Performance and Stability Issues on AllWinner A80 OptimusBoard Development Board

Sine A80 OptimusBoard is the first ARM hardware that supports both USB 3.0 and Gigabit that I’ve ever owned, so I though it might be interesting to see what performance I could get with a USB 3.0 hard drive through the USB 3.0 OTG port of the board. For testing purpose, I bought a USB 3.0 OTG adapter on Ebay, but I did not look closely enough as it turned out to be only a USB 3.0 OTG to USB 2.0 female adapter capable of USB 2.0 speeds… Kind of useless item since you can plug a standard USB 2.0 OTG adapter into a USB 3.0 OTG receptacle. But I tried my hard drive anyway, and quickly realized write performance was very poor at 3 MB/s on the NTFS partition, whereas most other devices can handle at least15 MB/s, and usually over 25 MB/s. So I contacted Allwinner with this […]

October 2, 2014October 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Atmel Introduces SAMA5D4 Embedded MPUs With 720p Video Decoder And TrustZone Support

Atmel has expanded its SAMA5 Cortex A5 embedded processor family with SAMA5D4 series adding an optional video processing unit capable of decoding H264, VP8 and MPEG4 at 720p / 30fps, as well as support for ARM NEON and TrustZone technology. There are also some other changes with regards to connectivity: no Gigabit Ethernet, more UART interfaces, less SPI interfaces, etc… Key features listed of Atmel SAMA5D4 series:: ARM Cortex-A5 core up to 528MHz (840DMIPS) with NEON & TrustZone support, 2x 32KB L1 cache, and 128KB L2 cache. Optional 720p hardware video decoder supporting H264/263, VP8, JPEG, and MPEG4. Graphic LCD TFT controller with overlays for image composition, resistive touchscreen controller. CMOS image sensor interface. Three high-speed USB ports (configurable as three hosts or two hosts and one device port). Dual EMAC 10/100 with IEEE1588 support (Precision Time Protocol). Other I/Os – 8x UART, 8x SPI, 4x TWI, 2 HS SDIO/SD/MMC, […]

October 1, 2014July 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

HydraBus is an Open Source Hardware STM32 Devkit with Support for NFC via HydraNFC Shield

Recently, I wrote about the public availability of a MicroPython board based on STMicro STM32F4 Cortex M4 support that can easily be programmed with Python. It turns out there’s another STM32 board called HydraBus, also supporting Micro Python firmware, or another embedded firmware based on ChibiOS, together with an optional HydraNFC shield capable of sniffing, reading/writing or emulating any 13.56MHz NFC tags. HydraBus Specifications: MCU – STMicro TM32F405RG micro-controller @ 168 MHz with 1MB flash, 192KB SRAM, and an FPU. External Storage – Micro SD card slot up to 48MHz (~24MB/s) Expansion Headers – 4 headers with access to 44 I/Os (some already used by micro SD and USB 1 & 2). USB – 2x micro USB connector including 1x OTG port, and 1x device/host port, both with ESD protection. Misc – Reset and user button, user LED, Power – 5V via micro USB port. Dimensions – 60mm x […]

September 27, 2014April 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Firefly-RK3288 Development Board is Now Available for $189

Three days ago, a T-chip representative informed me privately that Firefly development board (Rockchip RK3288) would not be available on foreign websites, and that it was unclear when the board would be selling in China. So either I’ve been lied to, or there’s poor internal communication within the company, as they’ve now listed Firefly-RK3288 board on Taobao for 800 CNY (~$130), and it’s also available on GeekBuying for $159 including shipping, possibly by somebody unrelated to T-chip, especially there are only 3 units for sale. Let’s go the specifications that have slightly changed since the original announcement: SoC – Rockchip 3288 quad core ARM Cortex A12 / A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2G DDR3 Storage – 16 GB eMMC flash + micro SD slot Video I/O HDMI 2.0 up to 3840×2160@60p VGA out (D-SUB connector) Dual MIPI, Dual LVDS and and EDP […]