development board News - Page 223 of 276 - CNX Software

October 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Flip & Click Board with Atmel SAM3X8E MCU Features 4 mikroBUS Sockets & Arduino Headers

HummingBoard Gate introduced last month was the first board I saw with a mikroBUS socket that can be used with over 150 “Click boards” by MikroElektronika adding functionalities such as sensors, OLED displays, relays, servos, and so on. But if you project don’t quite need the power of a full featured Linux board, or you simply prefer working with the Arduino IDE, MikroElektronika has just launched Flip & Click board powered by an Atmel SAM3X8E Cortex-M3 micro-controller and featuring four mikroBUS sockets on the back of the board, as well as Arduino compatible headers on the top. Flip & Click board specifications: MCU – Atmel AT91SAM3X8E Cortex M3 micro-controller @ 84MHz with 512 KB flash, 100 KB SRAM (64+32+4), also used in Arduino Due. Expansions Headers Arduino UNO compatible headers on the top 4x mikroBUS socket on the bottom USB – micro USB port for programming and power Misc – […]

October 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$9 ESP8266 D1 Board Features Arduino UNO Headers

We’ve already seen the Arduino IDE supports ESP8266(-EX) WiFi SoC, and some companies have designed Arduino shields for ESP8266 modules, but so far I had never seen an ESP8266 board with Arduino UNO form factor supporting Arduino shields, and that’s exactly what showed up in DX new arrivals RSS feed with a white label ESP-12E UNO board selling for $11.75 including shipping. The “D1” board has the following specifications: ESP8622 Module – AI-Thinker ESP12-E module (as found in NodeMCU) based on ESP8266-EX SoC @ 80 or 160 MHz with 4MB flash Connectivity – 802.11 b/g/n with PCB antenna. Supports station / softAP / SoftAP + station modes, WPA/WPA2 security. I/Os 11x Digital I/O pins 1x Analog Input pin I/O logic level: 3.3V ADC pin (A0) input voltage: 0-3.3V Debugging – Via micro USB using CH340G USB-TTL serial chip Misc – Reset button Power Supply – 6-24VDC via DC jack, 5V via […]

October 20, 2015October 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Arduino 101 Board Features Intel Curie Module, Bluetooth LE, and Sensors

I’ve recently learned that the battle between the two Arduino teams, namely Arduino SRL (arduino.org) in Italy, and Arduino LLC (arduino.cc) in the US, had taken another turn with Arduino LLC now branding their boards as Arduino in the US, and Genuino in the rest of the world. This may certainly bring confusion to new comers, especially as they have to deal with different version of the Arduino IDE. With that backdrop, Arduino LLC has now introduced Arduino 101 (aka Genuino 101) board powered by Intel Curie module with Quark SE x86 SoC with Bluetooth LE and a 6-axis combo sensor. Arduino 101 specifications: SoC – Intel Curie compute module including an Intel Quark SE x86 32-bit microcontroller @ 32 MHz and an a DSP sensor hub @ 32Mhz with 384 KB flash, 80 KB SRAM (24KB available for sketches), , Bluetooth LE, and 6-axis combo sensor with accelerometer and […]

October 17, 2015October 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

UP Board is a Raspberry Pi Clone with an Intel Atom X5 Processor (Crowdfunding)

Many ARM based “insert-fruit-name-here” Pi boards are available on the market, and they all look like the Raspberry Pi board to some extends, but thanks Emutex we’ll soon get the “UP board” powered by Intel Atom x5-Z8300 and in Raspberry Pi form factor including the ubiquitous 40-pin Raspberry Pi headers, DSI and CSI connectors, and mostly the same port placements, with some extra goodies like a USB 3.0 port and Gigabit Ethernet. Up Board specifications: SoC – Intel Atom x5-Z8300 “Cherry Trail” quad core processor @ 1.44 GHz (Burst frequency: 1.84 GHz) with Intel Gen8 HD graphics @ 500 MHz System Memory – 1 GB DDR3L-1600 Storage – 16 or 32 GB eMMC Video Output / Display – HDMI, DSI connector Audio I/O – HDMI Connectivity – Gigabit Ethernet USB – 4x USB 2.0 host ports, 1x USB 2.0 pin header, 1x micro USB 3.0 port (under the board) Camera […]

October 15, 2015October 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Turris Omnia is a Feature-Packed OpenWRT Router Board Powered by Marvell ARMADA 385 Processor

FireWRT and WiTi router boards based on Mediatek MT7621A processor offer lots of high speed interfaces with multiple Gigabit Ethernet ports, SATA connectors, and USB 3.0 ports, as well as 802.11ac connectivity for $70 to $80. Sadly FireWRT development was canceled once the company realized they could not get the Mediatek SoC at the right price, and while WiTi router has not been shipped to backers just yet. An even more powerful solution, which should cost $100 and up, is now in development with Turris Omnia board powered by Marvell ARMADA 385 dual core ARMv7 processor, and made in the Czech Republic. Turris Omnia board specifications: Processor – Marvell ARMADA 385 (88F6820?) dual core ARMv7 processor (Cortex A9 class) @ 1.6 GHz with 1MB L2 cache System Memory – Up to 1GB DDR3 Storage – 4GB flash, mSATA slot Connectivity 5x Gigabit Ethernet LAN ports 1x Gigabit Ethernet WAN port […]

October 15, 2015October 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

BeagleBoard-X15 Board Based on TI Sitara AM5728 SoC Announced, To Sell for $239

We’ve first found out about Beagleboard-X15 open source hardware board about a year ago, and development has taken a bit longer than expected, but Beagleboard.org has now formally launched BeagleBoard-X15, which remains based on Texas Instruments Sitara AM5728 dual Cortex A15 processor, and is expected to ship before Christmas for $239. The key part of the specifications are still the same as last year, but we’ve got a few more details now: SoC – Texas Instruments Sitara AM5728 with: Two ARM Cortex A15 cores @ 1.5 GHz PowerVR SGX544-MP2 3D GPU, Vivante GC320 2D GPU Two Cortex M4 cores @ 212 MHz Dual core C66x DSP @ 700 MHz IVA (Image and Video Accelerator) for 1080p video decode (H.264, VC-1, MPEG 1/2/4, AVS, etc..) Four 32-bit PRUs (Programmable Real-time Units) System Memory – 2GB DDR3L @ 533MHz Storage – 4GB 8-bit eMMC flash, micro SD slot, and eSATA interface (500 […]

October 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

PicoZed SDR (Software Defined Radio) System-on-Module Supports 70 MHz to 6.0 GHz Frequency Bands

PicoZed SoM based on Xilinx Zynq-7000 series SoCs was introduced in 2014 by Avnet. The company has now introduced a new version specifically designed for software designed radios which combines Zynq-7035 SoC with Analog Devices AD9361 RF transceiver supporting 70 MHz to 6.0 GHz frequency bands. Target applications include portable agile wireless communications, P25 public safety Radio, point-to-point communication, femtocell & picocell base stations and portable instrumentation. PicoZed SDR SoM specifications: SoC – Xilinx Zynq XC7Z035-2L FBG676I AP SoC with a dual core Cortex A9 processor @ 800 MHz and Kintex-7 FPGA with 275K logic cells System Memory – 1GB DDR3L SDRAM Storage – 256Mb QSPI Flash, microSD Card Interface Network Connectivity – 10/100/1000 Ethernet PHY USB – USB 2.0 OTG ULPI PHY I/Os – 205+ User I/O + 4 GTX channels Radio Transceiver – Analog Devices AD9361-BBCZ integrated RF Agile Transceiver with: 2 × 2 RF transceiver with integrated […]

October 10, 2015October 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$249 TI AM437x Starter Kit for Industrial Design Launched by Element14

Element14 has recently launched their “Texas Instruments AM437x Starter Kit” based on Sitara AM4378 Cortex A9 processor, including a board and touch screen LCD, and targeting industrial, HMI (Human Machine Interface) and networking applications. Element14 Texas Instruments AM437x Starter Kit specifications: SoC – Texas Instruments Sitara AM4378 ARM Cortex A9 processor @ 1 GHz with PowerVR SGX530 GPU System Memory – 1GB DDR3L SDRAM (2x 4-Gb Micron chips). Storage – 64MB SPI NOR Flash (MX66L51235FMI), serial EEPROM with board specific data, 1x micro SD slot Display – 4.3″ Capacitive Touch LCD Connectivity – 2x 10/100/1000M Ethernet RJ45 ports (Micrel KSZ9031RN transceivers), support for COM8 form-factor wireless boards via J20 Samtec card edge connector. USB – 1x USB 2.0 host port, 2x micro USB ports Camera – 2x 12 header for custom-made camera module from TI Audio – TLV320AIC3106 audio codec, 2x audio jacks for headphone out, and Line In Sensors […]