dect nr+

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Conexio Stratus Pro nRF9151 low-power IoT development kit supports LTE-M/NB-IoT, DECT NR+, GPS, and more

Conexio Stratus Pro nRF9151 low-power IoT development kit supports LTE-M/NB-IoT, DECT NR+, GPS, and more

Conexio Stratus Pro nRF9151 devkit

Conexio Stratus Pro nRF9151 is an IoT development kit based on Nordic Semi nRF9151 system-in-package (SiP) with LTE-M/NB-IoT, DECT NR+, and GNSS connectivity designed for battery-powered cellular-connected products such as asset trackers, environmental monitors, smart meters, and industrial automation devices. It’s offered with the “Stratus Pro Expansion Dock” allowing users to add WiFi 6 through an nRF7002 expansion board and various other modules via Grove, Qwiic, MikroBus, and Seeed Studio’s XIAO connectors or sockets. It’s an update to the original Conexio Stratus Pro based on nRF9161 introduced last June with a very similar feature set. Let’s have a deeper look to find out any potential differences between the two versions of the devkit. Conexio Stratus Pro nRF9151 specifications (with changes highlighted in bold or strikethrough): System-in-package – Nordic Semi nRF9151 SiP MCU – Arm Cortex-M33 clocked at 64 MHz with 1 MB Flash pre-programmed MCUBoot bootloader, 256 KB RAM Modem […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Conexio Stratus Pro – A battery-powered nRF9161 development kit with LTE IoT, DECT NR+, GNSS connectivity (Crowdfunding)

Conexio Stratus Pro – A battery-powered nRF9161 development kit with LTE IoT, DECT NR+, GNSS connectivity (Crowdfunding)

Conexio Stratus Pro nRF9161 IoT prototyping kit

Conexio Stratus Pro is a tiny IoT development kit based on Nordic Semi nRF9161 system-in-package (SiP) with LTE-M/NB-IoT, DECT NR+, and GNSS connectivity and designed to create battery-powered cellular-connected electronic projects and products such as asset trackers, environmental monitors, smart meters, and industrial automation devices. Just like the previous generation Conexio Startus board based on the Nordic Semi nRF9160 cellular IoT SiP, the new Conexio Stratus Pro board supports solar energy harvesting and comes with a Feather form factor and Qwiic connector for each expansion. Conexio Stratus Pro specifications: System-in-package – Nordic Semi nRF9161 SiP MCU – Arm Cortex-M33 clocked at 64 MHz with 1 MB Flash pre-programmed MCUBoot bootloader, 256 KB RAM Modem Transceiver and baseband 3GPP LTE release 14 LTE-M/NB-IoT support DECT NR+ ready GPS/GNSS receiver RF Transceiver for global coverage supporting bands: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, […]

Posted on by Debashis Das - No Comments on Nordic nRF9151 – A smaller LTE-M/NB-IoT and DECT NR+ SiP with enhanced power efficiency and security

Nordic nRF9151 – A smaller LTE-M/NB-IoT and DECT NR+ SiP with enhanced power efficiency and security

Nordic’s New nRF9151 DECT NR+ SiP Module

Nordic Semiconductor has announced the availability of its new nRF9151 SiP module adding to the nRF91 cellular IoT lineup. This new module includes a 64MHz Arm Cortex-M33 SoC, LTE-M/NB-IoT connectivity with a radio-frequency front-end (RFE) for cellular support, and DECT NR+ connectivity. All this comes with a 20% smaller footprint and additional support for Power Class 5 20 dBm alongside Class 3 (23 dBm) compared to the Nordic nRF9161 SiP module also designed to power cellular IoT and non-cellular 5G solutions that was introduced just last month. Nordic nRF9151 SiP module specification: Processor and Memory – 64 MHz Arm Cortex-M33, 1 MB flash, and 256 KB SRAM. Modem – Integrated LTE-M/NB-IoT and DECT NR+ with support for 3GPP Release 14 LTE-M/NB-IoT. Location Tracking – Built-in GNSS receiver and support for cellular-based location features. Security – Arm TrustZone, CryptoCell for cryptographic operations, true random number generator (TRNG). Power Options – Supports […]

Posted on by Debashis Das - 2 Comments on Nordic’s nRF9161 SiP and DK support cellular IoT and DECT NR+ non-cellular 5G technology

Nordic’s nRF9161 SiP and DK support cellular IoT and DECT NR+ non-cellular 5G technology

Nordic nRF9161 SiP and Development Kit

Nordic Semiconductor recently announced the availability of the nRF9161 system in package (SiP) and pre-certified Development Kit designed to power both cellular IoT and non-cellular 5G technologies. This new device can connect to LTE-M, NB-IoT, and DECT NR+ networks while maintaining long battery life, better location tracking, and strong connectivity. Additionally, Nordic offers support through their nRF Connect SDK and the Nordic Developer Academy. The nRF9161 SiP is an improved version of the nRF9160 SiP, which has been the basis for various projects like the Actinius Icarus SoM DK, Conexio Stratus, nRF9160 Feather LTE IoT and GPS Board,  Ruuvi Node, and many other projects. Feel free to check those out if interested. The press release mentions that this new chip is an update of the nRF9160 and includes features like an Arm Cortex-M33 processor, 1 MB flash, 256 KB RAM, along with SPI, I2C, UART, PWM, and a 12-bit ADC […]

UP 7000 x86 SBC