bluetooth News - Page 57 of 72 - CNX Software

February 23, 2016February 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Canonical Introduces SoDeRa Software Defined Radio Solution for Base Stations and IoT Gateways

Canonical and Lime Micro have jointly announced SoDeRa low-cost software defined radio (SDR) which can be programmed to support any type of wireless standard including UMTS, LTE, LoRa, Bluetooth, Zigbee, RFID, Digital Broadcasting, and more, and aiming at helping operators reducing costs & complexity, while speeding up time to market and providing greater flexibility. The kit will include a board with the following specifications: FPGA – Altera Cyclone IV EP4CE40F23 Altera FPGA (compatible with EP4CE30F23) System Memory – 256 MB DDR2 SDRAM RF Lime Microsystems LMS7002M Transceiver with continuous Frequency range of 100 kHz – 3.8 GHz 4 x TxOut and 6 x RxIn U.FL connectors for RF cables Power Output (CW): up to 6.5 dBm Wi-Fi, 2G, 3G, LTE, any other air interfaces USB – 1x micro USB3 via CYUSB3014-BZXC Cypress Microcontroller for control, data transfer and power Misc – Status LEDs, RGB LEDs, 4x switches Dimensions – 100 mm x […]

February 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Samsung Artik IoT Boards and Devkits with WiFi, Bluetooth LE, and Zigbee Available, Partners Announced

Samsung Artik IoT boards will finally start selling on February 22 via Digikey. With the many fascinating developments in the IoT space over the year, you’d be forgiven if you completely forgot about Samsung Artik boards. So let’s have a quick recap. The Korean company previously announced three boards all supporting Bluetooth LE: Artik 1 – Ineda Systems Dual Core microAptiv MIPS32 processor with 1MB on-chip RAM, no GPU, and 4MB SPI flash Artik 5 – Dual core Exynos ARM processor @ 1GHz with ARM Mali 400 MP2 GPU, 512MB RAM and 4GB eMMC flash (both on-chip), with WiFi & Zigbee/Thread connectivity Artik 10 – Octa core Exynos processor with 4x ARM Cortex A15 @ 1.3GHz, 4x ARM Cortex A7 @ 1.0 GHz with ARM Mali-T628 GPU, 2GB LPDDR3 (on-chip), 16GB eMMC flash, and WiFi & Zigbee/Thread connectivity Samsung also partnered with multiple companies working on: Operating Systems – Tizen, […]

February 10, 2016March 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

LoPy Tiny IoT Developer Board Runs MicroPython, Supports LoRa, WiFi and Bluetooth (Crowdfunding)

Pycom launched WiPy last year, a WiFi IoT board based on Texas Instruments CC3200 ARM Cortex M4 SoC, and a few months after sending rewards to their Kickstarter backers, they are back on the crowdfunding platform to launch LoPy, another IoT development board that runs MicroPython and offers LoRa, WiFi and Bluetooth LE connectivity. LoPy board hardware specifications: SoC – Dual processor @ 160 MHz with WiFi & BLE radio with 400 kB RAM, 1MB flash External Storage – 4MB flash Connectivity 802. 11b/g/n @ 16Mbps with WEP, WPA/WPA2 WiFi security; SSL/TLS support; AES encryption engine. Bluetooth Classic and Low Energy LoRaWAN Semtech LoRa transceiver SX1272 @ 868 MHz (Europe) or 915 MHz (North America). Range – Node: Up to 40km; Nano-Gateway: Up to 5 km Nano Gateway Capacity – Up to 100 nodes. Internal chip antenna and u.fl connectors for external antennas Headers – 2x 14-pin headers for: Up […]

February 9, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cypress Introduces PSoC 4 L-Series ARM Cortex-M0 MCU and Development Kit

Cypress Semiconductor has recently unveiled PSoC 4 L-Series micro-controller family based on ARM Cortex M0 core with more programmable analog and digital blocks, expanded memory, new peripherals and higher number of I/Os, as well as the corresponding Arduino compatible CY8CKIT-046 PSoC 4 L-Series Pioneer Kit to evaluate their latest solution. Key features of PSoC 4 L-Series MCU ARM Cortex-M0 CPU @ 48-MHz with DMA controller, up to 256KB flash, up to 32KB SRAM and up to 98 GPIOs CapSense with SmartSense auto-tunning – 2x Cypress Capacitive Sigma-Delta (CSD) blocks Programmable analog 4x configurable opamps 4x current DACs (IDACs) 2x low-power comparators (CMP) One 12-bit, 1-Msps SAR ADC Programmable digital 8x Universal Digital Blocks (UDBs) 8x configurable 16-bit TCPWM 4x independent serial communication blocks (SCBs) Full-Speed USB 2.0 controller 2x CAN Controllers Segment LCD Drive support up to a maximum of 64 output (commons or segments) Power 1.71 to 5.5 V […]

February 9, 2016February 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Ugoos AM1 4K TV Box Review

Ugoos AM1 is yet another TV box based on Amlogic S905. I’ve already published specifications and uploaded some pictures of the nice looking cyan box and its board, so today I’ll report on my experience after actually playing with the device, where I mostly focused on known problems found on other S905 mini PCs, and some extra features added to Ugoos firmware. First Boot, Settings, and First Impressions I filled all three USB ports with a USB webcam, a USB hard drive, and a USB hub with RF dongles for MINIX NEO A2 Lite air mouse, Tronsmart Mars G01 wireless gamepad, and a USB keyboard (convenient for screenshots), and connected Ethernet, HDMI and power cables. A boot will usually take around 30 seconds. Before going through the user interface, I’ll mention that OTA firmware upgrade worked very well, and it was one of the first thing I did before the […]

February 5, 2016February 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ProView S3 Affordable 3-Axis Smartphone Stabilizer Helps Shooting Better Videos (Crowdfunding)

Smartphone stabilizers (aka gimbals) for smartphones allow you take much better videos while on the move, as they smooth the shaking that occurs when you walk, run, or bike. Stabilizers are currently available, such as KumbaCam or other white brand stabilizers, are sold for $250 to $400, but Navin, a Taiwanese company, has designed a cheap video stabilizer for smartphones with ProView S3 that starts at $125 + shipping via Indiegogo. ProView S3 3-axis stabilizer can handle larger size smartphones, features orientation sensors, precision motors, and stabilization algorithms to provide smooth video recording. Some of ProView S3 specifications and features include: Adjustable mount from 67mm to 78 mm width Wind resistant thanks to algorithms and mechanical design Connectivity – Bluetooth 4.0 for wireless firmware updates Dual IMU sensors with tilt, roll, and pan motors. Underslung shot- You can take videos upside down too… 4 operational modes – Full Lock (no […]

February 4, 2016February 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Maoxiaoer Bluetooth Smart Fishing Float Works with Android and iOS Devices

I used to go fishing a lot when I was a kid, and if in the future I go fishing again, I’d probably just leave the phone at home to enjoy with nature. But if you tend to fall asleep while fishing, or like to fish at night, Maoxiaoer smart fishing float will alert your smartphone over Bluetooth once you get a catch, and its LED will blink. From the outside it jsut looks like a normal blue fishing float made of balsa, but it takes two CR425 batteries to power LEDs and Bluetooth connectivity. The sensitivity of the float’s alarm as well as LED intensity is controlled by an app that runs on Android or iOS. Here are some of the fishing float specifications: Connectivity – Bluetooth 4.0 up to 15 meters Sensitivity – 12 levels Battery life – 8 hours Color – White, black, gold Dimensions – Float […]

February 4, 2016April 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

FriendlyARM NanoPC-T2 Board Gets More Storage, WiFi & Bluetooth, Stays Cool, and Costs Less

FriendlyARM NanoPC-T1 board powered by Samsung Exynos 4412 processor with 1GB RAM and 4GB eMMC flash was unveiled at the start of 2014 for $69. The company has now announced NanoPC-T2 with Samsung S5P4418 processor with 1GB RAM, and 8GB Flash, as well as WiFi and Bluetooth, as Gigabit Ethernet all of which were missing in the first version. NanoPC-T2 also has a power management chip, and a larger heatsink, meaning that it does not suffer from overheating like NanoPi2 according to FriendlyARM. NanoPC-T2 specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz with Mali-400MP GPU System Memory – 1GB 32bit DDR3 RAM Storage – 8GB eMMC flash, and 1x SD card slot (on the bottom of the board) Connectivity – Gigabit Ethernet, 802.11 b/g/n WiFi and Bluetooth LE 4.0 (Ampak AP6212) with on-board chip antenna and 1x IPX antenna connector Video Output / Display […]