bluetooth News - Page 32 of 74 - CNX Software

October 29, 2020October 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NuMaker-IoT-M263A board is the Swiss army knife of IoT development

If you’d like an MCU board to experiment with various wireless (and wired) protocols used for Internet of Things applications, the Nuvoton NuMaker-IoT-M263A development board may be worth a look. Powered by a NuMicro M263KIAAE Arm Cortex-M23 CPU microcontroller, the board offers WiFi, Bluetooth, and LoRa connectivity, plus an mPCIe socket for 3G, 4G, or NB-IoT cellular connectivity. It also comes with various sensors, as well as CAN and RS485 transceivers for industrial control applications. NuMaker-IoT-M263A key features and specifications: MCU – Novoton NuMicro M263KIAAE Arm Cortex-M23 microcontroller @ 64 MHz with 96KB SRAM, 512 KB dual-bank flash for OTA upgrade, 4 KB LDROM; LQFP128 package Storage – MicroSD card connector On-board wireless modules ESP12-F (ESP8266) 802.11b/g/n module MDBT42Q-PAT Bluetooth 4.2/5.0 LE module APC1278 (for 408 / 433 / 470 MHz) LoRa module plus antenna Serial – CAN and RS485 transceiver USB – 1x Micro USB OTG connector (to M263 […]

October 28, 2020October 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

The quest for a blob-free WiFi & Bluetooth stack for BL602 WiSoC

I thought I was done writing about Bouffalo Lab BL602 WiFI & Bluetooth RISC-V SoC for a while after first covering the chip itself, and then an inexpensive BL602 development board this weekend. But the BL602 SDK has shown up in various Github repositories, including Bouffalo Lab’s own bl_iot_sdk repository, and as more people are looking into it, there’s now an effort to develop a fully open-source blob-free WiFi & Bluetooth stack for BL602, and other Bouffalo Lab WiFi and/or Bluetooth wireless chips. Last day we communicate with Bouffalolab, finally they release the SDK of BL602 (RV32 chip of wifi+bt), all code is open, except libblecontroller.a, libatcmd.a, libbl602_wifi.a (while they have all symbol inside)https://t.co/giHsQ4ezXxwe have a fork too https://t.co/FiaAIxLBc8 — Sipeed (@SipeedIO) October 27, 2020 First, Sipeed says the code is mostly open-source except for three libraries: ibblecontroller.a, libatcmd.a, libbl602_wifi.a, all of which are un-obfuscated, and easy to disassemble. Then […]

October 26, 2020October 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

STMicro launches cheaper STM32WB30 and STM32WB35 Bluetooth LE & Zigbee MCUs

STMicro introduced the first wireless STM32 microcontrollers in 2018 with STM32WB Cortex-M4/M0+ MCU family equipped with Bluetooth 5.0 and 802.15.4 radios, and they followed earlier this year with STM32WL Cortex-M LoRa SoC. The company has not just announced yet another wireless STM32 family but instead added the more affordable STM32WB35 and STM32WB30 chips that can be obtained for under $2 in quantities. The new STM32WB microcontroller enabled a low BOM cost thanks to their memory configuration. Specifically, STM32W30 comes with 256KB flash while STM32W35 features 512 KB flash, and both offer 96 KB of RAM. This compares to STM32WB55 will up to 1MB flash and 256KB of RAM. Apart from the lower memory and flash capacity, the new wireless MCUs have basically the same features as other members of the STM32WB family with 16-bit ADC, quad-SPI interface (STM32WB35 only), as well as Bluetooth Low Energy 5.0, Zigbee 3.0, and OpenThread […]

October 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Remodo X is a Programmable Bluetooth & IR Remote Control for Raspberry Pi (Crowdfunding)

There are plenty of Bluetooth or RF remote controls on the market, but Remodo X is a little different. Mainly designed for the Raspberry Pi board, the compact Bluetooth & IR remote control comes with four buttons that can be programmed from a mobile app to launch program or trigger scripts for home automation, home entertainment, or any other function you may think of. Remodo X specifications: Connectivity Bluetooth LE up to 30 meters (line-of-sight) via Realtek BLE 4.2 Class 2 chip IR up to 10 meters User Input – 4x keys for 8 different actions using long or short presses Misc – Buzzer for “find me” function Power Supply – 2x AAA batteries Dimensions – 114 x 36 x 13 mm Weight – 37 grams The remote control can be programmed in the yet-to-be-released Remodo app for Android or iOS with any smartphone that comes with Bluetooth LE connectivity. […]

October 10, 2020October 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NXP IW620 2×2 Wi-Fi 6 & Bluetooth 5.1 Chip Targets Gaming, Audio, Industrial and IoT Markets

NXP has announced the IW62X WiFi 6 & Bluetooth 5.1 family of chips designed for high-end gaming, audio, industrial and IoT markets. The family currently consists of IW620 and IW620S parts with respectively PCIe and SDIO host interfaces. Both chips integrate dual-band Power Amplifiers (PAs), Low Noise Amplifiers (LNAs), and switches in order to reduce the board-level BOM (Bill of Materials). IW62X key features and specifications: Wi-Fi 6 (802.11ax) 2×2 Wi-Fi 6 DB (802.11ax) 1024 QAM, 80MHz Peak Throughput: 1.2 Gbps Improved wideband noise & MU-MIMO performance Advanced active channel scanning 802.11s, EasyMesh 802.11mc Bluetooth & Bluetooth Low Energy 5.1 BLE 2Mbps + Long Range BLE direction finding with Angle of Arrival (AoA) and Angle of Departure (AoD) BLE Mesh Antenna support 2×2 5G 1×1 2.4G + BT Multimode energy-efficient support (TWT, Micro AP, TX Power Control, Wi-Fi Direct, BT5.1) Host Interfaces IW620 – PCIe 1.0 IW620S – SDIO 3.0 […]

September 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

3µA/MHz Ambiq Apollo 4 MCU Targets Battery-powered IoT Devices with Voice Processing

Ambiq Micro is using sub-threshold voltages under 0.5V to offer ultra-low-power Arm microcontrollers. In 2015, the company launch the Apollo Cortex-M4F MCU with 30µA/MHz power consumption in active mode, which was followed in 2016 by Apollo 2 in consuming just 10µA/MHz, and Apollo 3 (Blue) dropped power consumption to as low as 6µA/MHz against using a Cortex-M4F @ 48 MHz in active mode. The fourth generation of ultra-low-power Apollo microcontroller has now been announced with Apollo 4 and Apollo 4 Blue microcontrollers – the latter adding Bluetooth – halving the power consumption of Apollo 3 at just 3µA/MHz, or ten times less than the original ultra-low-power MCU from the company. Apollo 4 (Blue) specifications and key features: MCU Core – Arm Cortex-M4F core up to 192 MHz (TurboSPOT) with FPU, Memory Protection Unit (MPU), and Secure Boot GPU – 2D/2.5D graphics accelerator with full alpha blending, texture and frame buffer […]

September 14, 2020September 14, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Silicon Labs Introduces Bluetooth 5.2 BGM220S SiP and BGM220P PCB Module

Silicon Labs has recently announced two hardware modules based on the company’s BG22 secure Bluetooth 5.2 SoC, namely BGM220S System-in-Package (SiP) measuring just 6x6mm, and BGM220P, a slightly larger PCB variant optimized for wireless performance along with a better link budget for greater range. Both modules can be integrated into products with up to 10-year battery life from a single coin cell. All BGM220S/P variants can support Bluetooth Direction Finding and some of the parts can also handle Bluetooth Mesh Low Power protocol. Silicon Labs BGM220S/P key features: Wireless SoC – Silicon Labs EFR32BG22 Arm Cortex-M33 with DSP instructions and floating-point unit, up to 512 kB Flash, 32 kB RAM, 2.4 GHz radio with TX power up to 8 dBm, and Embedded Trace Macrocell (ETM) for advanced debugging Supported Protocols Bluetooth Low Energy (Bluetooth 5.2) Direction-finding Bluetooth mesh Low Power Node Various MCU peripherals include ADC, up to 25x GPIOs, […]

September 5, 2020September 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

M5StickC PLUS ESP32-PICO Devkit Comes with 1.14-inch LCD, 120 mAh Battery and Buzzer

M5StickC PLUS ESP32-PICO DevKit Bluetooth and WiFi

Shortly after introducing the Core2 ESP32 IoT Development Kit with a 2-inch touch display, 390 mAh battery earlier this week, M5Stack has announced the availability of another ESP32 WiFi & Bluetooth IoT devkit, with the more compact M5StickC PLUS featuring a 1.14-inch display, a 120mAh battery, motion, sensor, a buzzer and the usual Grove connector for expansion. M5StickC PLUS is an upgrade to the original M5StickC that lacks the buzzer and features a smaller 0.96-inch display and a lower capacity 96 mAh battery. The new model can be purchased now for $13.95 plus shipping on Aliexpress, while the original device, that happens to be M5Stack top-selling product, is still available for $9.95. M5StickC PLUS key features and specifications: SiP – Espressif Systems ESP32-PICO-D4 system-in-package with ESP32 dual-core WiFI and Bluetooth IoT processor @ up to 240 MHz, 4MB SPI flash Display – 1.14-inch Color TFT LCD with 135×240 resolution (ST7789v2 […]