blu-ray News - CNX Software - Embedded Systems News

June 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Dune HD RealBox 4K TV Box Runs Android and Linux on Realtek RTD1395 SoC

Realtek RTD1395 processor is designed for 4K HDR TV boxes and set-top boxes. Equipped with a quad-core Cortex-A53 processor and Mali-470 GPU it offers a lower-cost alternative to Realtek RTD1295 and RTD1296 with the same 4K video processing and playback capabilities. So far, we had seen it in TV boxes designed for operators and Banana Pi BPI-M4 single board computer, but Dune HD RealBox 4K TV box is the first RTD1395 consumer device sold directly to end-users. Dune HD RealBox 4K specifications: SoC – Realtek RTD1395 quad-core Cortex-A53 processor with Mali-470MP4 GPU System Memory – 2 GB RAM Storage – 16 GB flash, MicroSD card slot Video Output – HDMI 2.0a up to 4Kp60 HDR and AV port (composite) Audio – Optional S/PDIF, analog stereo audio via AV port, digital audio via HDMI port; HDMI audio pass-through to AV receiver Video Playback 4Kp60 HDR/HDR10+ with 10-bit H.265 and VP9 profile-2, […]

April 13, 2019April 29, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Zidoo Z1000 4K Android Media Player to Feature Realtek RTD1296DD Processor

Zidoo previously introduced several Reatek RTD1296 4K Android media players with their high-end Zidoo X20/X20 Pro models, followed by the lower cost Zidoo Z9S & Z10 units. The company is now about to launch yet another model based on the processor with Zidoo Z1000 4K UHD media player that should offer an option between the higher-end models and the company’s entry-level options. Zidoo Z1000 specifications: SoC – Realtek RTD1296DD quad core Cortex A53 processor with Arm Mali-T820 MP3 GPU System Memory – 2 GB RAM Storage – 16 GB eMMC flash, 1x SATA 3.0 bay for 2.5 or 3.5″ drive, 1x external SATA port Video 1x HDMI 2.0a output up to 4K @ 60 Hz with HDR10 support 1x HDMI 2.0 input supporting PiP, stream recording, and UDP broadcasting 1x RCA composite output Decode – HDR10, 10-bit HEVC / H.265 up to 4K @ 60fps, VP9 up to 4K @ […]

December 13, 2017May 20, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

HiMedia Q10 Pro 4K TV Box Review – Part 2: Full Blu-ray Navigation & Playback

HiMedia Q10 Pro is an Android TV box powered by HiSilicon Hi3798CV200 SoC that was launched in March 2016, but the company recently provided a firmware update with support for Full Blu-ray navigation, and asked me to review that part. I received the device last month, posted the first part of the review with HiMedia Q10 Pro unboxing, and also explained how to install a 3.5″ SATA drive at the time. I’ve now acquired a few Blu-ray RIPs in order to test 4K Blu-ray video playback and navigation specifically. Initial Setup, Firmware Update, and Copying 4K Blu-ray Videos to the Hard Drive I connected the TV box to Onkyo TX-NR636 AV-Receiver, itself connected to LG 42UB820T 4K UHD television. If you’ve ever owned an HiMedia TV box the Android launcher should be familiar. If you want more details about the launcher, and user interface, checkout my HiMedia Q30 review. It’s […]

November 8, 2017August 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

HiMedia Q10 Pro TV Box Review – Part 1: Unboxing and 3.5″ SATA Bay

HiMedia Q10 Pro Android TV box was launched in March of last year, equipped with a HiSilicon Hi3798CV200 quad-core ARM Cortex A53 processor, 2GB RAM, 16GB flash, and a SATA bay for 3.5″ drives. When I wrote a post about the Best Android TV boxes, on commenter mentioned that while NVIDIA Android Shield was the best box for streaming, he felt HiMedia Q10 Pro offered the best quality for media playback. With now 18 months since launch, you may wonder why I would do a review now. That’s because Himedia keeps updating the firmware, and they asked me to check out and test their latest feature: 4K Blu-Ray navigation on Android 7.0 OS. As usual, I’ll start by checking out the hardware, and will publish a review focusing on Blu-ray playback in a few weeks. The package is more like a suitcase that your usual tiny box, but that’s common […]

April 11, 2017April 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Zidoo X10 Android & OpenWrt TV Box with 3.5″ SATA Bay Sells for $229

Zidoo has sold two TV boxes based on Realtek RTD1295 so far with Zidoo X9S and Zidoo X8, and the company has done a pretty good job based on my review of Zidoo X9S. Both models run Android 6.0 with HDMI input recording and broadcasting functions, as well as OpenWrt for NAS functions, with X8 model relying on USB 3.0 storage, and X9S adding an external SATA port. It would be nice to have a model with an internal SATA bay, and it’s exactly what Zidoo X10 brings to the table. Zidoo X10 specifications with highlights in bold showing differences with Zidoo X9S: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot up to 32GB + SATA 3.0 bay for 3.5″ hard drives Video I/O – HDMI 2.0a output up to […]

March 24, 2016March 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

ViXS Xcode 6800 Series Processors Support 4K 12-bit HEVC with HDR, VIDITY DRM

Now that 4K televisions are becoming more and more common, and 4K content is starting to be available via satellite (DVB-S2), online (Netflix, Amazon..), and off-line via UHD blu-ray discs, a new consumer initiative has been launched by the UHD Alliance. The UltraHD Premium logo will allow consumers to make sure their new 4K television also supports specific performance metrics for resolution, high dynamic range (HDR), peak luminance, black levels and wide color gamut. many of these new features will allow requires new content, and set-top box beside the compliant television. ViXS Xcode 6800 dual core Cortex-A9 dual-core processor will meet the requirement with a 4K 12bit HEVC (Main12) 60 fps video decoder, HDR Tone Mapping engine, HDMI 2.0a, and more. Some of the key features of ViXS Xcode 6800 processor: CPU – Dual core ARM Cortex A9 processor GPU – 3D graphics engine compliant with OpenGL-ES 2.0 and OpenGL-ES […]

January 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MediaTek MT8581 Media Processor Supports 4K UHD Blu-rays, 10-bit H.265, VP9, and HDR Imaging

Mediatek has unveiled MT8581 processor for UHD Blu-ray players at CES 2016, with support the latest 10-bit H.265 and VP9, as well as High Dynamic Range (HDR) for better video quality. The press release provides limited info, but I found a temporary? page with more details (screenshot), and MT8581 specifications should be as follows: CPU – Quad core ARM Cortex A53 processor GPU – N/A, but could be ARM Mali-820MP2 according to AndroidPC.es Optical Disks support – Blu-ray, DVD and CD playback, including the latest BD-ROM format, such as BD-Live and BonusView. When combined with MT8577A Video Codecs – HEVC/H.265 10-bit, H.264 and VP9 Profile 2, Ultra HD 60p video decoder (3840×2160), MPEG-1/2/4, VP8 and VC-1 for Full HD 60p. Encode: H.265 and H.264. High Dynamic Range – HDR10 open standard and Dolby Vision IP Audio – AAC, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, and DTS HD Network […]

April 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Kodi 14.2 Final and Kodi 15 Alpha 2 Released

Kodi developers have recently announced two release for Kodi: the stable version of Kodi 14.2 Helix, which should be the last Kodi 14 release, and Kodi 15 Alpha 2 Isengard with some interesting new features. Since Kodi 14.2 is a minor release, no new features have been added, but they fixed several bugs: Application stopped responding on Windows Gap-less playback on MP3 Playback of rtmp protocol Scanning of newly added episodes Fix multipath source scanning Loading external subtitles in some cases packaging of PIL module on Android. This fixes some script error when using weather add-on Fix video playback on all platform after refresh rate change Various bugs that were present in PVR add-ons. Save weather location Fix filtering of foreign add-ons ftps handling Use LastWrite instead of ChangeTime for file system on Windows As usual, you can download the release via Kodi download page for Windows, Linux. Mac OS […]