benchmarks News - Page 11 of 16 - CNX Software

December 30, 2022 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Khadas VIM1S review – Ubuntu 22.04 tested on an Amlogic S905Y4 SBC

In this review of Khadas VIM1S SBC, we’ll install Ubuntu 22.04, and report our experience testing the performance such as memory speed and eMMC flash performance, and 3D graphics capabilities. Installing Ubuntu 22.04 on Khadas VIM1S Just like Khadas VIM4 and Edge2, the Khadas VIM1S SBC ships with the OOWOW firmware that allows easy installation of operating systems by downloading the images, and flashing them directly to the eMMC flash. You need just to connect a monitor and a USB keyboard and have an Internet connection through either LAN or Wi-Fi. Let’s start by installing Ubuntu 22.04 on Khadas VIM1S together. If no OS is installed, OOWOW will boot automatically, but if there’s already another OS installed, you can press and hold the Function button, press the Reset button, and release the Function button. After a few seconds, the OOWOW Wizard as shown in the picture below should show up. […]

December 6, 2022December 6, 2022 by Ian W MORRISON (Linuxium) - 5 Comments

MeLE PCG02 Pro Review – A Fanless Intel Celeron J4125 / N5105 mini PC with an ultra-compact form factor

MeLE has launched a new ‘stick’ mini PC called the PCG02 Pro. It comes in two models featuring either a mobile Gemini Lake Refresh or a Jasper Lake processor. Both models appear physically similar however the memory, WiFi, Bluetooth, and USB ports differ plus only the lower-powered model includes an M.2 NVMe or SATA slot. MeLE kindly sent both models for review and I’ve looked at the performance running both Windows and Ubuntu. MeLE PCG02 Pro hardware overview The MeLE PCG02 Pro physically consists of a 146 x 61 x 20mm (5.75 x 2.40 x 0.79 inches) rectangular plastic case that ‘wraps’ around a plastic inner frame. The outside of the case has a knurled or cross-hatched pattern (engineered to provide high thermal conductivity) and the inner frame has the WiFi antennas glued to it. As passively cooled mini PCs, the first model known as the PCG02 Pro J4125 uses […]

November 12, 2022March 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

NanoPi R6S Review – Part 1: Unboxing, Teardown, OpenWrt 22.03, and iperf3

NanoPi R6S is a Rockchip RK3588S powered device that can not only work as a router with two 2.5GbE ports, but also as a mini PC with HDMI and USB ports, and an Edge AI computer thanks to the 6 TOPS NPU found in the processor. FriendlyElec has just sent me two samples of the NanoPi R6S for review. Today, I’ll start with an unboxing, a teardown, and install OpenWrt 22.03 to run some iperf3 benchmarks. I’ll try other features with either Debian or Ubuntu Desktop in a few weeks. NanoPi R6S unboxing The router/mini PC ships with 6 rubber feet (3M), and nothing else. The front panel comes with four LEDs for the system and Ethernet ports, a USB 2.0 port and a USB 3.0 port, as well as an IR receiver “window” (under the USB 3.0 port). The rear panel includes a USB Type-C port that supports 5V […]

November 10, 2022November 10, 2022 by Ian W MORRISON (Linuxium) - 2 Comments

Weibu N10 Review – An OEM Mini PC tested with Ubuntu 22.04, Windows 11

Weibu is a B2B company offering total solutions and OEM/ODM services. Their target clients are computer manufacturers like Acer and Hisense as they don’t sell directly to end users. With their products both the specifications and accessories can be customized according to their customer’s requirements. One of their product lines is mini PCs and they have sent a pre-production sample of their N10 design to showcase their capabilities. In this review, I will look at the various options available for the N10 and briefly look at performance running both Windows and Ubuntu. Weibu N10 hardware overview The key selling feature of this mini PC is the wide range of ports suitable for commercial/industrial usage together with various options for the processor. The N10 is an actively cooled mini PC and the device is 145 x 128 x 54mm (5.71 x 5.04 x 2.13 inches) large with a metal top that […]

November 6, 2022November 7, 2022 by Ian W MORRISON (Linuxium) - 16 Comments

Beelink SEi12 Alder Lake mini PC review with Windows 11, Ubuntu 22.04

Beelink have launched their first Intel Alder Lake mini PC calling it the SEi12. Featuring a mobile 12th gen Core-i5-1235U processor it is also their first mini PC to incorporate a PCIe4 NVMe slot. Beelink kindly sent one for review and I’ve looked at the performance running both Windows 11 and Ubuntu 22.04. Beelink SEI12 hardware overview The Beelink SEi12 physically consists of a 126 x 113 x 42mm (4.96 x 4.45 x 1.65 inches) square metal case with a new and innovative waterproof fabric-covered top. As an actively cooled mini PC, it uses Intel’s Alder Lake Core i5-1235U processor which has a thread count of 12 with 2 ‘performance’ cores boosting to 4.40 GHz and 8 ‘efficient’ cores boosting to 3.30 GHz and includes Intel’s Iris Xe Graphics. The front panel has an illuminated power button, a 3.5mm headphone jack, a data-only Type-C USB 3.1 port, dual USB 3.1 […]

October 18, 2022December 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

UP 4000 x86 SBC review with Ubuntu 22.04

The UP 4000 is a credit-card / Raspberry Pi-sized single board computer based on an Intel Apollo Lake processor. AAEON sent me the model with an Intel Atom x7-E3950 quad-core processor, 4GB RAM, and a 64GB eMMC flash, and in the first part of the review, I installed Ubuntu 22.04 since the board would initially only boot to the UEFI shell out of the box. I’ve now spent more time with the board, and in this article, I will report my experience with the UP 4000 SBC running Ubuntu 22.04 checking out features, performance, video playback, power consumption, and so on. Ubuntu 22.04 System info Let’s check out some information after I’ve upgraded the system to the latest packages:

jaufranc@UP-4000-CNX:~$ lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 22.04.1 LTS
Release:	22.04
Codename:	jammy
jaufranc@UP-4000-CNX:~$ uname -a
Linux UP-4000-CNX 5.15.0-48-generic #54-Ubuntu SMP Fri Aug 26 13:26:29 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
jaufranc@UP-4000-CNX:~$ inxi -Fc0
System:
  Host: UP-4000-CNX Kernel: 5.15.0-48-generic x86_64 bits: 64
    Console: pty pts/1 Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
Machine:
  Type: Desktop Mobo: AAEON model: UP-APL03 v: V1.0
    serial: <superuser required> UEFI: American Megatrends v: UPAPBM11
    date: 07/01/2022
CPU:
  Info: quad core model: Intel Atom E3950 bits: 64 type: MCP cache: L2: 2 MiB
  Speed (MHz): avg: 1099 min/max: 800/2000 cores: 1: 1109 2: 1009 3: 1114
    4: 1165
Graphics:
  Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated
  Graphics
    driver: i915 v: kernel
  Display: server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:
    loaded: modesetting unloaded: fbdev,vesa gpu: i915 tty: 80x24
    resolution: 1280x800
  Message: GL data unavailable in console. Try -G --display
Audio:
  Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
    driver: snd_hda_intel
  Sound Server-1: ALSA v: k5.15.0-48-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 00:07:32:a2:cd:17
Drives:
  Local Storage: total: 58.24 GiB used: 12.69 GiB (21.8%)
  ID-1: /dev/mmcblk0 vendor: SanDisk model: DA4064 size: 58.24 GiB
Partition:
  ID-1: / size: 56.53 GiB used: 12.68 GiB (22.4%) fs: ext4
    dev: /dev/mmcblk0p2
  ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat
    dev: /dev/mmcblk0p1
Swap:
  ID-1: swap-1 type: file size: 3.96 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
  System Temperatures: cpu: 6280.4 C mobo: N/A
  Fan Speeds (RPM): cpu: 6553500
Info:
  Processes: 215 Uptime: 2h 20m Memory: 3.68 GiB used: 1.09 GiB (29.5%)
  Init: systemd runlevel: 5 Shell: Bash inxi: 3.3.13

jaufranc@UP-4000-CNX:~$ lsb_release -a

No LSB modules are available.

Distributor ID: Ubuntu

Description: Ubuntu 22.04.1 LTS

Release: 22.04

Codename: jammy

jaufranc@UP-4000-CNX:~$ uname -a

Linux UP-4000-CNX 5.15.0-48-generic #54-Ubuntu SMP Fri Aug 26 13:26:29 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

jaufranc@UP-4000-CNX:~$ inxi -Fc0

System:

Host: UP-4000-CNX Kernel: 5.15.0-48-generic x86_64 bits: 64

Console: pty pts/1 Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)

Machine:

Type: Desktop Mobo: AAEON model: UP-APL03 v: V1.0

serial: <superuser required> UEFI: American Megatrends v: UPAPBM11

date: 07/01/2022

CPU:

Info: quad core model: Intel Atom E3950 bits: 64 type: MCP cache: L2: 2 MiB

Speed (MHz): avg: 1099 min/max: 800/2000 cores: 1: 1109 2: 1009 3: 1114

4: 1165

Graphics:

Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated

Graphics

driver: i915 v: kernel

Display: server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:

loaded: modesetting unloaded: fbdev,vesa gpu: i915 tty: 80x24

resolution: 1280x800

Message: GL data unavailable in console. Try -G --display

Audio:

Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster

driver: snd_hda_intel

Sound Server-1: ALSA v: k5.15.0-48-generic running: yes

Sound Server-2: PulseAudio v: 15.99.1 running: yes

Sound Server-3: PipeWire v: 0.3.48 running: yes

Network:

Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet

driver: r8169

IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 00:07:32:a2:cd:17

Drives:

Local Storage: total: 58.24 GiB used: 12.69 GiB (21.8%)

ID-1: /dev/mmcblk0 vendor: SanDisk model: DA4064 size: 58.24 GiB

Partition:

ID-1: / size: 56.53 GiB used: 12.68 GiB (22.4%) fs: ext4

dev: /dev/mmcblk0p2

ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat

dev: /dev/mmcblk0p1

Swap:

ID-1: swap-1 type: file size: 3.96 GiB used: 0 KiB (0.0%) file: /swapfile

Sensors:

System Temperatures: cpu: 6280.4 C mobo: N/A

Fan Speeds (RPM): cpu: 6553500

Info:

Processes: 215 Uptime: 2h 20m Memory: 3.68 GiB used: 1.09 GiB (29.5%)

Init: systemd runlevel: 5 Shell: Bash inxi: 3.3.13

Everything looks good with an Intel Atom E3950 processor detected together with 3.68GB RAM and a 56.53GB rootfs EXT-4 partition. UP 4000 features testing There may also be some issues […]

October 12, 2022October 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 52 Comments

ODROID-H3 and ODROID-H3+ SBC’s feature Intel Celeron N5105, Pentium N6005 processor

There are now not one but two alternatives to the discontinued ODROID-H2+ SBC with the ODROID-H3 and ODROID-H3+ single board computers powered respectively by an Intel Celeron N5105 and Pentium N6005 Jasper Lake processor. Both new SBCs support up to 64GB RAM, significantly faster Intel UHD graphics, an M.2 PCIe Gen 3 socket, and keep the same port assignment with two 2.5GbE ports, two SATA ports, as well as two USB 3.0 and two US 2.0 ports. ODROID-H3/H3+ specifications: SoC ODROID-H3 – Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0GHz / 2.9GHz (Turbo) with 24EU Intel UHD graphics @ 450 / 800 MHz (Turbo); 10W TDP ODROID-H3+ – Intel Pentium N6005 quad-core Jasper Lake processor @ 2.0GHz / 3.3GHz (Turbo) with 32EU Intel UHD graphics @ 450 / 900 MHz (Turbo); 10W TDP System Memory – Dual-channel SO-DIMM DDR4 memory (2933MT/s) supporting up to 64GB RAM in total Storage […]

October 4, 2022October 11, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Khadas Edge2 review with Android 12

We’ve already reviewed Khadas Edge2 Pro with Ubuntu 22.04, and I’ve now had time to test the ultra-thin Rockchip RK3588S SBC with Android 12, so I’ll report my experience checking out the features, running some benchmarks, playing videos and games, etc… Flashing Android 12 to Khadas Edge2 board Our board was running Ubuntu 22.04, so in order to enter OOWOW firmware system, I had to keep pressing the function key (middle), then shortly press the reset button, before releasing the function key and entering the OOWOW interface. We can see the Android 11 image from the list we saw last month is gone for good, and a new Android 12 image dated September 20, 2022 is available. I selected that one, and OOWOW downloaded the files and flashed it to the board. Within five minutes, Android 12 was up and running on the board. As somebody who had spent several […]