benchmark News - Page 25 of 51 - CNX Software

April 21, 2016 by Karl Johnson - 5 Comments

Matricom G-Box Q2 Android TV Box Review

Another guest review from Karl, this time, with Matricom G-Box Q2 Android 5.1 TV box based on Amlogic S812 processor. First Impressions Today I will be reviewing the G-Box Q2 by Matricom. This is a follow up device to the popular G-Box Q. The first day I plugged it in and did some basic first impressions I thought it was laggy…..but after using it and setting up the way I am accustomed to using it…I found it very fast and responsive. From the time power is applied to launcher is loaded is about 33 seconds. The software seems solid and I ran into only minor issues. It got very respectable scores between 38000 and 42000 on Antutu. The box does have a lot of software that I am not a fan of, but these can be easily uninstalled. The launcher that comes with it is ok but I prefer a […]

April 20, 2016April 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Android and Linux Benchmarks on MiQi Development Board

MiQi is an upcoming low cost development board powered by Rockchip RK3288 SoC that will sell for $35 with 1GB RAM and 8GB storage, and $69 for the version with a 2GB / 32GB combination. Since Rockchip RK3288 was launched in 2014, most available benchmarks were made on Android 4.4, and since MiQi is the first low cost board based on the processor, other RK3288 based board such as FireFly have not been that popular. So I’ve decided to run updated benchmarks in MiQi both in Android 5.1 and Linux (Lubuntu 14.04), which was easy since a dual boot image is pre-installed. But since I received an early sample without heatsink, I found a spare heatsink added some thermal paste and placed it on top of the processor and partially on RAM and eMMC flash. MiQi Board Android 5.1 Benchmarks I ran Antutu both using 1080p60 and 2160p30 video output, […]

April 15, 2016April 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Software Matters, or How SinoVoIP Crippled Banana Pi M2+ Performance.

The most common way to use a development board is to simply go to the manufacturer website, and download the images from there. They are the ones who made the hardware after all, and they should be the most knowledgeable about their platform. But it may not always be true as tkaiser found out when he ran some Phoronix benchmarks on Banana Pi M2+ (aka BPI M2+) board with SinoVoIP (the manufacturer), Armbian, and Raspbian images. The results speak for themselves. The last three columns are what is of interest here, and in some benchmark Banana Pi M2+ is about 3 times slower with SinoVoIP image compared to Armbian, while with others the performance is quite similar. John The Ripper password cracker benchmark shows a massive difference between distributions… … while FLAC audio encoding not so much. So what’s going on here? First Jon the Ripper is a multi-threaded applications, […]

April 13, 2016May 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Windows Subsystem for Linux (Ubuntu Bash on Windows) Benchmarked Against Native Ubuntu 14.04 and 16.04

Microsoft recently announced that they brought Ubuntu userspace to Windows, and that this features will be officially released in Windows 10’s Anniversary Update and called Windows Subsystem for Linux. But people part of the company’s insider program can already try the beta version of “Bash on Windows”, and Phoronix ran some benchmarks in bash in Windows 10, and repeated the tests in Ubuntu 16.04, Ubuntu 14.04, and Clear Linux. The test machine was based on an Intel Xeon E3-1280 v5 Skylake CPUwith 16GB of RAM and 120GB Samsung 850 EVO SSD. Many of the results show Windows Subsystem for Linux (I’ll just call it Windows 10 in the rest of the post) just performing a little slower than on the Linux distributions, but there are also some outliers, which I’m going to cover here. The most surprising results is when Windows 10 clearly outperforms Linux at its own game which […]

April 12, 2016April 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Xiaomi Mi Box 3 Enhanced / Pro (Mediatek MT8693) Benchmarks and System Info

Xiaomi Mi Box 3 Enhanced is the first TV Box I’ve tested with a processor featuring ARM Cortex A72 cores, so I’m very eager to see how its performs, and I’m expecting it to be quite faster than Rockchip RK3288, but still not quite matching Nvidia Tegra X1 processor found in Nvidia Shield Android TV box. But first let’s check the system information with CPU-Z app. First, it looks like CPU-Z does not detect big.LITTLE processor very well, as it detect a six core ARM Cortex-A72, instead of a six core processor with two Cortex A72, and four Cortex A53 cores. The clock speed ranges between 507 MHz and 1.57 GHz, but that’s likely the number for the Cortex A53 core, as the marketing materials report the Cortex A53 cores run at up to 1.6 GHz, and the Cortex A72 cores up to 2.0 GHz. Antutu info reports the frequency […]

April 11, 2016April 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Zidoo X1 II 4K Android TV Box (Rockchip RK3229) Review

After skipping MXQ-4K TV box review due to severe issues with video playback, Zidoo X1 II is actually the first device powered by Rockchip RK3229 processor that I’ve fully tested. I’ve already taken pictures of the box, and opened it up to check the board in Zidoo X1 II unboxing and teardown post, and confirmed 4K videos could play pretty well from my USB hard drive using Zidoo Media Center after disabling Media Scanner process. So today, I’ll review other parts of the firmware, as well as video playback with ZDMC 16.0, Zidoo’s fork of Kodi 16.0. First Boot, Settings and First Impressions The device only has two USB ports, and I used one for a USB hard drive, and the other for RF dongles for MINIX NEO A2 Lite air mouse, a USB keyboard, and the RF dongle for Tronsmart Mars G01 gamepad via a USB hub. I also […]

April 5, 2016April 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Review of U4 Quad Hybrid Android Set-top box with DVB-T2/C and DVB-S2 Tuner

U4 Quad Hybrid is an Android 4.4 satellite, cable and terrestrial TV receiver powered by HiSilicon Hi3796M V100 quad core Cortex A7 supporting video decoding for H.264 and H.265 up to 4K @ 30 Hz. I’ve already taken a few pictures of the device and the board and tuner, shown how to easily configure another device or computer to stream live TV from this Android TV box, so today, I’ll write more about the Android and DVB parts both in terms of features and performance in the full review. First Boot, Settings and First Impressions I’ve started by connecting USB peripherals and cables: USB 3.0 hard drive to USB 3.0 port, USB keyboard, and RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, as well as Ethernet and HDMI cables, and the terrestrial and satellite antenna cables. The DVB-T2 connector is using an F-connector, so […]

April 2, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Low Cost Development Boards Linux Benchmarks – Raspberry Pi vs Banana Pi vs Orange Pi vs ODROID

LoveRPi, a distributor and reseller of electronic boards and accessories, has run benchmarks from the Phoronix Suite on several low cost development boards: $46* Banana Pi M2 based on Allwinner A31s quad core Cortex A7 processor @ 1.0 GHz with Armbian (Ubuntu 14.04) $74* Banana Pi M3 based on Allwinner A83T octa core Cortex A7 processor @ 1.80 GHz with Debian 8.3 $32 ODROID-C1+ based on Amlogic S805 quad core Cortex A5 processor @ 1.5 GHz with Ubuntu 14.04 $40 ODROID-C2 based on Amlogic S905 quad core Cortex A53 processor @ 2.0 GHz with Ubuntu 16.04 $74 ODROID-XU4 based on Samsung Exynos 5422 quad core ARM Cortex-A15 @ 2.0GHz quad core ARM Cortex-A7 @ 1.4GHz with Ubuntu 15.10 $10 Orange Pi One based Allwinner H3 Cortex A7 processor @ 1.2 GHz with Armbiam (Debian 8.3) $15 Orange Pi PC based on Allwinner H3 Cortex A7 processor @ 1.3 GHz with […]