benchmark News - Page 22 of 51 - CNX Software

September 9, 2016September 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Zidoo X9S Realtek RTD1295 Android & OpenWrt TV Box System Info & Benchmarks

Zidoo X9S is the first Android TV box based on Realtek RTD1295 quad core Cortex A53 processor that I’ve received for review. So in this post, I’ll show some system information with CPU-Z, and Android & OpenWrt Settings, and run typical Android benchmarks such as Antutu 6.x, Vellamo, and 3Dmark. Zidoo X9S / Realtek RTD1295 Android System Info CPU-Z detects Realtek RTD1295 is a quad core ARM Cortex A53 processor clocked between 600 MHz and 1.4 GHz with an ARM Mali-T820 GPU, and uses an unknown governor… But in adb shell, tje command “cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor” reports an ondemand governor is used. The system runs Android 6.0.1 on top of Linux 4.1.17 (I think it’s the first time I see a Linux 4.x kernel used in a TV box…), and with 1920×1080 resolution. Total RAM is shown to be 1672 MB, most probably because some RAM is reserved for the GPU […]

September 8, 2016September 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

MINIX NEO Z83-4 mini PC Review – Part 2: Windows 10 and Benchmarks

I’ve listed specifications and posted photos of MINIX NEO Z83-4 mini PC in the first part of review, and while NEO Z83-4 is yet another Intel Atom x5-Z8300 device, it’s clear the company has made specific efforts for the thermal design with a large heatsink and aluminum bottom cover, and provided a solid 12V/3A power supply. So in the second part of the review, I’ll check how Windows 10 performs in the device, and run some benchmarks to compare it to other low power Intel mini PCs. MINIX NEO Z83-4 Setup & System Information If you’ve connected USB mouse and keyboard, HDMI and Ethernet, a USB 3.0 hard drive to the USB 3.0 port, and the power cord. Pressing the power button on the right side will boot the device. A typical boot will take around 30 seconds to the desktop. My system was already configured with Z83-4 user, possibly […]

September 4, 2016September 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Coowell V4 Android TV Box Review – Part 2: Camera, Skype, Google Hangouts and Duo

Coowell V4 Android TV box is based on Rockchip RK3368 octa-core processor with 2GB RAM, and 16GB flash, and also includes a camera. In part 1 of Coowell V4 review, I have already taken photos of the device, and torn down the device to have a closer look at the board, and the camera which is based on a GC2145 2MP image sensor. Today, I’ll mostly test the camera and microphone, including firmware compatibility with Skype, Google Hangouts, and the latest Duo by Google app. Finally, it’s been a while since I’ve tested a RK3368 TV box, so I’ll run CPU-Z and Antutu again. Coowell V4 Hardware Setup and Launcher Coowell V4 hardware setup is pretty usual, and I connect an Ethernet port, and the USB RF dongle for MINIX NEO A2 Lite air mouse, as well as a USB keyboard to take screenshots. However, while normally I’d use my […]

August 31, 2016September 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Review of Vernee Apollo Lite Smartphone with Mediatek Helio X20 SoC – Part1: Unboxing, First Boot and Benchmarks

Vernee Apollo Lite is the little brother of Vernee Apollo, both based on Mediatek Helio X20 deca-core Cortex A72/A53 SoC, but with the Lite version having lower hardware specs otherwise, and being one of the few ARM Cortex A72 smartphones selling for less than $200 (at least in China). Tomtop, a Chinese online store, sent me a sample for review, and today, I’ll start by going through the tech specs, then check out the phone design and its accessories, and finally run a few benchmark, before posting a more detailed review in one or two weeks, where I’ll have more experience and feel about the phone. Vernee Apollo Lite Specifications I had posted some specs about the phone when it was first released, but they were incomplete at the time, and Vernee now released the full specs for their Apollo Lite: SoC – Meaitek Helio X20 (MT6797) deca-core processor with […]

August 29, 2016August 29, 2016 by Karl Johnson - 15 Comments

Tanix TX5 Pro TV Box Review – Part 2: Modding and Testing

Karl here with part 2 of Tanix TX5 Pro TV box. In the first part we peaked inside took a look at the specs and quick look at the UI. In part 2, we will get into the nitty gritty. When I first received the box there were several issues: Play Store incompatibility, issue with language reverting to Chinese, and green screen on YouTube. Tanix quickly followed up with an update and resolved these issues. Stuck in my ways So I have to admit that I am pretty stuck in my ways when it comes to the way I use Android. It started long ago with my first stick the MK808 with Rockchip Rk3066. It was basically the phone version of Android on the TV and I really liked it. We have come a long way since then and some changes have occurred in the box market UI, like the […]

August 28, 2016August 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 165 Comments

Amlogic S905, S905X, and S912 Processors Appear to be Limited to 1.5 GHz, not 2 GHz as Advertised

When I compared the performance Amlogic S905 and Rockchip RK3368 processors last year, I noticed Amlogic S905 single thread performance not being much faster than the one of Rockchip RK3368, despite the former allegedly clocked at 2.0 GHz against the latter 1.2 GHz. But early this month one member (koschi) on ODROID forums started a thread entitled “No performance difference between 1.5, 1.75 & 2GHz” about ODROID-C2 board. The first post link to Ant-computing website about choosing a processor for a build farm, and one of the tables comparing various ARM and x86 processors with the claim that Amlogic S905 was listed to 1.536 GHz, because “the device claims to run at 2.016 GHz but the kernel silently ignores frequencies above 1.536 GHz!” So koschi did his own tests with 7z and sysbench, using cpufreq-set -u $FREQ to set a fixed frequency between test, and could confirm the issue:

7z b, total MIPS
kHZ   MIPS   
100000   221   
250000   605   
500000   1252   
1000000   2488   
1296000   3182   
1536000   3705   
1752000   3691   
2016000   3682   
   
avg. of 3 x sysbench --num-threads=4 --test=cpu run
kHZ   seconds @4threads   seconds @1threads

7z b, total MIPS

kHZ MIPS

100000 221

250000 605

500000 1252

1000000 2488

1296000 3182

1536000 3705

1752000 3691

2016000 3682

avg. of 3 x sysbench --num-threads=4 --test=cpu run

kHZ seconds @4threads seconds @1threads

[…]

August 24, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

M12N Amlogic S912 Octa-core TV Box Review – Part 2: Android 6.0 Firmware

Shenzhen Shiningworth MXQ Plus M12N is one of the first TV box powered by Amlogic S912 octa-core processor also bringing a faster GPU, VP9 and HDR support compared to the earlier Amlogic S905 processor. I’ve already shown the device, its accesories, and its internal degisn in the first part of MXQ Plus M12N review, so today I’ll spend time reporting my finding testing features and performance with Android 6.0 firmware. Setup Wizard and First Impressions Since there are only two USB ports, I connected my USB hard drive to one, and used a USB hub to connect input devices including two RF dongles for an air mouse, and a gamepad, as well as a USB keyboard to take screenshots. I also added Ethernet and HDMI cable, and finally connected the power supply to boot it up. But as you can see from the picture the very first boot was not […]

August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

M12N Amlogic S912 TV Box Benchmarks

Since Shenzhen Shiningworth MXQ Plus M12N is my first TV box powered by Amlogic S912 octa-core processor, I’ve decided to write a separate post to show system information with CPU-Z, and benchmark results with Antutu 6.x, Vellamo 3.x, and 3Dmark Ice Storm Extreme. Please note that it may not be representative of all Amlogic S912 boards, as mentioned in the teardown post, there are some concerns about the thermal design of M12N TV box. M12N / Amlogic S912 System Info I’ve merged CPU-Z’ SOC, DEVICE and SYSTEM data into a single table. The app correctly detects an 8 core Cortex A53 processor @ 100 MHz to 2.02 GHz with an ARM Mali-T820 GPU. The brand for this particurlar device is MXQ, and Model m12n. Frame buffer resolution is 1920×1080, and memory and storage data are both OK for a box with 2GB and 16GB flash. The device runs Android 6.0.1 […]