benchmark News - Page 21 of 51 - CNX Software

November 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 117 Comments

R-Box Pro 3G Android TV Box Review – Part 2: Android 6.0 Firmware

The vast majority of octa-core Android TV Boxes sold on the market comes with 2GB RAM, but Amlogic S912 based R-Box Pro TV box was interesting with its 3GB RAM option (aka R-Box Pro 3G), as I wondered if I would see any noticeable improvements during my tests with the extra RAM. We’ve already confirmed the the hardware comes with 3GB RAM using 2x 1GB + 2x 512MB RAM chips configuration in the first part of the review last month, and it’s now time to check out whether this translates to anything in Android, as well as go through the usual hard-to-get features to work like automatic frame rate switching and HD audio pass-through. First Boot, Firmware Update, and First Impressions One positive with the device is the four USB ports, so this time I did not need an USB hub at all, and connected a USB HDD, two RF […]

November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rikomagic MK22 Review – Part 2: Android Firmware, Video & Audio in Kodi, Benchmarks…

Rikomagic MK22 is one of the many Android TV boxes powered by Amlogic S912 octa-core processor with typical hardware specifications such as 2GB RAM, 16GB flash, Gigabit Ethernet and dual band WiFi. I’ve already taken the box apart to check out the hardware in the first part of the review, so I’ll focus on the firmware, but I’ll keep it short focusing on typical problem areas, as I’ve already reviewed a bunch of other Amlogic S912 TV boxes such as Qintaix Q912 or Beelink GT1. First Boot, Firmware Update, and First Impressions After having connected all usual cables and accessories include a 1TB USB hard drive, and RF dongles for my air mouse and wireless gamepad, I booted the device, and after around 45 seconds (typically), I got to the main launcher. Since I received the device about a month ago, I decided to go to the UPDATE&BACKUP app to […]

October 24, 2016October 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Beelink GT1 TV Box Review – Part 2: Android Marshmallow Firmware

I’ve previously reviewed other Amlogic S912 TV boxes such as M12N MXQ Plus or Qintaix Q912, but Beelink GT1 has the advantage of being quite cheaper at $56 and up, but still come with many of the same features as more expensive devices. I’ve already posted pictures, and checked out the hardware design in the first part of Beelink GT1 review, so in the second part I’ll report my experience with Android, including video and audio capabilities, hardware features testing, and some benchmarks. First Boot, OTA Firmware Update, Settings, and First Impressions The device comes with two USB ports only, so I connected a USB hard drive to one of the port, and a USB hub to the other with the RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, as well as a USB keyboard to take screenshots. I completed the setup by adding […]

October 14, 2016October 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Zidoo X9S Android Media Center Review – Part 2: Android Firmware & OpenWrt (NAS Functions)

Zidoo X9S is more than a simple Android TV box, as it supports NAS function via OpenWrt running simultaneously with Android 6.0 and its USB 3.0 and SATA ports, as well as HDMI input function capable of recording and broadcasting videos, and supporting Picture-in-picture, so I find “Android Media Center” better fit the description for this device. I’ve already taken pictures of the Zidoo X9S and its board in the first part of the review, so I’ll test both Android 6.0 & OpenWrt firmware, and the most of the features in the second part of the review. Initial Setup and First Boot I connected the usual accessories and cables to the box including a USB 3.0 hard drive, HDMI and Ethernet cables, USB RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, and a USB keyboard to take screenshots. I also added a 1TB SATA […]

September 28, 2016September 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 51 Comments

Rockchip RK3399 Benchmarks Appear on GeekBench

Rockchip RK3399 hexa-core processor with ARM Cortex A72 and A53 cores and a Mali-T860MP GPU will soon be found in TV boxes, development boards, tablets, Chromebooks, virtual reality headset and more, and is widely expected to offer a significant performance boost against previous Rockchip processors, including RK3288, and outperform SoCs from competitors like Amlogic and Allwinner. We can have a first clue about the performance as Rockchip RK3399 boxes and one tablet are now showing up on GeekBench. The box is clocked at 1512 MHz, while the tablet is limited to 1416 MHz, but overall single-core score is about 1350 points, while multi-core score hovers around 2,550 points. I’m not that familiar with GeekBench so number don’t tell me anything. Let’s compare it against RK3288 which CPU-wise is the fastest processor I known of from Chinese silicon vendors targeting TV boxes. There’s a significant single-core performance boost (+73%), and lower […]

September 19, 2016January 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S905 vs Amlogic S912 Benchmarks Comparison

Amlogic has unveiled three new processors this year with Amlogic S905X, S912 and S905D. The latter is not found in devices yet, we’ve seen Amlogic S905X is a bit slower than Amlogic S905, but surely Amlogic S912 with eight Cortex A53 cores and its “multi-core high performance 3D GPU”, namely ARM Mali-T820MP3 must deliver a significant boost in performance. I now have full benchmarks results for two devices: M12N MXQ Plus and Qintaix Q912. M12N is the fastest devices of the two according to benchmarks, and I’ve been told YokaTV KB2 has about the same Antutu score (41K points) as M12N, so I feel confident enough that we have relevant benchmark’s results to compare Amlogic S912 and Amlogic S905 performance using M12N (MXQ Plus) and MINIX NEO U1 TV boxes. The comparison table below contains scores for Antutu 6.x, Vellamo 3.x, and 3DMark Ice Storm Extreme. MINI NEO U1 runs […]

September 18, 2016November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Qintaix Q912 Android Box Review – Part 2: Android 6.0, Kodi 17, Benchmarks, etc…

Qintaix Q912 is one of the many octa-core Android boxes based on Amlogic S912 processor. I’ve already shown photos of the device and its internal design in the first part of Qintaix Q912 review, so today I’ll report the results of my testing with Android firmware, video & audio capabilities in Kodi 17 Alpha 3 (pre-installed), features supports, benchmarks, and other comment. I will also be interesting to find out how it compares to M12N TV box, also based on Amlogic S912 processor. First Boot, Settings, and First Impressions I’ve connected all necessary cables including HDMI and Ethernet, added some USB devices including two 2.4 GHZ USB dongles for my air moues and wireless gamepad, a USB keyboard to take screenshots, and a USB 3.0 hard drive to the USB 2.0 ports of the device. Once you apply power, the LED is turn red, and you need to press the […]

September 11, 2016November 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Vernee Apollo Lite Helio X20 Smartphone Review – Part 2: Android 6.0 Firmware

I’ve already taken pictures and shown Antutu benchmark in the first part of Vernee Apollo Lite review, an Android 6.0 smartphone powered by Mediatek Helio X20 deca-core processor. Now that I’ve had time to play with the phone for over 10 days, I’ve ready to report my experience and write the second part of the review about performance, features, and issues I encountered with the phone. General Impressions First, the build quality feel pretty good, the phone is light and slim. I’ve only called once or twice, and voice quality was good, but I mostly use my phone over WiFi to browse the web, check emails, watch YouTube, and access social networks. More rarely, I also use GPS while running and during trip, and play some games. To be honest, the first few days did not work as expected, as many apps would either be much slower than last year […]