beagleboard News - Page 3 of 6 - CNX Software

November 7, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

openSUSE 12.2 for ARM is Now Available for Beagleboard, Pandaboard, Efixa MX and More

The first stable release of openSUSE for ARM has just been announced. openSUSE 12.2 for ARM is officially available for the Beagleboard, Beagleboard xM, Pandaboard, Pandaboard ES, Versatile Express (QEMU) and the rootfs can be mounted with chroot, but “best effort’ ports have been made for Calxeda Highbank server, i.MX53 Loco development board, CuBox computer, Origen Board and Efika MX smart top. Work is also apparently being done on a Raspberry Pi port which should be available for the next release. openSUSE developers explains that almost all of openSUSE builds runs on these platforms (about 5000 packages). Visit “OpenSUSE on your ARM board” for download links and instructions for a specific ARM board. More details are available on the wiki page. openSUSE has limited resources for ARM development, so If you’d like to help with development (e.g. fixing builds), visit ARM distribution howto page to find out how to get […]

August 30, 2012May 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Rowboat Releases Android 4.1.1 Jelly Bean for Beagleboard-XM and Beaglebone

Rowboat announced a preliminary version of Android 4.1.1 (Jean Bean) for beagleboard and beaglebone platforms last week. These releases support SGX (3D graphics acceleration) on both Texas Instruments Sitara AM37x processor (Beagleboard-XM) and AM335x processor (Beaglebone), and all download and build instructions are available on their Wiki: Jellybean On Beagleboard JellybeanOn Beaglebone – Tested with LCD7 cape. If you could not care less about building it yourself, Rowboat provides pre-built binaries that you can install on a micro-SD card (4GB and greater) as follows : For Beagleboard-XM (DVI output):

curl http://rowboat.googlecode.com/files/beagleboard-xm-jb.tar.gz &gt; beagleboard-xm-jb.tar.gz
tar -zxvf beagleboard-xm-jb.tar.gz
cd ~/beagleboard_xm-jb
sudo ./mkmmc-android.sh &lt;Your SD card device e.g:/dev/sdc&gt;

curl http://rowboat.googlecode.com/files/beagleboard-xm-jb.tar.gz > beagleboard-xm-jb.tar.gz

tar -zxvf beagleboard-xm-jb.tar.gz

cd ~/beagleboard_xm-jb

sudo ./mkmmc-android.sh <Your SD card device e.g:/dev/sdc>

For Beaglebone (with 7″ LCD Cape):

curl http://rowboat.googlecode.com/files/beaglebone-jb.tar.gz &gt; beaglebone-jb.tar.gz
tar -zxvf beaglebone-jb.tar.gz
cd ~/beaglebone-jb
sudo ./mkmmc-android.sh &lt;Your SD card device e.g:/dev/sdc&gt;

curl http://rowboat.googlecode.com/files/beaglebone-jb.tar.gz > beaglebone-jb.tar.gz

tar -zxvf beaglebone-jb.tar.gz

cd ~/beaglebone-jb

sudo ./mkmmc-android.sh <Your SD card device e.g:/dev/sdc>

The full source is available on rowboat gitorious account, but there are lots of repo over there, so the best way to get the source is probably the “repo init” instructions in the 2 links above. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as […]

August 16, 2012August 16, 2012 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Firefox OS Running on the Raspberry Pi

Oleg Romashin, a Nokia engineer, has been working on porting Firefox OS (previously known as Boot 2 Gecko) to the Raspberry Pi, and has uploaded a YouTube video showing a Firefox OS running on the device, including a WebGL teapot demo running at 60 fps. This Firefox OS build is based on Debian Squeezy, with plain EGL rendering, no Widget Toolkit backends and no X11. Some parts do not look very smooth yet, but this demo looks promising. If you want to try it yourself, you can download the WebGL teapot build. Mozilla patches with LinuxGL widget backend are also available at http://hg.mozilla.org/users/romaxa_gmail.com/embedipc_queue/file/linuxglpure. If you have the N9 smartphone or Beagleboard, it looks like you can also try this. Check files in http://romaxa.info/b2g/. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and […]

July 4, 2012July 5, 2012 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Amahi 6.1 for Ubuntu 12.04 Released

Amahi has just announced the release of Amahi 6.1, Ubuntu Edition, an Home Digital Assistant (HDA). Amahi used to only work for Fedora and this is their very first stable release for Ubuntu 12.04. The key features of Amahi 6.1, Ubuntu Edition include: Greyhole 0.9 (storage pooling technology) Reliability fixes and updates New look Support for 32 / 64-bit Desktop and Server versions of Ubuntu Improved cloud storage with Amahi Sync Preliminary support ARM platforms such as PandaBoard and BeagleBoard One-Click App installs via Amahi’s application store If you want to get started with Amahi, you’ll have to register (and get an install code), and follow a few command line instructions. The instructions are the same to install on ARM platforms (assuming you already have Ubuntu 12.04 running), but Amahi developers recommend to install it to an hard drive instead of an SD card for performance reasons. They are also […]

June 26, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

List of 39 Low Cost Linux Friendly Boards and Products

Dmitry (omgfire), one of my awesome readers, compiled a great tabular list of Linux friendly boards and products that sells for less than $300 US (usually less than $200). This list includes technical details such as the processor, GPU, memory, NAND flash, connectivity, ports, supported Linux distributions… as well as availability and pricing information. There are currently 39 Linux devices in total. The vast majority are ARM based boards, but he also included 2 x86 products by VIA, but those are relatively pricey ($265 and up). Here’s a summary list with SoCs used, links to blog posts and product pages (if available), as well as price information. Raspberry Pi Model B – Broadcom BCM2835 (ARM11) – Blog post (That’s my first post about the R-Pi last year, and the board is much different now) – Product page – Price: $35 + shipping Rikomagic MK802 – Allwiner A10 (Cortex A8) – […]

May 14, 2012July 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Schematics Capture and PCB Layout in Linux with Kicad

Most schematics capture and PCB layout software run on Windows and are closed source. But if your favorite OS is Linux, there are a few open source software including Kicad and gEDA. There is also Cadsoft Eagle which can be installed in Linux with a free license for hobbyists and educational purposes, but is not open source. Today, I’ll focus on Kicad. I don’t really capture schematics, let alone layout PCBs, but I sometimes need to use this type of software to locate pins/components on the schematics and PCB and check some parts of the schematics that can affect software. So I will mainly give an overview of Kicad and write my experience trying to import another project (Beagleboard XM) to Kicad. If you want to learn how to get started with your own project with Kicad, you might want to have a look at Teho Labs Kicad Tutorial. In […]

April 24, 2012April 24, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Syntro 0.5.0 Cross-platform C++ Framework for Distributed Sensor Networks

Pansenti has announced the first release of Syntro (version 0.5.0), a cross-platform framework for creating distributed sensor networks. Syntro is an open source C++ library and a set of applications based on Qt 4.7. The source code is released under the GPL license. Syntro has been developed on the following platforms: Linux Fedora 16 Ubuntu >= 10.10 Mac OS 10.7 Windows 7 Syntro can run on x86 targets as well as ARM based Pandabord, Beagleboard and Beaglebone development boards (Ubuntu only). Syntro is based on the following “SyntroCore” applications: SyntroExec – Start up and management of Syntro apps. SyntroControl – Message switching and multicast distribution. SyntroStore – Multicast stream capture. SyntroCFS – Cloud file storage. SyntroReplay – Multicast stream generation. SyntroLog – Network-wide logging. Some demo applications using one or more webcams and the OpenCV library are also available: SyntroCamera – Capture a stream from a video device (such as […]

April 16, 2012April 16, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Releases Android 4.0.3 DevKit for Beagleboard-XM and Beaglebone

After collaborating with arowboat, android-porting and Linaro communities, Texas Instruments has released Android 4.0.3 development kits for Sitara microprocessors which support Beagleboard-XM (Sitara DM3730) and Beaglebone (Sitara AM335x) low cost development boards, as well as other Sitara-based evaluation modules and development boards. Android 4.0.3 Devkit for Beaglebone If you have a Beaglebone (and an LCD or DVI-D cape), you can use TI Android ICS 4.0.3 DevKit v3.0.1, a release providing an Android ICS 4.0.3 distribution for TI’s Sitara AM335x ARM Cortex A8 Processors. This DevKit provides Android sources with pre-integrated SGX (3D graphics accelerator) drivers, TI hardware abstraction for Audio, WLAN & Bluetooth for TI WL1271 chipset, USB mass storage, etc, as well as development and debugging tools such as a toolchain, TI CCSv5, ADT plugins and more, which are provided to build custom Android solutions for the embedded market more easily. The pre-built images includes Android default apps, multimedia […]