b2g News - CNX Software - Embedded Systems News

February 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Geeksphone Revolution Multi OS Smartphone Supports Android, Firefox OS, and Soon More…

Geeksphone, the company behind the earlier Firefox OS developer’s phones, and the privacy-enhanced Blackphone, has now officially launched the Geeksphone Revolution powered by a dual core Intel Atom Z2560 processor and supporting Android, Firefox OS, or more exactly Boot2Gecko (B2G), and potentially other OS supported by the community such as Sailfish OS. Geeksphone Revolution specifications: SoC – Dual core Intel Atom processor Z2560 up to 1.6GHz System Memory – 1GB LPDDR2 Storage – 4GB EMMC + MicroSD support, Up to 32GB Display – 4.7″ IPS LCD Multi-touch, qHD resolution. Cellular network – HSPA/WCDMA: 2100/1900/900/850 MHz, GSM/GPRS/EDGE: 850/900/1800/1900 MHz, HSDPA up to 21Mbps, HSUPA up to 5.76Mbps, GPRS Class 12 / EDGE Class 12 Connectivity – WiFi 802.11 b/g/n, Bluetooth Class 3.0, GPS, AGPS Camera – 8 MP rear camera with LED Flash, 1.3 MP front camera System I/O – 3.5mm audio jack, micro USB Sensors – G‐Sensor + E‐Compass + […]

July 26, 2013July 26, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

149 Euros Geeksphone Peak+ Phone Running Firefox OS (B2G) is Available for Pre-order

The first Firefox OS phone, ZTE Open, has been selling in Spain since the beginning of the month, and Alcatel One Touch Fire has been available a few days later in Germany. Both of those phones have low hardware specs with a single core processor, and 256 MB RAM. There’s now a more powerful alternative, Geeksphone Peak+, based on Geeksphone Peak Developer Preview phone, featuring Qualcomm Snapdragon S4 MSM8255 dual-core processor with 1GB RAM. Here are the specs of the phone: SoC – Qualcomm Snapdragon S4 (MSM8225) dual-core processor @ 1.2 GHz with Adreno GPU System Memory – 1 GB RAM Storage – 4 GB Flash + micro SD card slot Display – 4.3 inch, 960 x 540 pixel IPS display Camera – 8MP rear camera and 2MP front camera Connectivity – WiFi, Bluetooth, FM radio, GPS Networks – GSM 850/900/1800/1900 (2G EDGE), UMTS 850/1900/2100 (3G HSPA). Sensors – Light […]

August 16, 2012August 16, 2012 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Firefox OS Running on the Raspberry Pi

Oleg Romashin, a Nokia engineer, has been working on porting Firefox OS (previously known as Boot 2 Gecko) to the Raspberry Pi, and has uploaded a YouTube video showing a Firefox OS running on the device, including a WebGL teapot demo running at 60 fps. This Firefox OS build is based on Debian Squeezy, with plain EGL rendering, no Widget Toolkit backends and no X11. Some parts do not look very smooth yet, but this demo looks promising. If you want to try it yourself, you can download the WebGL teapot build. Mozilla patches with LinuxGL widget backend are also available at http://hg.mozilla.org/users/romaxa_gmail.com/embedipc_queue/file/linuxglpure. If you have the N9 smartphone or Beagleboard, it looks like you can also try this. Check files in http://romaxa.info/b2g/. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and […]

July 2, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Mozilla Renames Boot 2 Gecko to Firefox OS and Partners with ZTE & TCL

Mozilla announced it would rename its Boot 2 Gecko (B2G) HTML5 mobile operating system to Firefox OS, and that ZTE and TCL (under the Alcatel brand) would manufacture the first devices running Firefox OS using Qualcomm Snapdragon Processors. The first devices should be available early 2013, at first in Brazil through Vivo, Telefónica’s commercial brand. The company also said that telecom operators such as Deutsche Telekom, Etisalat, Smart, Sprint, Telecom Italia, Telefónica and Telenor are planning to sell Firefox OS based smartphones. The platform is said to be optimized for entry-level smartphones thanks to the removal of unnecessary middleware layers among other things. This should allow mobile operators to provide low-cost handsets with “richer experiences” for the developing markets. Firefox OS will be fully open source and the reference implementation of the required Web APIs is being submitted to W3C for standardization. Internally, the project still appears to be referred to […]

March 1, 2012March 1, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

B2G (Boot to Gecko) Video Demo at MWC 2012

B2G (Boot to Gecko) is an open source HTML5-based operating system targeting mobile devices by the Mozilla Foundation. This OS runs on top of Linux and uses Firefox as the web browser. You can get further details on my previous post “Mozilla Boot to Gecko (B2G) OS Is Coming to Your Smartphone“. As previously announced, Mozilla showcased B2G on a Samsung Galaxy S2 at Mobile World Congress 2012. Every apps are written in HTML5 including the camera application that uses HTML5 Media Capture and Canvas for real-time effects. Engadget was there and shot the video demo below. If you have a Samsung Galaxy S2, you can build and try it on your device. This is experimental, so there is always the risk of bricking your phone. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to […]

February 16, 2012February 16, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mozilla Boot to Gecko (B2G) OS Is Coming to Your Smartphone

Mozilla, non-profit organization, well known for its Firefox web browser and Thunderbird mail client has recently moved to the mobile space with Firefox for Android browser for smartphones and tablets. However they intend to go even further by releasing a mobile operating systems named Boot to Gecko (B2G) competing directly with Android, iOS and Windows Phone. Mozilla mobile operating system will use web standards (like Tizen does) and the goal is to displace proprietary, single-vendor stacks for application development (e.g. Android, iOS, WP7). The OS itself will relies on the Linux kernel and some open source libraries and the B2G applications will be written using HTML5/Javascript/CSS3 standard. Basically, it will boot Linux and use the Gecko engine (like in Firefox) to render application in a way similar to what Google does with Chrome OS. The HTML5-based user interface of B2G is called Gaia and is a collection of web apps. […]