automotive News - Page 23 of 33 - CNX Software

July 31, 2017July 31, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

VIA Mobile360 ADAS System Includes a 4G Connected Rugged Computer, a 7″ Display and 4 to 6 Cameras

VIA Mobile360 ADAS (Advanced Driver Assistance System) System is a road safety-enhancing solution that supports Lane Departure Warning, Forward Collision Warning, Blind Spot Detection, Pedestrian Detection, Vehicle Detection and Classification for special vehicles, motorcycles, and bicycles, Speed Limit Detection, and Rear-end Collision Avoidance. The system is comprised of “Mobile360 System” rugged computer, 4 to 6 cameras, and an optional 7″ display. Mobile360 System computer specifications: SoC – Unnamed Octa-core big.LITTLE processor with four ARM Cortex-A17 cores @ 1.8GHz, and four Cortex A7 cores @ 1.4GHz (Likely Zhaxin ZX-5880 SoC also including Elite 2000 GPU supporting OpenGL ES 3.1, OpenVG 1.1 and OpenCL EP 1.1) System Memory – 2GB Mobile LPDDR3 1600MHz RAM (Package-on-Package with SoC) Storage – 1x 512GB Transcend 2.5″ MLC SSD (-40°C-90°C); 16GB eMMC Flash memory; 1x Micro SD card slot; 1x full size SD card slot Connectivity – Gigabit Ethernet, 1x 4G LTE module, 1x Wi-Fi 802.11b/g/n […]

June 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek tBOX100-838-FL Fanless Transportation Computer Features BNC Video & Audio Inputs for DVR Function

Axiomtel tBOX100-838-FL is a fanless Bay Trail rugged embedded computer powered by an Intel Bay Trail-I E3845 processor with 5 BNC input ports for video and audio, and targeting vehicle, railway and marine markets. Axiomtek tBOX100-838-FL rugged mini PC’s specifications: SoC – Intel Atom E3845 quad core Bay Trail-I processor @ up to 1.91 GHz with Intel HD graphics System Memory – 4 GB DDR3L-1333 Storage – 1x 2.5” SATA slot up to 9.5mm, 1x mSATA connector, flash for AMI BIOS Video Output – 1x VGA port Video / Audio Input – 4x video in BNC connector, 1x audio in BNC connector Connectivity – 2x M12 A-coded GbE LAN or 2x RJ-45 GbE LAN (via Intel i210) Serial – 1x RS-232/422/485 (DB9) USB – 2x USB 2.0 port Expansion – 1x Full-size PCIe Mini Card with mSATA; 1x SIM card slot Misc – 1x remote switch; 1x reset button; watchdog […]

June 15, 2017June 15, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Marvell 88W8987xA Wireless SoC Supports 802.11ac & 802.11p WiFi, Bluetooth 5 for V2X & IVI Automotive Applications

Marvell has introduced the new 88W8987xA wireless chip with 802.11ac, 802.11p and Bluetooth 5 Connectivity for V2X (Vehicle-to-Everything) and IVI (In-Vehicle Infotainment) automotive applications such as Dedicated Short Range Communications (DSRC) systems, and secure wireless Gateway systems. Key features of Marvell 88W8987xA family: Connectivity WiFI – IEEE 802.11ac (wave2) up to 433 Mbps / IEEE 802.11p WAVE (Wireless Access in Vehicular Environments) / 1609.x Bluetooth 5 including Bluetooth Low Energy Angle of Arrival and Departure (AoA/AoD) 2x antenna configuration for Wi-Fi/Bluetooth coexistence Host Interfaces – SDIO 3.0 interface (4-bit SDIO and 1-bit SDIO) @ up to 208 MHz; high-Speed UART interface (for Bluetooth only) Audio Interfaces – Digital audio interfaces (PCM) Temperature Range – -40°C to +105°C (AEC-Q100 Grade 2 Qualification) Package – pin 8×8 mm QFN with wettable flanks The family now includes three pin-to-pin compatible SoCs: 88W8987A with 802.11ac + Qualified Bluetooth 5 Functionality 88W8987PA with 802.11p + […]

April 25, 2017June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

ARM Introduces Mali-C71 ISP (Image Signal Processor) for Automotive Applications

A camera in an embedded system is normally connected to an ISP (image signal processing) block inside an SoC to handle the data coming from the sensor, and with recent cars now requiring more and more cameras for car DVRs, car parking systems, and self-driving vehicles, ARM has now unveiled Mali-C71 ISP specifically designed for automotive applications with support for 4 real-time cameras and 16 camera streams with a single pipeline. ARM explains that you can’t simply use smartphone cameras in automobile, as automotive requirements in terms of clarity and reliability are much more stringent. For example, Mali-C71 supports UWDR (Ultra-wide dynamic range) up to 24 stops, against 15 stops for the best DSLR cameras, which removes noise and process multiple exposures from the camera, and allows the processor/computer vision engine to detect objects such as a pedestrian, while others systems may not detect it. The image is also much […]

April 4, 2017April 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Solar Powered CAREUD U800WF Monitoring System Checks Your Car’s Tires Pressure

Every few months, we inflate (or deflate) our car tires at the gas station to match the pressures for front and rear tires given by the manufacturer. But if you want to make sure the pressures are always at their optimal levels, or close to it CAREUD U800WF pressure monitoring system might be a useful little gadget. The monitor that you can place on your dashboard comes with the following specifications: Display showing pressure with +/- 1.5 PSI accuracy and temperature with +/- 3 °C accuracy for all four tires; data updated every 3 seconds. Connectivity – 433.92 MHz RF Power Supply Solar Panel 5V via micro USB port 900 mAh Li-ion Battery Temperature Range – Storage: -30 to 85 °C; operating: -20 to 80 °C IP Rating – IP5K4K (The “K” in the ingress protection rating means it complies with ISO 20653:2013 Road Vehicles-Degrees of protection) Dimensions – 76 […]

March 27, 2017July 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux based iWave Systems OBD-II Dongle Comes with 4G LTE and GPS

OBD-II dongles that you connect to your car’s OBD-II port have been around for several years, but they were initially simple devices with USB or Bluetooth connectivity that you control with your smartphone or computer. More recently we’ve seen more complex OBD-II head-up-diplays, and boards such as Macchina M2 open-source hardware OBD-II board that takes various XBee modules for 4G, Ethernet, WiFi, Bluetooth, GPS, and so on. iWave Systems, a company better known for their system-on-modules, has now unveiled their own OBD-II dongle with NXP i.MX 6UL processor running Linux, and integrating 4G LTE and GPS by default. iWave Systems OBD-II dongle specifications: Processor – NXP i.MX 6UL ARM Cortex-A7 processor @ 528/696MHz Memory – 256 MB DDR3 (Optionally upgradeable to higher capacity) Storage – 256 MB NAND Flash (optionally upgradeable to higher capacity). Connectivity – Built-in 4G Modem with antenna, optional WiFi & Bluetooth 4.0 LE module Positioning – […]

March 17, 2017March 17, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Dell Edge Gateway 3000 Series Are Powered by Intel Bay Trail-I SoCs for Automation, Transportation, and Digital Signage

Dell has recently introduced Edge Gateway 3000 series with three models powered by Intel Bay Trail-I processor, running Ubuntu Core 16 or Windows 10 IoT, with each model targeting respectively general-purpose automation, transportation & logistics, and digital signage and retail. The specifications for the three models can be found in the table below. Dell Edge Gateway 3001 Model for General-Purpose Automation Dell Edge Gateway 3002 Model for Transportation & Logistics Dell Edge Gateway 3003 Model for Media & Retail Kiosks SoC Intel Atom E3805 dual core processor @ 1.33 GHz (3W TDP) Intel Atom E3815 single core processor @ 1.46 GHz with GPU @ 400 MHz (5W TDP) System Memory 2 GB DDR3L-1066 Storage 8 or 32 GB eMMC flash Industrial-grade Micro-SD card: 8GB / 16GB / 32 GB / 64 GB Connectivity 1 x 10/100 Fast Ethernet (RJ-45) with PoE (15.4W) WiFi 802.11 b/g/n Bluetooth 4.0 LE Optional ZigBee […]

March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NXP Introduces Kinetis K27/K28 MCU, QorIQ Layerscape LS1028A Industrial SoC, and i.MX 8X Cortex A35 SoC Family

NXP pushed out several press releases with the start of Embedded World 2017 in Germany, including three new micro-controllers/processors addressing different market segments: Kinetis K27/K28 MCU Cortex M4 MCU family, QorIQ Layerscape LS1028A industrial applications processor, and i.MX 8X SoC family for display and audio applications, 3D graphic display clusters, telematics and V2X (Vehicle to everything). NXP Kinetis K27/K28 MCU NXP Kinetis K27/K28 MCU family is based on an ARM Cortex-M4 core clocked at up to 150 MHz with FPU,and includes up to 1MB embedded SRAM, 2MB flash, and especially target portable display applications. Kinetis K27/K28 MCUs share the following main features: 2x I2S interfaces, 2x USB Controllers (High-Speed with integrated High-Speed PHY and Full-Speed) and mainstream analog peripherals 32-bit SDRAM memory controller and QuadSPI interface supporting eXecution-In-Place (XiP) True Random Number Generator, Cyclic Redundancy Check, Memory Mapped Cryptographic Acceleration Unit K28 supports 3 input supply voltage rails (1.2V, 1.8V […]