automation News - Page 42 of 63 - CNX Software

June 19, 2018June 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$10 H801 WiFi RGB LED Controller Supports Sonoff-Tasmota Open Source Firmware

This week-end, I played with ANAVI Light Controller, an open source hardware solution based on ESP8266 used control 12V RGB LED strips. The board has the advantage of being open source with KiCad schematics, Arduino firmware, and HTML5 server program available, so easy to get started and modify the features as you see fit, and it also supports external I2C sensors via three headers. That’s a low volume project made in Eastern Europe and as a result the board costs $25, so I was shortly made aware there were cheaper solution, and if you are ready to mess around a little bit, H801 WiFi controller appears to be one of the most interesting solution as it sells for under $10 shipped on Aliexpress or eBay, and is officially supported by Sonoff-Tasmota open source firmware. H801 specifications: Connectivity – 802.11 b/g/n WiFi (2.4GHz) with about 10 meter range Output – 5x […]

June 15, 2018July 3, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

ModBerry M500 Industrial Computer Upgraded to Raspberry Pi 3 B+ with PoE Support

TECHBASE has been making modular industrial computers based on hobbyist boards for several years with products like ModBerry M300 IoT Gateway. ModBerry M500 is another of their model, powered by a Raspberry Pi 3 board and launched in 2016. The company has now upgraded the industrial gateway to Raspberry Pi 3 B+ board, and added PoE support in the process. ModBerry M500 specifications: SoC – Broadcom BCM2837B0 quad-core Arm Cortex-A53 processor @ 1.4 GHz with VideoCore IV GPU System Memory – 1GB DDR3 Storage – 8GB micro SD card Video & Audio Output – HDMI 1.4 and 3.5mm jack for CVBS (composite + stereo audio) Connectivity Gigabit Ethernet (max 300 Mbps) Dual band 802.11 b/g/n WiFi and Bluetooth 4.2 LE Optional Zigbee, LTE/3G, GPS, WiFi, and Bluetooth cards USB – 2x USB 2.0 host ports Expansion I/Os 2x RS-232/RS-485 4x digital inputs, 4x digital outputs up to 30V DC 1-wire […]

May 24, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

ESP8266 based ANAVI Light Controller can be Programmed with Home Assistant or the Arduino IDE (Crowdfunding)

ANAVI Technology previously launched a Light pHAT allowing for RGB Light strip connection to Raspberry Pi boards, and during my review of ANAVI Light pHAT with Raspberry Pi 2, it did the job, but if that’s all you want to do, the Raspberry Pi board is clearly oversized & overpowered for the job. So Leon ANAVI got back to the drawing board and designed a similar open source hardware board – called ANAVI Light Controller – with an built-in ESP8266 module that removes the need for a fully fledged Linux board. ANAVI Light Controller specifications: Wireless Module – ESP8266MOD module based on ESP8266 Tensilica L106 32-bit processor Connectivity – WiFi 802.11 b/g/n Expansion Terminal block for 12 V RGB LED strip 3x I2C headers for sensors Debugging – UART header Misc – Button Power Supply – 12 V via power barrel jack Dimensions – 75 mm x 40 mm Certification […]

May 21, 2018May 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Sonoff S26 WiFi Smart Plug Works in All/Most Countries, Sells for under $10

One recurring issue with smart plugs / sockets is that they are often designed with a specific prong type, so if you want to use them in our country you may have to add an adapter, which may not be ideal, since the socket may fall off or have bad contact. Sonoff S26 WiFi smart plug solves that issue as ITEAD Studio made it available in six different versions for China, Australia, United Kingdom, Europe type F, Europe type E, and the United States. Sonoff S26 specifications: Standard – US/ UK/ CN/AU/ EU(type F/E) Power supply – 90V~250V AC @ 50/60Hz Max. Current – 10A Max power – 2200W Connectivity – 802.11.b/g/n 2.4G WiFi with WEP/TKIP/AES encyprtion, WPA-PSK/WPA2-PSK security Dimensions – 104 x 55 x 73 mm (Fire Retardant ABS enclosure) Weight – 130 grams Temperature Range – 0ºC-40ºC Humidity- 5%-90%RH, Non-condensing Certification – CE Just like other Sonoff devices, […]

May 10, 2018May 10, 2018 by Karl Johnson - 1 Comment

Two Interesting Projects on Github: Zigbee to MQTT bridge & “Deep Painterly Harmonization”

Hey Karl here. I thought I would try and showcase some GitHub projects that I run into that seem interesting or fun. This week I will start out with 2 projects. Zigbee to MQTT bridge The first one today is a Zigbee to MQTT bridge. Previously we did a couple articles with 433MHz bridges for home automation, a diy RF bridge and one by Sonoff. This bridge is similar but with Zigbee. Unfortunately 433MHz typically have one way communications, and when a message is sent there is no response and the system has to assume the message is received. Zigbee is a 2 way protocol and an acknowledgement can be sent back. The code is moving fast right now and blowing up my GitHub notices. It is a little bit of a mystery on how this works right now with the parts list, but seems to be working for some […]

May 3, 2018May 3, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

XH-M452 Board Helps Controlling a Cabinet or Room’s Temperature & Humidity

XH-M452 is a board designed to control the temperature and humidity in a room or cabinet. It comes with two relays to control appliances like fans, air conditioners, (de-)humidifiers, or heaters, and ships with a temperature and humidity probe attached to a one meter cable. XH-M452 board specifications: “ST Controller” Relays – 2x SONGLE 10A/250VAC 125VAC relays for temperature control (left) and humidity control (right). Display – 2x LED display for temperature & humidity Sensor 1 meter probe for temperature & humidity Temperature range – -20 to 60°C +/- 0.1°C Humidity range – 0% to 100% RH +/- 0.1% RH Misc – +/- buttons to adjust temperature and humidity; 2x relay status LEDs. Power Supply – 12V via terminal Dimensions – 65 x 55 x 28mm You’ll need to provide a 12V power source for the board, connect an appliance to control the temperature on the left terminals, and an […]

April 19, 2018April 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Alfawise JD-T8610-Q2 is Both a WiFi Light Bulb and 360° IP Camera

IP cameras and WiFi light bulbs are pretty common nowadays, but Alfawise JD-T8610-W2 combines both in a single device. The 3W white light bulb can be controlled with your Android/iOS smartphone to adjust the light, and a 360° camera with IR night vision is also built into the light bulb. Specifications: Camera + audio 1.3MP fisheye lens camera with 360° field of view (FOV) Built-in microphone and speaker Video / Audio format – H.264/AVI 960×960 @ 20 fps + audio (no format specified) Functions Interphone Motion detection up to 4 meters Night vision via 3 IR LEDs up to 8 meters Real-time video capture and recording Remote control Screenshot Storage – micro SD card slot up to 64GB Connectivity 802.11 b/g/n WiFi with WEP, WPA, WPA2 encryption, 10 meters range Protocols: DHCP, TCP/IP, RTSP Light – 3x 1W white light Power Supply – 110-240V via E27 socket (5V DC internally) […]

April 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

IBASE AGS100/AGS102 Smart IoT Gateway Targets Industrial Control and Factory Automation

IBASE has introduced AGS100 and AGS102 intelligent IoT gateways powered by an Intel Apollo Lake processor, and specifically geared towards industrial control and factory automation applications. AGS100 can be powered by Intel Atom processor E3950/ E3930 with extended operating temperature (-40°C to 70°C), Intel Pentium N4200, and Celeron N3350 processors (-20°C to 60°C), while AGS102 adds support for two RS232 ports and more GPIOs. Specifications: SoC – Intel Atom E3950/E3930 or Pentium N4200/ Celeron N3350 processor System Memory – 1x 4GB DDR3L-1866 SO-DIMM, up to 8GB Storage – 1x mSATA socket (Mini-PCI-E), 1x 2242 M.2 B-Key socket for mSATA SSD Rear Panel External I/O 1x DVI-I + 1x DisplayPort connector 4x USB 3.0 ports 2x RJ45 Gigabit Ethernet port 3x LED indicators (HDD, WLAN, WWAN) 1x power button with green LED 1x 3-pins DC-in terminal block type for 9-36V DC input 1x Antenna hole for WLAN module AGS102 only – […]