automation News - Page 30 of 60 - CNX Software

August 4, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

ESPurna ESP8266 Automation Firmware Gets Support for BME680 Sensor’s Precise Indoor Air Quality Measurements

Bosch BME680 is a 4-in-1 air quality sensor measuring relative humidity, barometric pressure, ambient temperature, and gas (VOC) levels. It’s found in boards such as STM32 based Metriful Sense or Nordic Thingy:91, and Bosch Sensortec published an Arduino library based on “Bosch Sensortec Environmental Cluster (BSEC) Software” to provide precise calculations temperature, humidity, pressure, and indoor air quality (IAQ). BSEC proprietary algorithms can provide indoor air quality data as good as more expensive CO2 sensors according to a recent presentation by the company. Max Prokhorov, lead ESPurna maintainer, and Rui Marinho noticed none of the popular open-source ESP8266 automation firmware including ESPurna, Tasmota, and Esphome supported BME680 sensor just yet. So they decided to work together to add BME680 sensor support via BSEC library to ESPurna firmware, and now it’s very easy to use as you just need to define BME680_SUPPORT=1 before compiling the firmware. You’ll find the now-merged pull […]

July 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

EMIT ESP32 IoT Development Board Comes with Temperature & Humidity Sensor, 5A SPST Relay (Crowdfunding)

ControlBits EMIT (Environmental Monitoring for the Internet of Things) is a baseboard compatible with DOIT ESP32 DevKit V1 development board and equipped with a temperature and humidity sensor, a relay, a 12-pinGPIO connector, and a MicroSD card. EMIT ESP32 IoT development board specifications: Socket for DOIT ESP32 DevKit v1 board with WiFi and Bluetooth LE connectivity Storage – MicroSD card socket Sensor – AM2302 temperature & humidity sensor with -40° to +80° C and 0 to 99.9 %RH ranges. Relay – 5A SPST relay output with status LED Expansion – 12-pin GPIO header Misc – 2x programmable status LEDs (red & green) Power Supply – 5V via USB on ESP32 board, or external 7-12 V supply via terminal block Dimensions – 81 x 81 mm (PCB only) The board comes with mounting holes so it can be wall-mounted, and an optional enclosure is also available. Some applications for the board […]

July 28, 2020July 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

M.2 and Half-size mPCIe Cards Support Real-Time Ethernet and FieldBus Networks

Hilscher cifX M.2 and half-size mini PCIe cards powered by the company’s NETX 90 network-on-chip multi-protocol Cortex-M4 SoC bring real-time Ethernet and FieldBus to compatible systems. The tiny cards are designed for PC-based devices such as IPC’s, HMI’s and robots, and support various firmware for PROFINET IO-Device, EtherNet/IP Adapter, EtherCAT Slave, or OpenModbus/TCP. The company claims its cifX M.2 (A+E key) and half-size mini PCIe cards are the smallest multiprotocol PC cards on the automation market with a size of 22×30 mm and 30×26.8 mm respectively. The cards also support extended temperature from -20°C to 70°C and offer one hardware platform for all real-time Ethernet slave protocols. Besides PROFINET IO-Device, EtherNet/IP Adapter, EtherCAT Slave, and OpenModbus/TCP, Hilscher will provide support for CC-Link IE Field Basic and Ethernet POWERLINK Slave in new firmware available in Q4 2020, and OPC UA and MQTT functionalities are planned for future releases. The cards are […]

July 27, 2020February 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Sonoff Zigbee Bridge Now Supports Tasmota Firmware, Home Assistant, Zigbee2Tasmota

Sonoff Zigbee Bridge & Tasomota Home Assistant

Sonoff ZBBridge (aka Sonoff Zigbee Bridge) WiFi to Zigbee gateway was launched a few months ago for $16.90 plus shipping, and it’s now also listed on Banggood for $17.99 shipped. It allows users to control Zigbee devices connected to the gateway using the eWelink mobile app used with other Sonoff devices. But many people like to run Tasmota firmware on their Sonoff devices since it’s open-source and provided more flexibility such as integration with Home Assitant or Domoticz. There was already support for Zigbee in Tasmota at the time but only for Texas Instruments SimpleLink CC253x Zigbee MCU’s, and Sonoff ZBBridge is made of an ESP8266 WiSoC and a Silicon Labs EFR32MG21 Gecko Series 2 Cortex-M33 Zigbee microcontroller. So I just suspected that eventually, Sonoff Zigbee Bridge could support Tasmota open-source firmware but that would take some time… It took about four months. Not too bad. It started in the […]

June 29, 2020June 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Aegis Secure WiFi Smart Deadbolt Works with Android/iOS Phones (Crowdfunding)

We previously wrote about smart lock systems that allow you to open your door with the help of your smartphone. Products covered including Xiaomi Sherlock M1 that only works with specific doors/locks, and K1 smart lock box that stores your keys in a rugged box meaning it works with all door mechanisms, but it does not seem particularly secure to me. BOSMA Aegis Bluetooth & WiFi smart deadbolt looks to potentially a more secure solution as it should work with any door, and complements your main lock which you may want to use when you are not at home for longer periods of time. Aegis smart deadbolt specifications: Connectivity – Built-in Bluetooth; WiFi via a WiFi connector shipped with Aegis Voice Assitant Integration – Google Home and Amazon Alexa Optional BOSMA Sentry smart doorbell with Storage – Up to 128GB via MicroSD card slot; cloud storage Video – 1080p video […]

June 7, 2020June 6, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

STM32 based Indoor Air Quality Sensor Connects to Raspberry Pi or Arduino (Crowdfunding)

Indoor Air Quality Sensor Raspberry Pi Arduino

Even before the COVID-19 lockdown, people spent most of their time indoors (around 90% according to some studies), so it’s important to monitor air quality and other metrics like light and sound levels in our homes, workplaces, schools, cars, etc… Metriful Sense indoor environment monitor does just that by reporting multiple metrics such as temperature, humidity, particle concentration, etc… over I2C to microcontroller or processor boards such as Arduino or Raspberry Pi. Sense hardware specifications: MCU – STMicro STM32G071KB Arm Cortex-M0+ microcontroller @ 64 MHz with 128 KB Flash, 36 KB SRAM Sensors Bosch Sensortec BME680 4-in-1 air quality sensor with relative humidity, barometric pressure, ambient temperature, and gas (VOC). Vishay VEML6030 ambient light sensor Knowles SPH0645LM4H-B MEMS microphone Optional – Shinyei PPD42 particle sensor unit I/Os – 10-pin unpopulated header with air particles sensor input, light and sound interrupt outputs, I2C, VPU pin for 3.3V/5V selection, GND, VDD, VIN […]

June 2, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Sonoff SNZB Zigbee Sensors and Switches Launched for under $10

ITEAD had started to expand from WiFi and RF433 capable Sonoff home automation devices into Zigbee smart home solutions in recent months with the launch of products such as Sonoff ZBBridge WiFi to Zigbee gateway and a TI CC2531 based Zigbee USB dongle preloaded with firmware compatible with Zigbee2MQTT. But so far, they had only one Zigbee node, namely Sonoff BASICZBR3 Zigbee power switch. More options are now available with the launch of four Sonoff SNZB Zigbee sensors and switches working with the company’s ZBBridge. Key features of the four new Zigbee sensors & switches: SNZB-01 Zigbee wireless switch Touch button with single, double press and long press support Battery – 3V (CR2450) Dimension – 43x43x16mm SNZB-02 Zigbee temperature & humidity sensor Unnamed temperature and humidity sensor Battery – 3V (CR2450) Dimension – 43x43x14mm SNZB-03 Zigbee motion sensor Built-in PIR sensor with 6m range and 110°viewing angle. Battery – 3V […]

May 22, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Advantech Edge AI Computer and PoE NVR Feature NVIDIA Jetson Xavier NX SoM

Advantech NVIDIA-Jetson-Xavier NX Edge AI Computer

Following the launch of NVIDIA Jetson Xavier NX SoM last year, we noted several third-party carrier boards and embedded PCs had been announced, and we expected more to come soon. Advantech has now unveiled two systems based on NVIDIA latest module with respectively MIC-710AIX edge AI computer and MIC-710IVX NVR system equipped with eight PoE ports. MIC-710AIX edge AI computer Specifications: SoM – NVIDIA Jetson Xavier NX with 6-core NVIDIA Carmel ARM v8.2 64-bit CPU, 6MB L2 + 4MB L3 caches 384-core NVIDIA Volta GPU with 48 Tensor Cores 2x NVDLA deep learning accelerators System Memory – 8GB 128-bit LPDDR4x Storage – 16 GB eMMC 5.1 flash Storage – M.2 2280 Key-M socket for SSD; SD card socket Video Output – HDMI up to 3840×2160 @ 60 Hz Networking – 2x Gigabit Ethernet (RJ45) via Intel i210IT controller USB – 1x USB 3.0 host port, 1x USB 2.0 host port, […]