automation

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on LeapFive NB2 quad-core RISC-V processor comes with GPU, NPU, and DSP

LeapFive NB2 quad-core RISC-V processor comes with GPU, NPU, and DSP

LeapFive NB2 quad-core RISC-V processor

After SiFive and StarFive, here comes LeapFive RISC-V silicon vendor offering the NB2 quad-core 64-bit RISC-V application processor with GPU, NPU, and vision and audio DSPs capable of running Linux. LeapFive NB2 processor is equipped with MIPI DSI and LVDS display interface, dual GbE, USB 3.2/2.0 interfaces, and other peripheral interfaces that make it well-suited to a wide range of applications including Smart Home applications, robotics, industrial gateways, drones, building automation, smart cities, digital signage, medical equipment and more. LeapFive NB2 specifications: CPU – Quad-core SiFive U74 64-bit RISC-V processor @ 1.8 GHz delivering 2.5 DMIPS/MHz Cache – 32KB I-cache, 32KB D-cache, 2MB level 2 cache GPU – “High-performance graphics processor” @ 850 MHz DSP – Dedicated vision DSP, audio DSP NPU – Independent AI engine delivering up to 4 TOPS @ 1.4 GHz VPU – 4Kp60 H.264/H.265 Video encoding and decoding, JPEG image codec System Memory – Up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on SONOFF NSPanel Pro Android control panel doubles as WiFi & Zigbee Smart Home gateway

SONOFF NSPanel Pro Android control panel doubles as WiFi & Zigbee Smart Home gateway

SONOFF NSPanel Pro

ITEAD has introduced the SONOFF NSPanel Pro Smart Home control panel running Android 8.1 on a Rockchip PX30 quad-core Cortex-A35 processor and acting as a Smart Home gateway thanks to an 802.15.4 radio for Zigbee 3.0, and 2.4 GHz 802.11b WiFi for connectivity. The NSPanel Pro follows the ESP32-powered SONOFF NSPanel introduced just last year but offers much more flexibility with Android, 2GB RAM, 8GB eMMC flash, and also offers a slightly larger 3.95-inch capacitive touchscreen display with 480×480 resolution. SONOFF NSPanel Pro specifications: SoC – Rockchip PX30 quad-core Cortex-A35 processor with Arm Mali-G31 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC 5.1 flash Display – 3.95-inch capacitive touchscreen color TFT display with 480×480 resolution Audio – 1W speaker, digital microphone for two-way communication (intercom) Connectivity 802.15.4 radio with Zigbee 3.0 support. Matter and BLE Mesh scheduled for 2023 2.4 GHz 802.11b WiFi Sensor – Light sensor for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Renesas RZ/N2L Arm Cortex-R52 MPU targets industrial Ethernet and TSN

Renesas RZ/N2L Arm Cortex-R52 MPU targets industrial Ethernet and TSN

Renesas RZ/N2L Arm Cortex R52 ethernet switch

Renesas RZ/N2L is an Arm Cortex-R52 microprocessor (MPU) family for industrial Ethernet communication equipped with an integrated TSN-compliant 3-port Gigabit Ethernet switch and an EtherCAT slave controller. The new processors also support other major industrial network communication protocols such as EtherCAT, PROFINET RT, EtherNet/IP, and OPC UA, as well as the new PROFINET IRT (Isochronous real-time) that allows deterministic communication with cycle times down to 31.25 µs and one µs of jitter. Renesas RZ/N2L key features and specifications: CPU – Arm Cortex-R52 @ up to 400MHz with 16KB I-cache with ECC, 16KB D-cache with ECC Memory Tightly coupled memory – 256KB with ECC Internal RAM – 1.5MB with ECC Octa/Quad SPI for HyperRAM, HyperFLASH, SRAM, SDRAM Networking Ethernet L2 switch: 3x external ports with Gigabit support TSN support (IEEE 802.1AS-2020, IEEE 802.1Qbv/802.3br, IEEE 802.1Qbu, etc.) Network redundancy support (DLR, PRP) EtherCAT slave controller Industrial Ethernet – EtherCAT, PROFINET RT/IRT, EtherNet/IP, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on Sonoff ZBDongle-E Zigbee 3.0 USB dongle features EFR32MG21 MCU with +20dBm radio

Sonoff ZBDongle-E Zigbee 3.0 USB dongle features EFR32MG21 MCU with +20dBm radio

Sonoff ZBDongle-E

ITEAD has just released a new “ZBDongle-E” Zigbee 3.0 USB adapter with Silicon Labs Mighty Gecko EFR32MG21 Arm Cortex-M33 microcontroller with a +20dBm radio for extended range. The new dongle is an alternative to the popular Texas Instruments CC2652P-based Sonoff Zigbee 3.0 USB Dongle Plus, also known as “ZBDongle-P”, with a more compact design, and many of the same features. Sonoff ZBDongle-E specifications: Wireless MCU – Silicon Labs EFR32MG21 Arm Cortex-M33 multiprotocol wireless MCU @ 80 MHz with 64KB RAM, 768KB flash, +20 dBm 802.15.4 radio for Zigbee 3.0 and Thread support, and as well as a Bluetooth 5.1 Low Energy radio Connectivity – Zigbee 3.0 with SMA antenna connector, +20 dBm output power Host interface – USB port with CH9102F USB to TTL chip Expansion – 7-pin IO header with programming pins Misc – Boot and reset buttons, Zigbee LED, Power LED Power Supply – 5V/100mA via USB port, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Acromag XMC-7A50-AP323 – An XMC module based on AMD Xilinx Artix-7 FPGA

Acromag XMC-7A50-AP323 – An XMC module based on AMD Xilinx Artix-7 FPGA

XMC Module Artix-7 FPGA

Acromag XMC-7A50-AP323 is an XMC (Switched Mezzanine Card) module based on a Xilinx Artix-7 FPGA with 48 TTL I/O channels plus a 16-bit ADC for 20 differential or 40 single-ended analog inputs. Designed for commercial off-the-shelf (COSTS) applications, Acromag XMC modules are RoHS compliant, and suitable for automation applications, scientific development labs, as well as aerospace and military applications. Acromag XMC-7A50-AP323 module specifications: FPGA – AMD Xilinx Artix-7 (XC7A050) FPGA with 52,160 logic cells, 65,200 Flip flops, 2,700 kb block RAM, 120 DSP slices Storage – 32Mbit QSPI flash memory FPGA Digital I/O 48x I/O channels controlled in groups of eight channels, 5V tolerant TTL, RS485, and LVDS interface options: Build Option A: 24x EIA-485/422 channels Build Option B: 24x TTL and 12x EIA-485/422 channels Build Option C: 24x LVDS channels Analog Input 20 differential or 40 single-ended inputs Flexible scan control 16-bit A/D resolution 8μs conversion time FIFO buffer […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Theengs open-source tools to decode BLE sensors work on ESP32, Raspberry Pi, Android phone, etc…

Theengs open-source tools to decode BLE sensors work on ESP32, Raspberry Pi, Android phone, etc…

Theengs

Theengs is a manufacturer agnostic open-source set of tools to decode BLE sensors and integrate those into smart home and IoT solutions such as Home Assistant with notably support for autodiscovery to automatically create the sensor. Theengs can be installed on various hardware from ESP32 to an Android phone or a Raspberry Pi SBC, and the solution currently supports close to forty BLE sensors from various companies including Xiaomi, Honeywell, and RuuviTag.   There are six components: The Theengs Decoder library developed in C++ for portability and translating data from sensors into human-readable data using the JSON format. The Python-based Theengs Gateway acting as a BLE to MQTT bridge for Home Assistant, OpenHAB, and NodeRED integration. It relies on the Theengs Decoder library and publishes the sensors broadcasted BLE information to an MQTT broker. The OpenMQTTGateway is also BLE to MQTT bridge, but instead of targetting Linux-capable hardware like Raspberry […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on ASRock Industrial iEPF-9010S/iEP-9010E Edge AIoT platforms feature Alder Lake S CPU, up to 128GB RAM

ASRock Industrial iEPF-9010S/iEP-9010E Edge AIoT platforms feature Alder Lake S CPU, up to 128GB RAM

ASRock Industrial iEPF-9010S & iEP-9010E Alder Lake S Edge AIoT platform

ASRock Industrial has released the iEPF-9010S and iEP-9010E high-end, rugged Edge AIoT platforms powered by 12th Gen Intel Alder Lake S processors, equipped with up to 128GB RAM, 4G LTE, 5G, Wi-Fi 6E, Bluetooth 5.2 connectivity, and real-time TSN/TCC networking. The I/O rich embedded computers are designed for highly demanding workloads and mission-critical industrial applications such as factory automation, machine automation, robotic control, AI-enabled AOI (automated optical inspection), autonomous vehicles, smart cities, and more. The ASRock iEPF-9010S Expandable AIoT Edge platforms come with the following specifications: SoC – Intel 12th Gen Core, Pentium or Celeron “Alder Lake S” hybrid processor with up to 16 cores and 24 threads, Intel Xe or UHD Graphics fitting in an LGA 1700 socket Chipset iEPF-9010S-EY4 model – Intel R680E iEPF-9012S-EY4 model – Intel H610 System Memory iEPF-9010S-EY4 model – 4x 260-pin SO-DIMM DDR4 3200MHz up to 128GB (32 GB per SO-DIMM) iEPF-9012S-EY4 model – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on UP 4000 SBC is a Raspberry Pi lookalike with an Intel Apollo Lake processor

UP 4000 SBC is a Raspberry Pi lookalike with an Intel Apollo Lake processor

UP 4000 SBC

AAEON has unveiled the UP 4000 single board computer with a form factor and ports arrangement similar to Raspberry Pi 2/3, but powered by a choice of x86 processors, namely the Intel Atom E3900 series, Celeron N3350, or Pentium N4200 all parts of the Apollo Lake family. The first UP Board was introduced in 2015 as a device offering an x86 alternative to the Raspberry Pi 2 with an Intel Atom x5-Z8300/Z8350 “Cherry Trail” processor, but later “UP bridge the gap” boards from the company used larger “Squared” (85.6 x 90 mm) or “Xtreme” (122 x 120 mm) form factors. The UP 4000 SBC brings us back to the original business card form factor but with a boost in performance and various specifications improvements. UP 4000 vs UP Board specifications   AAEON says the new board is able to deliver 30% faster CPU performance and twice the 3D graphics performance […]

Exit mobile version
EmbeddedTS embedded systems design