automation News - Page 10 of 60 - CNX Software

September 25, 2023September 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Bluetooth NLC (Networked Lighting Control) fully standardizes Bluetooth light bulbs

Bluetooth NLC (Networked Lighting Control) is a full-stack standard for wireless lighting control from the Bluetooth SIG that will enable multi-vendor interoperability, improve ease of deployment, and offer greater scalability. Bluetooth light bulbs have been around for many years, at first using Bluetooth LE (Radio Layer) and then adding Bluetooth Mesh (Network Layer) to the mix, but there were always some proprietary bits to the software stack, and Bluetooth NLC removes all those with a complete standard for lighting control that further adds Device Profiles specific to his use case. Bluetooth NLC still relies on Bluetooth Low Energy and Bluetooth Mesh, but adds the following NLC Device Profiles at the Device Layer defining the requirements for a range of devices/features: Ambient Light Sensor Basic Lightness Controller Basic Scene Selector Dimming Control Energy Monitor Occupancy Sensor You’ll find the specifications for each profile on the Bluetooth website. While the announcement was […]

September 24, 2023September 24, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

EDATEC ED-IPC2100 industrial computer offers 4x RS485/RS232 ports

EDATEC ED-IPC2100 industrial computer with RS485 and RS232 ports

EDATEC has launched four more Raspberry Pi CM4-powered industrial computers with the ED-IPC2100 Series that mostly differ from the earlier ED-IPC2010 model with an extra M.2 Key-B socket for an SSD, an extra Gigabit Ethernet port, and four COM ports with RS232 or RS485 interfaces depending on the exact model. The new ED-IPC2100 series industrial computer family ships with a Raspberry Pi Compute Module 4 with up to 8GB RAM, 32GB flash, optional WiFi 5 and Bluetooth 5.0, and offer a full-size HDMI video output, two Gigabit Ethernet port, and a few USB ports. The ED-IPC2120 model looks to offer some extra features such as an HDMI Touch FPC connector, MIPI CSI camera and DSI display connectors, and audio interfaces. ED-IPC2100-series specifications: SoM – Raspberry Pi CM4 SoC – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5GHz with VideoCore VI GPU System Memory – 1GB, 2GB, 4GB, or 8GB LPDRR4-3200 RAM […]

September 20, 2023September 20, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

PICO-EHL4-SEMI fanless mini PC is made for PoS and kiosk applications

AAEON PICO-EHL4-SEMI is a fanless Elkhart Lake mini PC designed for digital signage, smart retail (PoS and Kiosk), and industrial automation, and available with either the 10W quad-core Intel Celeron J6412 or the dual-core 6.5W Intel Celeron N6210. The mini supports up to 16GB LPDDR4X memory, 32 to 128GB eMMC flash, optional mSATA storage, and comes with a 4K capable HDMI 2.0b video output port, two Gigabit Ethernet ports, two USB 3.2 Gen 2 ports, and two optional COM ports providing RS232/RS422/RS485 connectivity. PICO-EHL4-SEMI specifications: Elkhart Lake SoC Intel Celeron J6412 quad-core processor @ 2.0GHz/3GHz; 10W TDP Intel Celeron N6210 dual-core processor @ 1.2GHz/3GHz; 6.5W TDP System Memory – Up to 16GB LPDDR4x 3200 MHz on-board memory Storage 32GB eMMC flash (optional 64GB/128GB) mSATA socket Video Output – 1x HDMI 2.0b ports up to 4Kx2K 60Hz Networking – 2x Gigabit Ethernet RJ45 port via Realtek RTL8111H-CG controller USB – 2x […]

September 20, 2023September 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Home Assistant Green – A $99 Home Assistant gateway with a Rockchip RK3566 processor

The developers of the popular Home Assistant open-source automation framework have introduced the Home Assistant Green gateway based on a Rockchip RK3566 processor providing a lower-cost alternative to the Raspberry Pi CM4-based Home Assistant Yellow gateway. The Home Assistant Green was created to cater to the needs of people who did not need all of the advanced features enabled in the Home Assistant Yellow gateway and also because of the supply and pricing issues with the Raspberry Pi CM4. Just like its predecessor, the new gateway ships with Home Assistant OS and comes with everything that beginners may need to get started with Home Assistant in just one box. Home Assistant Green specifications: SoC – Rockchip RK3566 CPU – Quad-core Arm Cortex-A55 processor @ 1.8 GHz GPU – Arm Mali-G52 2EE GPU NPU – 0.8 TOPS AI accelerator, VPU – 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System […]

September 18, 2023September 17, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Realtek RTL8852BE based WiFi 6 and Bluetooth 5.2 module targets Smart Home, industrial and healthcare applications

Realtek RTL8852BE WiFi 6 LGA & M2 modules

Telit Cinterion WE310K6-P is a dual-band Wi-Fi 6 and Bluetooth 5.2 based on the Realtek RTL8852BE wireless controller and designed to be integrated into connected devices for Smart Home, medical, industrial, and smart city applications. The WE310K6-P wireless is available in either LGA or M.2 module form factors and can operate in the -40°C to +85°C temperature range which should make it suitable for a wide range of Linux devices. Telit Cinterion WE310K6-P specifications: Wireless chipset – Realtek RTL8852BE Wi-Fi WiFi 6 802.11 a/b/g/n/ac/ax (2.4GHz, 5GHz) with 20MHz, 40MHz, or 80MHz bandwidth Dual-stream spatial multiplexing up to 1201 Mbps data rate Tx output – 19 dBm @ 2.4 GHz, 18 dBm @ 5 GHz Wi-Fi 802.11 e, h, k, i support Security features such as WPA3 and integrated crypto hardware Bluetooth Version 5.2 Dual mode with Bluetooth 2.1 Classic Bluetooth Low Energy up to 2 Mbps Bluetooth LE Audio (CIS) […]

September 11, 2023September 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SMLIGHT SLZB-06M Zigbee 3.0 PoE adapter gets Silabs EFR32MG21 microcontroller

SMLIGHT SLZB-06M is a Zigbee 3.0 to Ethernet, PoE, USB, or WiFi adapter designed to work with multi-vendor software systems such as Zigbee2MQTT and Home Assistant ZHA. This will let you integrate any supported Zigbee devices into smart home automation systems like Home Assistant, OpenHub, or HomeSeer. The SLZB-06M is a variant of the SLZB-06 Zigbee PoE adapter introduced last year with the main difference being the Zigbee chip as the new model is equipped with Silicon Labs EFR32MG21 microcontroller instead of Texas Instruments СС2652Р. An ESP32 WiFi and BLE chip is still used to work with peripherals such as the LAN8720 Ethernet chip and a CP2102N USB/UART converter chip. SMLIGHT SLZB-06M specifications: Wireless SoCs Silicon Labs EFR32MG21 Arm Cortex-M33 microcontroller @ 80 MHz with 352KB flash, 1024KB ROM for protocols and library functions, 96KB SRAM, integrated power amplifier, Bluetooth 5.2 Low Energy and 802.15.4 radios (Zigbee and Thread) Espressif […]

August 30, 2023August 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

LuckFox Pico Rockchip RV1103 Cortex-A7/RISC-V camera board comes with an optional Ethernet port

LuckFox Pico is a small Linux camera board based on the Rockchip RV1103 Cortex-A7 and RISC-V AI camera SoC and offered with an Ethernet port in a longer version of the PCB called LuckFox Pico Plus. Both models come with 64MB RAM (apparently embedded in RV1103), a microSD card slot for storage, a MIPI CSI camera connector, a USB Type-C port for power, and a few through holes for expansion through GPIO, I2C, UART, and so on. LuckFox Pico and Pico Plus specifications: SoC – Rockchip RV1103 with Arm Cortex-A7 processor @ 1.2GHz, RISC-V core, 64MB DDR2, 0.8 TOPS NPU, 4M @ 30 fps ISP Storage MicroSD card slot LuckFox Plus only – 1Gbit (128MB) SPI flash (W25N01GV) Camera – 2-lane MIPI CSI connector Networking (LuckFox Pico Plus only) – 10/100M Ethernet RJ45 port USB – USB 2.0 Host/Device Type-C port Expansion – 2x 20-pin headers with up to 24x […]

August 21, 2023August 21, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

EPIC-ADN9 SBC features up to four 2.5GbE interfaces, two SATA ports

AAEON EPIC-ADN9 SBC is powered by an Intel Processor N50/N97, Core i3-N305, or Atom x7425E Alder Lake N-series processor and equipped with up to four 2.5GbE networking ports and two SATA III ports for storage. The board also comes with a SO-DIMM slot taking up to 16GB DDR4 memory, mSATA storage, three display interfaces including HDMI and DisplayPort, and two USB 3.2 Gen 2 ports, and offers expansion capabilities via M.2 and mPCIe sockets as well as headers. AAEON EPIC-ADN9 specifications: Alder Lake-N SoC (one or the other) Intel Core i3-N305 octa-core processor @ 1.8 / 3.8 GHz (Turbo) with 6 MB cache, 32 EU Intel UHD Graphics up to 1.25 GHz; TDP: 15W Intel Atom x7425E quad-core processor @ 1.5 / 3.4 GHz (Turbo) with 6 MB cache, 24 EU Intel UHD Graphics up to 1.00 GHz; TDP: 12W Intel Processor N97 quad-core processor @ 2.0 / 3.6 GHz […]