Arduino News - Page 113 of 115 - CNX Software

June 12, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Souliss Automation and IoT Framework Makes Your Home Smarter

Souliss is an open-source framework written in C/C++ for the Internet of Things and home automation that runs on Arduino boards, or other Atmel AVR MCU based boards, and let your control lighting, heating, or anything else you can think of via your Android device, or switches connected to your board(s). You can get started with Souliss in 3 steps: Getting the building blocks, for example: Arduino, Olimex, or other AVR boards (See list of supported boards) Relay boards ON/OFF Switches, Lights, etc… Wi-Fi router Download and load Souliss to an AVR powered board controlling real things such as lights. Monitor and/or control via Souliss Home Automation App for Android. A detailed getting started guide is provided on Souliss Google Code page. Internally, the framework is composed of three parts: Souliss, an application level layer, MaCaco, a communication protocol and vNet, a transport layer. I’ll skip details in this post, […]

May 20, 2013May 20, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arduino Unveils the Arduino Robot at Maker Faire

On top of announcing its first Linux powered board, Arduino also announced its first official robot at Maker Faire Bay Area called “Arduino Robot”. The robot comes with 2 wheels and two boards: The Motor Board controlling the motors. The Control Board reading sensors and deciding how to operate. Each board, based on Atmel ATmega32u4 MCU, is programmable like any other Arduino board using the Arduino IDE. Control board specifications: MCU – Atmel ATmega32u4 @ 16 MHz with 32KB flash, 2.5KB SRAM, and 1KB EEPROM External Storage – 512 Kbit EEPROM (I2C) + SD card reader for FAT16 formatted cards Display – Full color LCD over SPI communication I/O interfaces: 5x Digital I/O Pins 6x PWM Channels 4x Analog Input Channels (of the Digital I/O pins) 8x Analog Input Channels (multiplexed) Misc – 5 keys keypad, Knob potentiometer attached to analog pin, 8 Ohm speaker, digital compass “Playground” – 3x I2C […]

May 19, 2013May 19, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$69 Linux Powered Arduino Yún Board is Designed for the Cloud

Massimo Banzi announced the Arduino Yún, the first of a family of Wi-Fi products combining Arduino with Linux, at the Maker Faire Bay Area. The company used the name Yún (云), meaning “cloud” in Chinese, as the purpose of this board to allow connection to web services directly from Arduino. Arduino Yun Specifications: MCU – Atmel ATMega32u4 @ 16 MHz (same as the one used in Leonardo board) with 2.5KB SRAM and 32KB flash SoC – Atheros AR9331 MIPS-based Wi-Fi SoC running Linino, Arduino’s own Linux distribution based on OpenWRT. It’s the same chipset as in TP-Link WR703N router. Storage – microSD card slot USB – micro USB connector + full USB host port Connectivity – Ethernet + Wi-Fi 14 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Arduino Yún ATMega32u4 can be programmed as a standard Arduino board by plugging it […]

May 15, 2013May 15, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Microchip Unveils 2 Arduino Compatible Boards, and a Prototype-Friendly PIC32 MCU

Microchip Technology has announced several new tools, expanding its Arduino compatible chipKIT platform ecosystem, based on Microchip’s 32-bit PIC32 microcontrollers (MCUs) available in low pin count SOIC or SPDIP packages. Digilent’s chipKIT DP32 board features basic I/O and interface components, including a prototyping aera, user buttons, and a potentiometer. The board (part # TDGL019) costs $23.9, and should be available on May 17 at microchipDIRECT. The chipKIT Fubarino Mini board, from a partnership between FUBAR Labs and Schmalz Haus, provides another option for Arduino-compatible development with 32-bit PIC32 MCUs, using a smaller form factor. The board is supposed to be available today for $19.95 on microchipDIRECT, but I could not find it yet. If you don’t want/need a development board, the company also provides PIC32MX250F128B MCU in PDIP package (28-pin) preprogrammed with chipKIT USB Bootloader. This MCU, clocked up to 40Mhz, includes 128 KB Flash and 32 KB RAM, as well […]

May 15, 2013May 15, 2013 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

DealExtreme 50% Discount on Mini PCs, Class 10 SD Cards, RF Remote Controls and More

DealExtreme has started a promotion that is taking place on May, 15-20 offering 50% discount on selected products. I’ve gone through the list, and found several RK3066 Android mini PCs all priced between $23 and $27, as well as some other items that may be of interest to readers of this blog. [Update: Sorry, in just a couple of hours, all items listed below are already sold out] Android Mini PCs: MK808 – $25.00 – One of the most used Android mini PC. Powered by Rockchip RK3066 with 1GB RAM, 8GB Flash. The version in DX runs Android 4.1.1, but a beta Android 4.2.2 firmware is also available. MK808B – $23.50 – Same as MK808, but with Bluetooth, and somehow it’s cheaper… Rikomagic MK802 IIIS – $27.10 – Rockchip RK3066 powered mini PC with 1GB RAM and 8GB Flash. Contrary to the previous 2 that feature a HDMI female connector, […]

May 6, 2013May 6, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Coocox Embedded Pi is an STM32-Based MCU Board That Connects to Arduino Shields and Raspberry Pi

Embedded Pi is a platform capable of interfacing the Raspberry Pi with 3.3V and/or 5V Arduino shields, based on an 32-bit ARM Cortex M3 STMicro STM32 MCU. It can also be used in standalone mode as an Arduino compatible ARM MCU evaluation board. Embedded Pi Hardware Specifications: MCU – STMicro STM32F103RBT6 Cortex M3 @ 72MHz with 20KB SRAM and 128KB flash. Raspberry Pi Connector with I2C, SPI, UART, PWM and GPIOs Arduino Interfaces – 1x SPI, 1x I2C, 4x PWM, 1x UART, 6x Analog Input Extended Interfaces – 1x SPI, 1x I2C, 1x UART with flow control, 2 pairs PWM, 6x Analog Input, and 1x CAN 3 Power Sources – Micro USB port, external DC adapter, and 5V from the Raspberry Pi Depending on the jumper placement on the Embedded Pi, you can select each of the three modes of operation: STM32/Standalone Mode – The Embedded Pi works as an […]

April 12, 2013December 24, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

UDOO Single Board Computer Features Freescale i.MX6 Dual/Quad and Atmel SAM3 MCU

Have you ever dreamed of a single board with the power of 4 Raspberry Pi and Arduino Due functionality? This dream should soon become reality thanks to UDOO single board computer. This open source hardware board is powered by Freescale i.MX6 Dual or Quad with 1GB RAM, as well as Atmel SAM3 Cortex M3 MCU that provides access to Arduino compatible headers. Here are the specifications of the board: SoC – Freescale i.MX6 ARM Cortex-A9 CPU Dual/Quad Core @ 1GHz + Vivante GPU MCU – Atmel SAM3X8E ARM Cortex-M3 (same as Arduino Due) System Memory – 1GB DDR3 Storage – micro SD (boot device) + SATA (i.MX6 Quad only) Video Output – HDMI and LVDS + Touch (I2C signals) Audio I/O – Analog Audio and Mic Expansion Headers – 54 Digital I/O + Analog Input (Arduino-compatible R3 1.0 pinout) Connectivity Ethernet RJ45 (10/100/1000 MBit) WiFi Module USB – mini USB […]

April 9, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Design West Summit – 23-25 April 2013

Design West 2013, previously known as the Embedded Systems Confertence, will take place later this month, on 23-25 April to be exact, at San Jose McEnery Convention Center in San Jose, California, US. The event will be divided into 22 tracks dealing with software development, hardware design, operating systems, security and more: Android Certificate Program – Two-day hands-on embedded android workshop. Black Hat Summit – The Black Hat Embedded Security Summit will provide electronics professionals with essential information and tools, as well as a forum for the discussion and evaluation of the latest solutions for securing their embedded systems. Training courses will focus on topics such as Network Security, Incident Response, Web Application Security, and Exploit Development. Connectivity and Networking – The Connectivity and Networking track educates design engineers on wired and wireless communications, spanning need-to-know topics from essentials of USB device development to antenna and RF system design. Debugging […]