Boardcon Idea3399 Features-Rich SBC Comes with M.2 NVMe SSD and 4G LTE PCIe Sockets

SBC M.2 NVMe SSD & mPCIe 4G LTE card

Back in 2017, Boardcon introduced EM3399 single board computer powered by a Rockchip RK3399 processor through the company’s PICO3399 SO-DIMM system-on-module. They’ve now designed another RK3399 SBC – Idea3399 – comprised of a baseboard and module, but instead of re-using the SO-DIMM module, CM3399 system-on-module with castellated holes was used instead. The new board comes with many of the same features as their first board but adds an M.2 NVMe SSD slot and mPCIe socket for 4G LTE modem on the back of the board. CM3399 SoM Key features and specifications: SoC – Rockchip RK3399 dual Cortex-A72 @ 1.8GHz + quad Cortex-A53 @ 1.4GHz System Memory – 4GB LPDDR4 Storage – 8GB eMMC flash 202 castellated pin (1.3mm pitch) with  USB2.0 host, USB3.0 host, USB OTG, UART, MIPI, Ethernet, SPI, HDMI out, I2C, I2S, PCI Express, SDIO, SD/MMC, eDP, Camera, PWM, ADC IN, etc… Power – Supply Voltage: 5V; RK808 […]

MINIX Unveils NEO T5 & NEO U22-XJ Amlogic S905X2 / S922XJ Android TV Media Hubs

Amlogic S922XJ TV Box

We’ve already seen MINIX showcased a fanless Gemini Lake mini PC at IFA 2019, but the company also had two upcoming Amlogic TV boxes on display at the event. MINIX NEO T5 features Amlogic S905X2 quad-core Cortex-A53 processor, while MINIX NEO U22-XJ TV box is powered by an Amlogic S922XJ hexa-core Cortex-A73/A53 processor. The former runs Android TV 9.0 with Google certification, while the latter comes pre-loaded with Android 9.0 OS. I had never heard about S922XJ, and apparently, Amlogic has yet to formally announce it, so I wonder whether it could be Amlogic S922X-B tipped by Khadas a while ago with higher CPU & GPU clock speeds. The processor will also come with Dolby Vision and Dolby Audio licenses, and Amlogic has a history of giving different processor names depending on the audio licenses. MINIX NEO T5 Specifications: SoC – Amlogic S905X2 quad-core Arm Cortex-A53 processor with Arm Mali-G31 […]

$70 NanoPi M4V2 SBC Gets 4GB LPDDR4 RAM, Power & Recovery Buttons

NanoPi M4V2

FriendlyELEC NanoPi M4 is a Rockchip RK3399 single board computer that follows Raspberry Pi 3 form factor, and was launched in a year ago for $65 with 2GB RAM, and $95 with 4GB RAM. Raspberry Pi 4 introduction brought some more competition, and helped the prices drop to $50 and $75 respectively. But now the company has launched a revision 2 of the board, NanoPi M4V2 that replaces LPDDR3 memory with faster LPDDR4 memory, adds power & recovery buttons, and the audio jack now also support microphone input. It’s only available with 4GB LPDDR4 memory, and the price is lower at $70. The rest of the specifications are mostly identical: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 @ up to 1.5GHz, a Mali-T864 GPU with support OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and a VPU with 4K VP9 and […]

Rikomagic R6 Mini Android Projector Looks Like a Vintage Radio

Rikomagic R6

Rikomagic has been releasing Android TV boxes at least since 2012, but in recent years the company has also started to work on Android projectors, and a couple of years ago I reviewed Rikomagic RKM R1 mini projector, and I was fairly satisfied despite the system using an entry-level quad-core Cortex-A7 processor (Rockchip RK3128). Based on the same industrial design, Rikomagic R5 projector launched in 2018 is more up-to-date to today’s user’s requirements with Rockchip RK3328 and 2GB RAM. But with Rikomagic R6 mini Android projector, the company is trying something different, at least in terms of appearance, as the projector looks like a vintage radio. Rikomagic R6 specifications: SoC – Rockchip quad-core processor System memory – 1 or 2GB DDR3 Storage – 8 or 16GB eMMC flash, microSD slot Projector 4000 lumens (real 70 ANSI lumens) Resolution – 720p physical lense; up to 1920×1080 output Contrast ratio – 2000:1 […]

Khadas VIM3L SBC up for pre-order for $50 and up, VIM1 & VIM2 Price Reduced

VIM3L pre-order

Shenzhen Wesion recently unveiled Khadas VIM3L SBC designed for HTPC / media center use cases. The board is based on Khadas VIM3 PCB but replaces the powerful Amlogic A311D processor by Amlogic S905D3 processor that should be just as good for video playback, but enable much cheaper hardware. Khadas VIM3L Pre-orders The board is not quite available yet, but the company has started to take pre-orders for Khadas VIM3L at discounted prices either as a bare board with Android 9.0 pre-installed ($49.99), or as a CoreELEC HTPC kit with enclosure, heatsink, WiFi antennas, and IR remote control ($69.99). Both feature Amlogic S905D3 quad-core Cortex-A55 processor coupled with 2GB LPDDR4(X) RAM, 16GB eMMC flash, and support 4Kp60 video output and playback with HDR support. Prices will increase with time as follows: September 3-16 (Early Bird) – $49.99 and $69.99 for the board and HTPC kit respectively September 17 – October 7 […]

Android 10 Released – What’s New?

Google released the first Android Q preview in March, and after several more preview, the company has finally released the latest version of the popular operating system which will simply be called Android 10, since Google dropped dessert names which previously led to confusion. What’s new in Android 10? Here’s a list of the new features that you can expect from Android 10: Privacy protection improvements – There’s more granular control over what apps can or cannot do in Android 10. Security improvements – Support for TLS 1.3 (up to 40% faster than TLS 1.2), and passive authentication methods such as face recognition Support for foldables and innovative new screens Sharing shortcuts – Let users jump directly into another app to share content. Settings Panels –  Floating UI invoked from an app to show system settings that users might need to adjust. Smart Reply in notifications – Contextual actions in […]

Fairphone 3 Socially Responsible Android Smartphone Launched for 450 Euros

Fairphone 3

Most phones today are disposable items, and if yours stops working for whatever reason it’s hard to repair it yourself work, and repairing it at the shop may prove to be too expensive. They are not really expandable either,  so if you want a new feature, you may have to buy a completely new phone instead of simply adding a module with the functionality. The difficulty in repairing the phone and the lack of modularity leading to electronics waste. Finally, consumer products are cost-optimized, and that’s great for your wallet, but it may come at the cost of being made by slave labor either directly at the factory, or indirectly through the mining of materials. Aren’t you already feeling bad being complicit in destroying the planet and sponsoring human suffering while reading this on your device? Good! But luckily there’s a solution with Fairphone that aims to be an ethical […]

Beelink GT-King (Amlogic S922X) TV Box Review

Beelink GT-King YouTube App

Rant Karl here. I have been playing around with Android boxes for several years. Unfortunately, some fundamental issues from when I first started playing around with these boxes are still there. They have come a long way since the MK808 with Rockchip RK3066 processor. The MK808 was my first endeavor into Android on the TV in 2013.  I can’t believe it’s been nearly 6 years. In 2014 Google introduced Android TV and the Nexus Player. It was designed for a TV and controller. The first boxes/sticks adapted the stock Android experience to run on a TV, but without a touch interface the experience was/is not optimal. Sure you get thousands and thousands of apps but a lot of them don’t work. Unfortunately, this hasn’t changed much. If these boxes came with Linux and Android I don’t think I would complain as much. I would consider it a tinkering box. But […]

UP 7000 x86 SBC